MSI K7t266 Pro2u Manual

							A-6
MS-6593 ATX Mainboard
Testing the Connected Speakers
To ensure that 4- or 6-channel audio operation works properly, you may
need to test each connected speaker to make sure every speaker work properly.
If any speaker fails to sound, then check whether the cable is inserted firmly
to the connector or replace the bad speakers with good ones.
Testing Each Speaker:
1. Click the audio icon  from the window tray at the lower-right corner
of the screen.
2. Click the Speaker Test tab.
3. The following window appears.  Select the speaker which you want to
test by clicking it.
Subwoofer
Front Right
Rear Right
Center Front Left
Rear Left
MSI Reminds You...
6 speakers appear on the “Speaker Test” window only when
you select “6 channels mode” in the “No. of Speakers” column.
If you select “4 channels mode”, only 4 speakers appear on the
window.  Or, If you select “Headphone”, only a headphone
appears on the window. 
						

							A-7
Using 4- or 6-Channel Audio Function
4. While you are testing the speakers in 6-Channel mode, if the sound
coming from the center speaker and subwoofer is swapped, you should
select Swap Center/Subwoofer Output to readjust these two channels.
Select this function 
						

							A-8
MS-6593 ATX Mainboard
Playing KaraOK
The KaraOK function will automatically remove human voice (lyrics)
and leave melody for you to sing the song. This function applies only to 2-
channel audio operation, so make sure “2-Channel Mode” is selected in the
“No. of Speakers” column before playing KaraOK.
Playing KaraOK
1. Click the audio icon  from the window tray at the lower-right corner
of the screen.
2. Select Voice Cancellation in the “KaraOK” column under the Sound
Effect tab.
3. Click OK to close this window.
2
3