Namco Alpine Racer Operators Manual

							Part No. 90500040
Operators Manual
IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY AT
ALL
 TIMES, AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS MANUAL
ARE
 FOLLOWED PRECISELY, 
						

							No part of this publication may be reproduced by any mechanical, photographic or electronic
process, or in the form of phonographic recording, nor may it be stored in a retrieval system,
transmitted or otherwise copied for public or private use, without permission from
NAMCO EUROPE LTD.
While the information contained in this manual is given in good faith and was accurate at the
time of publication, NAMCO EUROPE LTD. reserve the right to make changes and alterations
without notice.
This machine has been manufactured in accordance with European Community directives
(1st. January 1996), and as such bears the 
 marking. Any changes or modifications to this
machine must be in accordance with European Community directives (1st. January 1996).
If you make any unauthorised changes to this product, you may contravene European
Community directives (1st. January 1996) © 1994  
 all rights reserved.
Published by:
NAMCO EUROPE LTD.
Namco House,
8 Acton Park Estate,
The Vale,
London. W3 7QE
Phone:- 0181-324-6000
Fax:- 0181-324-6010 
						

							SAFETY WARNING
In order to use this machine safely, be sure to read this Operators Manual carefully
before installation, adjustment or use of this machine. Whenever the owner of this machine entrusts disassembly, installation, adjustment,
routine maintenance or trouble shooting to another person, the owner sho\
uld ensure 
that that person read the appropriate precautions and relevant sections \
of this manual
before starting work. In order that no accidents occur when the machine is in operation, 
strictly
follow the notes on safety described belo w. Also, carefully read  section 2,
Precautions
Warnings for Operation ( Requirements)
NOTE:Only operate this machine after checking that it has been installed corr\
ectly
and in accordance with the installation and commisioning manual.
NOTE:Parts of this machine move during game play, so there are places where the
distance between the stationary section and moveable section changes. There are warning notices to keep hands and feet clear of moving parts,
however if the operator feels that a person is in any danger, he should warn 
that person accordingly.
NOTE:The warning notices must always be kept in good condition and replaced i\
f
worn, so that the customer can read it clearly.
NOTE:If there is an error or problem with this machine, operation must be
stopped immediately and the problem rectified before further use.
Warnings for Disassembly, Installation, Routine Maintenance, and Troubleshooting.
DANGER:Namco Ltd. bears absolutely no responsibility for accidents or injuries
resulting from unauthorized changes to this machine.
DANGER:Ensure that the machine has been turned  OFF before making adjustments
or carrying out maintenance. Also ensure only qualified personnel carry
out maintenance or turn the power  ON to this machine.
DANGER:The power supply and inside the monitor will remain hot and have areas o\
f
high voltage even though the machine has been turned OFF, and there is
a possibility of burns or electric shock. Be careful not to touch these \
areas.
DANGER:In order to avoid injuries due to mis-operation, be sure that the voltag\
e of
the main power supply is within the prescribed limits. Also to prevent
possible electric shocks due to failure, this machine  MUST be fitted with a
securely connected earthed plug.
NOTE:Do not turn the power switch  ON until the machine has been installed
correctly. 
						

							Page 5
1. SPECIFICATIONS
POWER SUPPLY :-220/240volts AC
MONITOR :-Philips 46 Projector Monitor (46PP912A/05)
COIN ACCEPTORMars CashFlow - 1 Channel
DIMENSIONS :-
Assembled 1265(w) x 2245(d) x 2300(h)
Monitor Cabinet 1145(w) x 645(d) x 1920(h)
Ski Assembly 1265(w) x 1600(d) x 1220(h)
Header 1145(w) x 350(d) x 380(h)
WEIGHT :-
Assembled 433kg
Monitor Cabinet 175kg
Ski Assembly 240kg
Header18kg
ACCESSORIES :-Keys: (Cash Door) ............................. 2
(Coin Door) .............................. 2
(Service Door) .......................... 2
IEC Mains Lead ............................................. 1
Operators Manual .......................................... 1
Installation Manual ........................................ 1
Monitor Manual .............................................. 1
Monitor Remote Control W/Batteries ............ 1
Cashflow Data ............................................... 1
Floor Safety Mat & Decal .............................. 1
Floor Safety Mat Securing Plate ................... 2
Floor Safety Mat Support Bracket ................. 2
Joint Bracket .................................................. 2
Potentiometer ................................................ 1
M10x25 Hex Head Set Screw - S/Steel ........ 8
M10 Flat Washer - S/Steel ............................ 8
M10 Spring Washer - S/Steel ........................ 8
M8x20 Hex Head Set Screw - S/Steel .......... 4
M8 Flat Washer - S/Steel .............................. 4
M8 Spring Washer - S/Steel .......................... 4
M6 Dome Head Nut - Chrome ...................... 6
M6X25 Hex Head Screw - BZP ..................... 2
M6 Flat Washer H/Duty - BZP ....................... 2
M6 Spring Washer - BZP .............................. 2
M4 Security Wrench ...................................... 1
M5 Security Wrench ...................................... 1
M6 Security Wrench ...................................... 1 
						

