MSI Z97 Gaming 3 Manual
Here you can view all the pages of manual MSI Z97 Gaming 3 Manual. The MSI manuals for Motherboard are available online for free. You can easily download all the documents as PDF.
Page 21
1-7 Connectors Quick Guide CPUFAN1 PCI_E1 PCI_E2 PCI_E3 PCI_E4 PCI1 JPWR1 SATA1_2 SATA3_4 SATA5 JPWR2CPU Socket BackPanel JUSB3 M2_1 JTPM1 DIMM1DIMM2DIMM3DIMM4 CPUFAN2 SYSFAN3 JCI1 JFP1JFP2 JUSB1JUSB2 SYSFAN2 SYSFAN1 JAUD1 JBAT SATA6 JLPT1 JCOM1 AUDPWR1 AUD_SW1 PCI2 PCI3 JTBT1* * JTBT1 is used to connect a specific card. Chapter 1 Getting Started
Page 22
1-8 Connectors Reference Guide Port Name Port Type Page AUD_SW1 Audio Power Switch 1-28 AUDPWR1 Direct Audio Power Connector 1-24 Back Panel 1-9 CPU LGA1150 CPU Socket 1-11 CPUFAN1~2,SYSFAN1~3 Fan Power Connectors 1-21 DIMM1~4 Memory Slots 1-15 JAUD1 Front Panel Audio Connector 1-24 JBAT1 Clear CMOS Jumper 1-27 JCI1 Chassis Intrusion Connector 1-26 JCOM1 Serial Port Connector 1-26 JFP1, JFP2 System Panel Connectors 1-22 JLPT1 Parallel Port Connector 1-25 JPWR1~2 ATX Power...
Page 23
![Page 23
1-9
Back Panel Quick Guide
▶PS/2 Keyboard/Mouse Combo Port
A combination of PS/2® mouse/keyboard DIN connector for a PS/2® mouse/keyboard.
▶USB 2.0 Port
The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mous\
e, or other
USB 2.0-compatible devices.
▶USB 3.0 Port
USB 3.0 port is backward-compatible with USB 2.0 devices. It supports da\
ta transfer
rate up to 5 Gbit/s (SuperSpeed).
Important
In order to use USB 3.0 devices, you must connect to a USB 3.0 port. If \
a USB cable is...](http://img.usermanuals.tech/thumb/53/93451/w300_d_1504098165-msi-z97-gaming-3-manual_d-22.png "Page 23
1-9
Back Panel Quick Guide
▶PS/2 Keyboard/Mouse Combo Port
A combination of PS/2® mouse/keyboard DIN connector for a PS/2® mouse/keyboard.
▶USB 2.0 Port
The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mous\
e, or other
USB 2.0-compatible devices.
▶USB 3.0 Port
USB 3.0 port is backward-compatible with USB 2.0 devices. It supports da\
ta transfer
rate up to 5 Gbit/s (SuperSpeed).
Important
In order to use USB 3.0 devices, you must connect to a USB 3.0 port. If \
a USB cable is...")
1-9 Back Panel Quick Guide ▶PS/2 Keyboard/Mouse Combo Port A combination of PS/2® mouse/keyboard DIN connector for a PS/2® mouse/keyboard. ▶USB 2.0 Port The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mous\ e, or other USB 2.0-compatible devices. ▶USB 3.0 Port USB 3.0 port is backward-compatible with USB 2.0 devices. It supports da\ ta transfer rate up to 5 Gbit/s (SuperSpeed). Important In order to use USB 3.0 devices, you must connect to a USB 3.0 port. If \ a USB cable is...
Page 24
![Page 24
1-10
▶HDMI Port
®
The High-Definition Multimedia Interface (HDMI) is an all-digital audio-video interface
that is capable of transmitting uncompressed streams. HDMI supports all \
types of TV
formats, including standard, enhanced, or high-definition video, plus multi-channel
digital audio on a single cable.
▶DisplayPort
DisplayPort is a digital display interface standard. This connector is u\
sed to connect a
monitor with DisplayPort inputs.
▶VGA Port
The DB15-pin female connector is provided...](http://img.usermanuals.tech/thumb/53/93451/w300_d_1504098165-msi-z97-gaming-3-manual_d-23.png "Page 24
1-10
▶HDMI Port
®
The High-Definition Multimedia Interface (HDMI) is an all-digital audio-video interface
that is capable of transmitting uncompressed streams. HDMI supports all \
types of TV
formats, including standard, enhanced, or high-definition video, plus multi-channel
digital audio on a single cable.
▶DisplayPort
DisplayPort is a digital display interface standard. This connector is u\
sed to connect a
monitor with DisplayPort inputs.
▶VGA Port
The DB15-pin female connector is provided...")
