MSI 945gm2 H Manual

Introduction to DigiCell4-7Access Point Mode
Click on “Setting” button of the Access Point Mode and the following screen will
display.IP Sharing
Click on this icon to enable/disable the IP sharing. The default of this setting is disabled.
Enabling/disabling IP sharing depends on the different situation. For example:
1.If your family and you are getting on Internet at home with multi computers, and
your ISP only provides one IP for you, you may need to enable IP Sharing
function in order to use this one...

4-8MS-7210 Micro-ATX Mainboard
WLAN Card Mode
Click on “Setting” button of the WLAN Card Mode for the WEP status of your APs.
If the AP you are selecting (the highlighted one) is not encrypted (Disabled shown in
the Encryption column), the screen will display as below. You can click “Connect”
to make connection to that AP, click “Cancel” to close this dialogue box, or click
“Refresh” button to update the available WLAN connections.
If the network you are selecting is encrypted (WEP shown in the...

Introduction to DigiCell4-9Live Update
Click on the Live Update icon in the main menu and the Live Update program will be
enabled.
The  Live Update 3™ is a tool used to detect and update your BIOS/
drivers/VGA BIOS/VGA Driver/Utility online so that you don’t need to
search for the correct BIOS/driver version throughout the whole
Web site. To use the function, you need to install the “MSI Live
Update 3” application.  After the installation, the “MSI Live Update 3”
icon (as shown on the right) will appear...

4-10MS-7210 Micro-ATX MainboardMEGA STICK
In the MEGA STICK sub-menu, you can configure the settings of MSI MEGA STICK
and the media files (*.m3u, *.mp3, *.wav, *.cda, *.wma) on your system.
Basic Function
Here you can edit your own play list with the buttons “load”, “save”, “delete”,
“shuttle”, “repeat” & “print”.
LoadTo load media files or the playlist of mp3 files (*.m3u) on your system or
on your MEGA STICK.
SaveTo save a loaded playlist of mp3 files (*.m3u) on your system or on
your MEGA STICK....

Introduction to DigiCell4-11There is also a toolbar for you to execute some basic function, like play, stop, pause,
previous/next song, song info and volume adjust. There is also a scroll bar on the top
for you to forward/rewind.
Right-click on the MP3 file and choose “Info”, a MP3 Info dialogue
will pop up to show the information of the file, including the title, artist,
album, release year and others. You may also add your own comment
in the comment field. Then click “Save” to save the change, click...

4-12MS-7210 Micro-ATX Mainboard
Non-Unicode programs supported
If you are using an operating system in European languages, and you’d like to play the
media files in MEGA STICK with East-Asian languages (such as Chinese, Japanese...
etc.), it is possible that the file names display incorrectly.
However, you can install the Supplemental Language Support provided by
Microsoft to solve this problem. You need to have your Microsoft Setup CD prepared
in the CD-ROM. The system will start to install the...

Introduction to DigiCell4-133. Then go to the [Advanced] tab and select the language you want to be
supported (the language of the filename in the MegaStick) from the drop-
down list in the [Language for non-Unicode programs], then click [Apply]. The
system will install the necessary components from your Microsoft Setup CD
immediately. 

4-14MS-7210 Micro-ATX MainboardV-Center
Click on the V-Center icon in the main menu and the V-Center program will be
enabled.
V-Center is just like your PC doctor that can detect, view the CPU & system tempera-
ture and Vcore voltage.Stable - Click on this icon, it will automatic configure the stable values for the system.
Normal - Click on this icon, it will automatic get the original values for the system. 

Introduction to DigiCell4-15Power on Agent
In the Power on Agent sub-menu, you can configure setting of power-on, power-
off and restarting status.
In the screen below, you can set the date, time, start-up programs respectively for
power-on, power-off and restarting.
Power On
Here are the available settings for Power On function:
DateUse the drop-down list to select the date for power-on.
TimeUse the arrow keys to select the hour/minute/second for power-on,
power-off and restarting. Then click “Apply” to...