Mountfield Lawn Mower 71503705 1 Hp470 And Sp470 Operating Instructions

Please Read These Instructions
Before Using Your Mower
Call our Helpline if you have any problems:
Helpline Number
0870 240 2114
Operating Instructions
for model
HP470 & SP470 Lawnmowers
with Briggs & Stratton engine
Product Codes:
299164623/BQ
297264623/BQ 

Thank you for purchasing a Mountfield lawnmower. This machine will give you many years os safe and reliable service if
operated in accordance with these instructions. Please read and understand these Operating instructions before using
your mower, failure to do so could result in personal injury or damage to the equipment.
NEVER TIP THE MOWER ON ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL.
To access the underside, lift the front wheels by lowering the handle unitl it rests on the ground....

14) Start the engine carefully, following the instructions and keeping feet well away from the blade. 
15) Do not tilt the lawnmower when starting the engine. Start the engine on a flat surface that is free of obstacles and tall grass.
16) Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
17) Never pick up or carry a lawnmower while the engine is running.
18) Stop the engine and disconnect the spark plug wire:
– Before carrying out any work...

HOW TO GET MOWING
YourMountfield lawnmower does not contain petrol or oil and these must be added before use. Running the mower with
insufficient oil can cause serious damage to the engine and will invalidate your warranty.
NEVER TIP THE MOWER ON ITS SIDE AS THIS WILL FLOOD THE AIR FILTER WITH OIL.
To access the underside, lift thefront wheels by lowering the handle unitl it rests on the ground.
Carefully remove the mower from the carton and read these Operating Instructions. An Owners Manual for the...

The blade brake is controlled by the lever (1), which
should be held against the handle when starting and using the
lawnmower. The engine stops when the lever is released.
In the power-driven models, pull the lever (1) towards the
handle for forward movement. The lawn-mower stops moving
forward when the lever is released.
The cutting height is adjusted using the levers (1). 
The four wheels must be at the same height. 
MAKE THIS ADJUSTMENT ONLY WHEN THE BLADE HAS
STOPPED MOVING.
2.3
2.2
2.1
2....

Lift the stone-guard and attach the grass-catcher (1) cor-
rectly as shown in the drawing.
To start the engine, follow the instructions in the engine
booklet and then pull the blade brake lever (1) towards the han-
dle and give a sharp pull on the starter cable knob (2). 
The lawn will look better if it is always cut to the same
height and in alternate directions.
When you have finishing mowing, release the brake lever
(1) and disconnect the spark plug cap (2).  
WAIT FOR THE BLADE TO STOP before...

All operations on the blade should be carried out at a
specialized centre.
Note for specialized centres:Reassemble the blade (2) as
shown in the drawing and tighten the central screw (1) using a
torque wrench set to 50-60 Nm.
In the power-driven models, regulate the adjuster (1) so
that the wire (2) is slightly loose, with the lever (3) at rest.
4.2
4.1
IMPORTANT – Regular, careful maintenance is essential for keeping the safety level and original performance of the
machine unchanged in time.
Store the...

Guarantee
GGP UK Limited undertakes to provide a full guarantee against defective materials or
workmanship for two years from the date of purchase.
If the machine is used for commercial purposes; i.e. for hire; or by contractors, caravan
sites or similar users, this guarantee period shall be 90 days.
If any part is found to be defective within the guarantee period, GGP UK Limited via their
authorised dealer, will effect the repair or replacement at no charge to the owner providing
that the fault is...