1-10 ▶HDMI Port ® The High-Definition Multimedia Interface (HDMI) is an all-digital audio-video interface that is capable of transmitting uncompressed streams. HDMI supports all \ types of TV formats, including standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. ▶DisplayPort DisplayPort is a digital display interface standard. This connector is u\ sed to connect a monitor with DisplayPort inputs. ▶VGA Port The DB15-pin female connector is provided...
Page 25
![Page 25
1-11
CPU (Central Processing Unit)
Important
OverheatingOverheating can seriously damage the CPU and motherboard. Always make su\
re the cooling fans work properly to protect the CPU from overheating. Be sure \
to apply an even layer of thermal paste (or thermal tape) between the CPU and the \
heatsink to enhance heat dissipation.
Replacing the CPU
When replacing the CPU, always turn off the system’s power supply and unplug the power supply’s power cord to ensure the safety of the CPU.
Overclocking
This...](http://img.usermanuals.tech/thumb/53/93451/w300_d_1504098165-msi-z97-gaming-3-manual_d-24.png "Page 25
1-11
CPU (Central Processing Unit)
Important
OverheatingOverheating can seriously damage the CPU and motherboard. Always make su\
re the cooling fans work properly to protect the CPU from overheating. Be sure \
to apply an even layer of thermal paste (or thermal tape) between the CPU and the \
heatsink to enhance heat dissipation.
Replacing the CPU
When replacing the CPU, always turn off the system’s power supply and unplug the power supply’s power cord to ensure the safety of the CPU.
Overclocking
This...")
1-11 CPU (Central Processing Unit) Important OverheatingOverheating can seriously damage the CPU and motherboard. Always make su\ re the cooling fans work properly to protect the CPU from overheating. Be sure \ to apply an even layer of thermal paste (or thermal tape) between the CPU and the \ heatsink to enhance heat dissipation. Replacing the CPU When replacing the CPU, always turn off the system’s power supply and unplug the power supply’s power cord to ensure the safety of the CPU. Overclocking This...
Page 26
![Page 26
1-12
CPU & Heatsink Installation
When installing a CPU, always remember to install a CPU heatsink. A CPU \
heatsink
is necessary to prevent overheating and maintain system stability. Follo\
w the steps
below to ensure correct CPU and heatsink installation. Wrong installatio\
n can damage
both the CPU and the motherboard.
1. Push the load lever down to unclip it and lift to the fully open position.
2. The load plate will automatically lift up as the load lever is pushed to the fully open
position....](http://img.usermanuals.tech/thumb/53/93451/w300_d_1504098165-msi-z97-gaming-3-manual_d-25.png "Page 26
1-12
CPU & Heatsink Installation
When installing a CPU, always remember to install a CPU heatsink. A CPU \
heatsink
is necessary to prevent overheating and maintain system stability. Follo\
w the steps
below to ensure correct CPU and heatsink installation. Wrong installatio\
n can damage
both the CPU and the motherboard.
1. Push the load lever down to unclip it and lift to the fully open position.
2. The load plate will automatically lift up as the load lever is pushed to the fully open
position....")
1-12 CPU & Heatsink Installation When installing a CPU, always remember to install a CPU heatsink. A CPU \ heatsink is necessary to prevent overheating and maintain system stability. Follo\ w the steps below to ensure correct CPU and heatsink installation. Wrong installatio\ n can damage both the CPU and the motherboard. 1. Push the load lever down to unclip it and lift to the fully open position. 2. The load plate will automatically lift up as the load lever is pushed to the fully open position....
Page 27
![Page 27
1-13
3. Align the notches with the socket alignment keys. Lower the CPU straight down,
without tilting or sliding the CPU in the socket. Inspect the CPU to che\
ck if it is
properly seated in the socket.
4. Close and slide the load plate under the retention knob. Close and engage the
load lever.
Alignment Key
CPU notches
Retention knob
5. When you press down the load lever the PnP cap will automatically pop up from
the CPU socket. Do not discard the PnP cap. Always replace the PnP cap i\
f the
CPU...](http://img.usermanuals.tech/thumb/53/93451/w300_d_1504098165-msi-z97-gaming-3-manual_d-26.png "Page 27
1-13
3. Align the notches with the socket alignment keys. Lower the CPU straight down,
without tilting or sliding the CPU in the socket. Inspect the CPU to che\
ck if it is
properly seated in the socket.
4. Close and slide the load plate under the retention knob. Close and engage the
load lever.
Alignment Key
CPU notches
Retention knob
5. When you press down the load lever the PnP cap will automatically pop up from
the CPU socket. Do not discard the PnP cap. Always replace the PnP cap i\
f the
CPU...")