							Page 6
2. PRECAUTIONS
Be sure to read this section carefully.
2-1 Notes on Operation ( Requirements)
2-2 Safety Mechanisms and Controls For safety, this machine is equipped with a locking mechanism for securing the ste\
ps 
when the machine is not being played. 
• The step locking mechanism is controlled as describe below.
a. After selecting the course, the step lock is released before game start.\
b. At game over, the steps are locked.
c. If the steps are moved left or right while they are locking or unlocking\
, the motor temporarily stops in order to prevent damage to the step-lock motor. When the 
steps are no longer being moved left or right, the motor will restart. T\
o prevent
damage from occurring, do not move the steps while the motor is running.\
d. When the machine is first turned ON, the step-lock mechanism is checked automatically by unlocking and re-locking the steps.
e. If the step-locking  system fails, an error message will be displayed on\
 the monitor screen.
Refer to section 6-4-3  Handling Motor Errors and  section 8 Trouble Shooting.
NOTE:Only operate this machine after checking that it has been installed corr\
ectly 
and in accordance with the Installation and Commisioning Manual.
NOTE:Parts of this machine move during game play, so there are places where the 
distance between the stationary section and moveable section changes.
NOTE:There is a warning sticker that the player must be wearing flat shoes, 
unsuitable footwear e.g. high heel shoes could cause the player to lose
balance and fall. However if the operator feels that a customer playing \
the
game is in any danger, he should warn the customer accordingly.
NOTE:The warning sticker must always be kept in good condition so that the 
customer can read it clearly, and be replaced if worn.
NOTE:Ensure customer safety at all times. Be especially careful in the case o\
f 
young children, who should be supervised by an adult at all times.
NOTE:If there is an error or problem with this machine,  operation must be
stopped immediately.
NOTE:Service, adustments and routine maintenance should be carried out by 
qualified personel only.
Parts of this machine swing to the left and right during game play. In  order to
maintain the customers safety , the operator should strictly follow the
appropriate precautions. 
						

							Page 7
2-3 Cautions When Transporting.
a. Do not subject the game to physical shock when transporting or moving it.
b. Always return the levellers to the UP position before moving the machine, even
for short distances.
c. The monitor cabinet, ski assy and header assy must be separated before
shipping.
d. Take care not to rope any moulded (plastic) parts when transporting.
e. Always ship the monitor section upright.
THIS MACHINE IS NOT DESIGNED TO BE MOVED BY FORK LIFT. 
DO NOT USE 
						

							Page 8 2. If this machine is installed next to walls or other machines, ensure that there is
plenty of space between them.
2-4 Cautions When Installing.
1. This machine is designed for indoor use only. 
Do Not install the machine in the
following places 
						

							Page 9
NOTE:So that customers are not injured by the movement of the Ski Tray, ensure that
there is at least 300mm separation between other machines or walls.
If two Alpine Racer machines are next to each other the space between them
must be at least 600mm.
NOTE:In order to gain access to the Power Supply and CPU assemblies, make sure that
the rear of the machine is separated from a wall or other machine by at least
500mm. 
						

							Page 10
3. HOW TO PLAY
This game is based on Alpine ski racing.
The player stands on the steps and moves them left or right to control the skier.
By using the inner edge when moving the steps, the skier slows down and turns
quickly.
• Race Mode
The player races the computer skiers and the object is to cross the goal line first.
The game is over when the player crosses the finish line within the given time
period, or the time period reaches zero. The time period is increased each time a
player passes a check point.
If a player wins in a fast time they can enter their initials. Select letters using the
select buttons and enter them by using the decision (Viewpoint) button.
• Time-Trial Mode
The object of the game is to pass between the flags (gates) and to cross the
finish line in the fastest time. The rules require the player to go through the gates,
so more technique is needed for this mode than the normal race mode.
The game is over when the player crosses the finish line within the given time
period, or the time period reaches zero. The time period is increased by one
second each time a player passes through a gate.
If a player completes a course in a fast time they can enter their initials. Select
letters using the select buttons and enter them by using the decision (Viewpoint)
button.
A player is not disqualified for not passing through a gate, however the player will
not be able to enter their initials even if they cross the finish line in a good time.
• Game Mode Selection
After inserting sufficient credit, the Game Mode Selection screen is displayed.
The player selects either the Race Mode or Time-Trial Mode by using the L/R
selection buttons, and pressing the decision (Viewpoint) button.
• Course Selection
After the game mode has been selected, the Course Selection screen is
displayed.
The player can select one of three courses, Novice, Intermediate and
Expert.
• Viewpoint Selection
The viewpoint button can pressed at any time during a game to switch between
the players view and behind view.
Players View: This is the view as seen by the skier. This provides an exciting
view while skiing. The race mode starts in this view.
Behind View: This is the view from behind the skier. This view can be used to
get an understanding of the skiers posture and surrounding
conditions. The time trial mode starts in this position. 
						

							Page 11
4. MAJOR COMPONENTS