MSI Km4mv Manual

							MS-6734 M-ATX Mainboard
4-12
Put a check mark in the check box to install the feature you want. Then click  Next
button to proceed the installation. 
						

							VIA VT8237 Serial ATA RAID Introduction
4-13 Once the installation is complete, go to Start ---> Programs --->VIA --->raid_tool.
exe to enable VIA RAID Tool.
After the software is finished installation, it will automati-
cally started every time Windows is initiated. You may
double-click on the          icon shown in the system tray of
the tool bar to launch the VIA RAID Tool utility.
Using VIA RAID Tool
The main interface is divided into two windows and the toolbar above contain the
main functions. Click on these toolbar buttons to execute their specific functions.
The left windowpane displays the controller and disk drives and the right window-
pane displays the details of the controller or disk drives. The available features are
as following:
View by Controller
View Event log View by Devices
Help Topics 
						

							MS-6734 M-ATX Mainboard
4-14
Click on the plus (+) symbol next to Array 0---RAID 0 to see the details of each disk.
Click on o rbutton to determine the viewing type of left window pane.
There are two viewing types: By controllers and by device.  Click on the object in the
left window pane to display the status of the object in the right windowpane. The
following screen shows the status of Array 0---RAID 0. 
						

							VIA VT8237 Serial ATA RAID Introduction
4-15
You may also use the same o r button to view the statuses of Array 0-
--RAID 1.
Click on the plus (+) symbol next to Array 0---RAID 1 to see the details of each disk.