1-13 3. Align the notches with the socket alignment keys. Lower the CPU straight down, without tilting or sliding the CPU in the socket. Inspect the CPU to che\ ck if it is properly seated in the socket. 4. Close and slide the load plate under the retention knob. Close and engage the load lever. Alignment Key CPU notches Retention knob 5. When you press down the load lever the PnP cap will automatically pop up from the CPU socket. Do not discard the PnP cap. Always replace the PnP cap i\ f the CPU...
Page 28
![Page 28
1-14
Important
• Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.
• Whenever the CPU is not installed, always protect the CPU socket pins by\
covering the socket with the plastic cap.
• If you purchased a separate CPU and heatsink/ cooler, Please refer to th\
e documentation in the heatsink/ cooler package for more details about ins\
tallation.
7. Locate the CPU fan connector on the motherboard.
8. Place the heatsink on the motherboard with the fan’s...](http://img.usermanuals.tech/thumb/53/93451/w300_d_1504098165-msi-z97-gaming-3-manual_d-27.png "Page 28
1-14
Important
• Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.
• Whenever the CPU is not installed, always protect the CPU socket pins by\
covering the socket with the plastic cap.
• If you purchased a separate CPU and heatsink/ cooler, Please refer to th\
e documentation in the heatsink/ cooler package for more details about ins\
tallation.
7. Locate the CPU fan connector on the motherboard.
8. Place the heatsink on the motherboard with the fan’s...")
1-14 Important • Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system. • Whenever the CPU is not installed, always protect the CPU socket pins by\ covering the socket with the plastic cap. • If you purchased a separate CPU and heatsink/ cooler, Please refer to th\ e documentation in the heatsink/ cooler package for more details about ins\ tallation. 7. Locate the CPU fan connector on the motherboard. 8. Place the heatsink on the motherboard with the fan’s...
Page 29
![Page 29
1-15
Memory
These DIMM slots are used for installing memory modules.
DIMM1DIMM2 DIMM3 DIMM4
Video Demonstration
Watch the video to learn how to install memories at the address below.
http://youtu.be/76yLtJaKlCQ
Dual-Channel mode Population Rule
In Dual-Channel mode, the memory modules can transmit and receive data w\
ith two
data bus channels simultaneously. Enabling Dual-Channel mode can enhance\
system
performance. The following illustrations explain the population rules fo\
r Dual-Channel
mode....](http://img.usermanuals.tech/thumb/53/93451/w300_d_1504098165-msi-z97-gaming-3-manual_d-28.png "Page 29
1-15
Memory
These DIMM slots are used for installing memory modules.
DIMM1DIMM2 DIMM3 DIMM4
Video Demonstration
Watch the video to learn how to install memories at the address below.
http://youtu.be/76yLtJaKlCQ
Dual-Channel mode Population Rule
In Dual-Channel mode, the memory modules can transmit and receive data w\
ith two
data bus channels simultaneously. Enabling Dual-Channel mode can enhance\
system
performance. The following illustrations explain the population rules fo\
r Dual-Channel
mode....")
1-15 Memory These DIMM slots are used for installing memory modules. DIMM1DIMM2 DIMM3 DIMM4 Video Demonstration Watch the video to learn how to install memories at the address below. http://youtu.be/76yLtJaKlCQ Dual-Channel mode Population Rule In Dual-Channel mode, the memory modules can transmit and receive data w\ ith two data bus channels simultaneously. Enabling Dual-Channel mode can enhance\ system performance. The following illustrations explain the population rules fo\ r Dual-Channel mode....
Page 30
![Page 30
1-16
Mounting Screw Holes
When installing the motherboard, first install the necessary mounting stands required
for an motherboard on the mounting plate in your computer case. If there\
is an
I/O back plate that came with the computer case, please replace it with \
the I/O
backplate that came with the motherboard package. The I/O backplate shou\
ld snap
easily into the computer case without the need for any screws. Align the\
mounting
plate’s mounting stands with the screw holes on the motherboard...](http://img.usermanuals.tech/thumb/53/93451/w300_d_1504098165-msi-z97-gaming-3-manual_d-29.png "Page 30
1-16
Mounting Screw Holes
When installing the motherboard, first install the necessary mounting stands required
for an motherboard on the mounting plate in your computer case. If there\
is an
I/O back plate that came with the computer case, please replace it with \
the I/O
backplate that came with the motherboard package. The I/O backplate shou\
ld snap
easily into the computer case without the need for any screws. Align the\
mounting
plate’s mounting stands with the screw holes on the motherboard...")
1-16 Mounting Screw Holes When installing the motherboard, first install the necessary mounting stands required for an motherboard on the mounting plate in your computer case. If there\ is an I/O back plate that came with the computer case, please replace it with \ the I/O backplate that came with the motherboard package. The I/O backplate shou\ ld snap easily into the computer case without the need for any screws. Align the\ mounting plate’s mounting stands with the screw holes on the motherboard...