MSI P6ngml Manual

1-1 Getting StartedGetting Started Chapter 1
Thank you for choosing the P6NGM Series (MS-7366
v1.X) Micro-ATX mainboard. The P6NGM Series
mainboards are based on GeForce®
 MCP73U/PV/V
chipset for optimal system efficiency. Designed to fit
the advanced Intel®
 Pentium 4 LGA775 processor,
the P6NGM Series deliver a high performance and pro-
fessional desktop platform solution.7366v1.0-1.p65  2007/10/1, 下午 03:431 

MS-7366 Mainboard
1-2 Mainboard Specifications
Processor Support
- Supports Intel ®
 Core 2 Quad, Core 2 Duo, Pentium, Celeron
   processors in the LGA775 package.
(For the latest information about CPU, please visit
http://www.msi.com.tw/cpusupport.htm )
Supported FSB
- Supports FSB up to 1333 MHz (for 73U/PV)
- Supports FSB up to 1066 MHz (for 73V)
Chipset
- Nvidia MCP73U/PV/V chipest
Memory Support
- DDR2 533/667/800 SDRAM (240pin/ non-ECC) (for 73U/PV)
- DDR2 533/667 SDRAM (240pin/ non-ECC) (for...

1-3 Getting StartedConnectors
Back panel
- 1 PS/2 mouse port
- 1 PS/2 keyboard port
- 1 VGA port
- 1 HDMI port (optional)
- 1 DVI port (optional)
- 1 IEEE1394 port (optional)
- 4 USB 2.0 Ports
- 1 LAN jack
- 6 audio jacks
On-Board Pinheaders
- 3 USB 2.0 pinheaders (for 73U/PV)
- 2 USB 2.0 pinheaders (for 73V)
- 1 IEEE1394 pinheader (optional)
- 1 Chassis Intrusion Switch pinheader
- 1 Serial port pinheader
- 1 SPDIF-Out pinheader
- 1 Front Panel Audio pinheader
- 1 CD-In pinheader
- 1 TPM pinheader...

MS-7366 Mainboard
1-4P6NGM Series
(MS-7366 v1.X) ATX MainboardMainboard LayoutPCI 2
PCI 1
PCI _E2
PCI _E1
BATT+
IDE 1PWR2
FDD 1JFP2JCOM1JFP1
JCI1JUSB1JUSB2JUSB3(optional)JSP1J1394_1(optional)
SATA2SYSFAN1
J1
SATA3
SATA1
DIMM1
DIMM2
SATA4
JTPM1
(optional)
JAUD1 ALC888CPUFAN
PWR1
RTL8211BL
/ 8201CLRTLTop : mouse 
Bottom:
keyboard
Top: LAN Jack
Bottom: USB ports  Top:1394 
Bottom: USB ports (optional)T:Line-In
M:Line-Out
B:Mic
T:RS-Out
M:CS-Out
B:SS-OutHDMI Port (optional)
NVIDIAMCP73U/PV/V
Top:VGA Port...

1-5 Getting StartedPacking Checklist
* The pictures are for reference only and may vary from the packing contents of the
product you purchased.Power CableSATA Cable
MSI motherboardMSI Driver/Utility CDBack IO ShieldStandard Cable for
IDE DevicesUser’s Guide7366v1.0-1.p65  2007/10/1, 下午 03:435 

This chapter tells you how to install the CPU, memory modules,
and expansion cards, as well as how to setup the jumpers on
the mainboard. Also, it provides the instructions on connecting
the peripheral devices, such as the mouse, keyboard, etc.
While doing the installation, be careful in holding the components
and follow the installation procedures.Hardware Setup Chapter 27366v1.0-2-Hardware.p65  2007/10/1, 下午 03:431 

MS-7366 Mainboard
2-2Quick Components Guide
PWR1, p.2-8CPU, p.2-3CPUFAN, p.2-12DIMM Slots,
 p.2-7
FDD1,
 p.2-12
JCI1,
 p.2-13
PWR2,
 p.2-8
IDE1,
 p.2-11
SYSFAN1,
 p.2-12
SATA 1~4,
 p.2-12
JTPM1,
 p.2-17
JCOM1,
 p.2-15
J1,
 p.2-18 JFP1, JFP2,
 p.2-14 J1394_1,
 p.2-16
JSP1,
 p.2-13 JUSB1~3,
 p.2-16 Back Panel,
 p.2-9
PCIE,
 p.2-19
PCI, p.2-19
JCD1, p.2-13
JAUD1, p.2-157366v1.0-2-Hardware.p65  2007/10/1, 下午 03:432 

2-3 Hardware SetupCPU (Central Processing Unit)
This mainboard supports Intel®
 Pentium 4 in LGA 775 package. When you are installing
the CPU, make sure to install the cooler to prevent overheating. If you do not
have the CPU cooler, consult your dealer before turning on the computer.
For the latest information about CPU, please visit http://global.msi.com.tw/index.
php?func=cpuformIntroduction to LGA 775 CPU
The surface of LGA 775 CPU.
Remember to apply some ther-
mal paste on it for better heat...

MS-7366 Mainboard
2-4Important
1.Confirm if your CPU cooler is firmly installed before turning on your system.
2. Do not touch the CPU socket pins to avoid damaging.
3. The availability of the CPU land side cover depends on your CPU packing.2.Remove the cap from lever hinge
side (as the arrow shows). 1.The CPU socket has a plastic cap
on it to protect the contact from
damage. Before you install the CPU,
always cover it to protect the socket
pin. CPU & Cooler Installation
When you are installing the CPU,...

2-5 Hardware Setup
6.After confirming the CPU direction
for correct mating, put down the
CPU in the socket housing frame.
Be sure to grasp on the edge of
the CPU base. Note that the align-
ment  keys are matched.
8.Cover the load plate onto the
package.7.Visually inspect if the CPU is
seated well into the socket. If not,
take out the CPU with pure vertical
motion and reinstall.alignment
key 5.Lift the load lever up and open the
load plate.7366v1.0-2-Hardware.p65  2007/10/1, 下午 03:435