MSI 915p Combo 2 Manual

 
7 Floppy Disk Drive Connector: FDD1 
The mainboard provides a standard floppy disk drive connector that 
supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.   
 IDE Connectors: IDE1 
The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 66/100 controller that 
provides PIO mode 0~4, Bus Master, and Ultra DMA 66/100 function. You can connect 
up to two hard disk drives, CD-ROM, 120MB Floppy and other devices. 
The first hard drive should always be connected to IDE1. IDE1 can connect a...

 
8 MSI Reminds You...  Always consult the vendors for proper CPU cooling fan.  Serial Port Connector: JCOM1 
The mainboard provides one serial port header for you to 
connect secondary serial devices. 
 
 
 Front Panel Connectors: JFP1/JFP2 
The mainboard provides two front panel connectors for 
electrical connection to the front panel switches and LEDs. 
JFP1 is compliant with Intel Front Panel I/O Connectivity 
Design Guide.  
  
 
 Front Panel Audio Connector: JAUD1 
The front panel audio connector...

 
9 Clear CMOS Jumper: JBAT1 
There is a CMOS RAM on board that has a power supply from external battery to keep the data 
of system configuration. With the CMOS RAM, the system can automatically boot OS every time 
it is turned on. If you want to clear the system configuration, 
use the JBAT1 (Clear CMOS Jumper) to clear data. Follow 
the instructions in the image to clear the data. MSI Reminds You...  You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position. Avoid...

 
10  BIOS Setup 
Power on the computer and the system will start POST (Power On Self Test) process. When the 
message below appears on the screen, press  key to enter Setup. 
Press DEL to enter Setup  
If the message disappears before you respond and you still wish to enter Setup, restart the 
system by turning it OFF and On or pressing the RESET button. You may also restart the system 
by simultaneously pressing , , and  keys. Main Page 
 
Standard CMOS Features 
Use this menu for basic system...

 
11  Load BIOS Defaults 
Use this menu to load the optimized default settings into the BIOS for the best system 
performance operations. 
 
Set Password 
Use this menu to set the password. 
 
Save & Exit Setup 
Save changes to CMOS and exit setup. 
 
Exit Without Saving 
Abandon all changes and exit setup. 
 
 
 Frequency/Voltage Control 
 
Adjust CPU Ratio 
This item allows you to adjust the CPU ratio. If the CPU is locked, you will not be able to adjust 
the CPU Ratio. 
 
Auto Detect PCI Clk 
This...

 
12  CPU Clock 
This item allows you to select the CPU Front Side Bus clock frequency (in MHz) and overclock 
the processor by adjusting the FSB clock to a higher frequency. Setting options:  
For CPU   FSB200: [200]~[235] 
For CPU   FSB133: [133]~[165] 
 
 
 
 Load BIOS Default 
You can load the BIOS default values provided by the mainboard manufacturer for the stable 
performance. 
 
 
 
 
 
 
 
 
  

 
13 Introduction 
Félicitations, vous venez d’acquérir une carte mère ATX 915P/G Combo2 (MS-7140 v2.X) Series. 
Les 915P/G Combo2 Series sont basées sur les chipsets Intel Intel 915P/PL & Intel ICH6 offrant 
un système très performant. La carte fonctionne avec les processeurs Intel®
 P4 Prescott 533/ 
800MHz (LGA775), les 915P/G Combo2 Series est très performante et offre une solution 
adaptée tant aux professionnels qu’aux particuliers. 
 Schéma 
 DIMM1
DIMM3
DIMM2
DIMM4T: mouse 
B: keyboard
T:...

 
14 Spécificités 
CPU 
l Supporte les processeurs Intel Pentium 4 Prescott LGA775 pour LGA775. 
l Supporte jusqu’à Pentium 4 3XX, 5XX, 6XX (EM64T) ou supérieur. 
l Supporte la technologie Intel Hyper-Threading. 
l Supporte la technologie Intel EIST. 
(Pour les dernières mises à jours concernant les CPU, vous pouvez visiter : 
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support.php.) 
 
Chipset 
l Chipset Intel 915P/G 
  - Supporte FSB 533/ 800MHz  
  - Supporte l’interface PCI...

 
15  Périphériques Intégrés 
l Périphériques Intégrés Inclus : 
- 1 port floppy supportant 2 FDD avec 360K, 720K, 1.2M, 1.44M et 2.88Mbytes. 
- 2 ports série (Arrière * 1/ Avant * 1), 1 port parallèle supportant les modes SPP/EPP/ECP. 
- 8 ports USB 2.0 (Arrière * 4, avant * 4). 
- 3 ports audio (Line-In/Line-Out/Mic). 
- 1 RJ-45 LAN Jack. 
 
Audio 
l Contrôleur AC97 link intégré dans le Chipset Intel ICH6. 
l 6 canaux audio – codec ADI 1888. 
  - Compatible avec les spec AC97 v2.3. 
  - Répond aux...

 
16 Panneau Arrière 
Le panneau arrière procure les connecteurs suivants: 
 Installation Matériel 
Ce chapitre vous indique comment installer le processeur, barrettes de mémoire et cartes 
d’extension. Lors de l’installation des matériels, veuillez suivre les instructions de montage pour 
éviter d’endommager quoi que ce soit. 
 Central Processing Unit: CPU 
La carte supporte les processeurs Intel Pentium 4 Prescott. Elle utilise le socket CPU LGA775. 
Assurez-vous que vous possédez bien un ventilateur +...