Motorola T722i Manual

							 
19
Getting Started
Notes: 

Do not use tools to remove a flip cover. Using tools to 
remove a flip cover will damage the cosmetic 
appearance of the phone.
The flip cover is attached tightly to the phone, and 
considerable force is required to remove it.
Attach a Flip Cover
Attaching the Camera
Insert the optional 
Motorola Original™ 
Digital Camera into the 
accessory connector port 
at the bottom of your phone as 
shown.
For instructions on how to take 
and send photos, see page 45.
Action
Insert the tabs at the 
bottom of the cover into 
the slots at the base of 
the phone, then push the 
cover down and snap it 
into place. 
						

							 
20
Getting Started
Turning Your Phone On
Adjusting 
Vo l u m e
Press the up and down 
volume keys to:
increase and decrease earpiece volume during a call
increase and decrease the ringer volume setting when 
the idle display is visible (flip must be open)
Action
1
Open your phone
2Press and hold P to 
turn on the phone
3If necessary, enter your SIM card PIN code and 
press 
OK(+) to unlock the SIM card
Caution: If you enter an incorrect PIN code 3 
times in a row, your SIM card is disabled and 
your phone displays 
SIM Blocked.
4If necessary, enter your 4-digit unlock code and 
press 
OK(+) to unlock the phone
The unlock code is originally set to 1234. Your 
service provider may change this number before 
you receive your phone.
Power
key
Vo lu m e
keys 
						

							 
21
Getting Started
Tip: At the lowest volume setting, press the down 
volume key once to switch to vibrate alert. Press it 
again to switch to silent alert. Press the up volume 
key to cycle back to vibrate alert, then ring alert.
turn off an incoming call alert
Making a Call
Note: You must dial the phone number from the idle 
display. See page 23.
Answering a Call
When you receive a call, your phone rings and/or vibrates 
and displays an incoming call message.
PressTo
1
keypad keys dial the phone number
Tip: If you make a mistake, 
press 
DELETE(-) to delete the 
last digit, or press and hold 
DELETE(-) to clear all digits.
2N make the call
3O end the call and “hang up” the 
phone when you are finished
PressTo
1
N or ANSWER(+)answer the call
2O end the call and “hang up” the 
phone when you are finished 
						

							 
22
Getting Started
Tip: When the phone flip is active, simply open the phone 
to answer the call. (To activate, press 
M >Settings 
>
In-Call Setup >Answer Options >Open to Answer)
Note: If the phone is locked, you must unlock it to 
answer the call.
Changing the 
Call Alert
With the phone flip open, 
press the down volume 
key to switch the alert for 
incoming calls and other events to vibrate alert, then silent 
alert. Press the up volume key to reset ring alert.
Viewing Your Phone Number
To view your phone number from the idle display, press 
M#.
While you are on a call, press 
M >My Tel. Numbers.
Note: Your phone number must be stored on your SIM 
card to use this feature. To store your phone number on 
the SIM card, see page 49. If you do not know your phone 
number, contact your service provider.
Vo lu m e
keys 
						

							 
23
Learning to Use Your Phone
Learning to Use Your 
Phone
See page 1 for a basic phone diagram.
Using the Display
The idle display (shown below) is the standard display 
you see when you are not on a call or using the menu. 
You must be in the idle display to dial a phone number.
The 
e (menu) indicator in the bottom center of the display 
indicates you can press the menu key (
M) to go to the main 
menu to see more features.
Service Provider10/15/03 
BROWSERSTYLESe
)8?
IP VQ 5^
Clock
Menu Indicator Left Soft Key
Label
Date
Right Soft Key 
Label 
						

							 
24
Learning to Use Your Phone
Labels at the bottom corners of the display show the 
current soft key functions. Press the left soft key (
-) or 
right soft key (
+) to perform the function indicated by the 
left or right soft key label.
At the top of the display are a number of status indicators:
➊ Signal Strength Indicator  Vertical bars show the 
strength of the network connection. You cannot make or 
receive calls when the 
0 (no signal) indicator is displayed.
➋ GPRS Indicator  Shows that your phone is 
using a high-speed GPRS network connection. 
Other indicators can include:
(= GPRS PDP 
context active*= GPRS packet 
data available
Service Provider10/15/03 
BROWSERSTYLESe
)
8?
IPV Q
5^
➋GPRS 
Indicator
➊Signal 
Strength 
Indicator
➏Text Entry 
Mode 
Indicator
➒Message 
Waiting 
Indicator
➐Battery 
Level 
Indicator
➌In Use 
Indicator➍Roam 
Indicator➎Active Line 
Indicator
➑Ring Style 
Indicator 
						

							 
25
Learning to Use Your Phone
➌ In Use Indicator  Shows that a call is in progress. Other 
indicators can include:
➍ Roam Indicator  Shows that your phone 
is seeking or using another network system 
outside your home network. On text entry 
screens, shows text entry status information:
➎ Active Line Indicator  Shows the current 
active phone line:
➏ Text Entry Mode Indicator  Appears when 
you are in a text entry screen, to show the 
current active text entry mode:
➐ Battery Level Indicator  Vertical bars show the battery 
charge level. Recharge the battery when you see 
Low Battery and hear the low battery alert.
6= secure CSD 
call7= unsecure CSD 
call
9= secure packet 
data transfer:= unsecure packet 
data transfer
;= secure 
application 
connection
						

							 
26
Learning to Use Your Phone
➑ Ring Style Indicator  Shows the ring style setting.
➒ Message Waiting Indicator  Appears 
when you receive a text or email message. 
Other indicators can include:
Using the 
4-Way 
Navigation Key
Use the 4-way navigation 
key (
S) like a joystick to navigate the menu system, 
change feature settings, and play games.
Tip: Down and up are your primary movements within 
menus. Move left and right to change feature settings, 
navigate the datebook, and edit text.
V= loud ringW= soft ring
Z=vibrateX= vibrate and ring
Y= silent
R= voicemail 
messageS= voicemail and 
text message
T= active chat 
sessionU= limited character 
count (text entry 
screen)
4-way
navigation
key 
						

							 
27
Learning to Use Your Phone
From the idle display, press S to temporarily show 4 
menu feature icons:
You can press 
S left, right, up, or down to select one of 
the menu feature icons when they are visible in the idle 
display. After five seconds, the menu feature icons 
disappear to give a better view of the wallpaper image.
Service Provider10/15/03 
BROWSERSTYLESe
)8?I P VQ 5^
U
rA zMessages
PhonebookPicture Msgs Recent Calls 
						

							 
28
Learning to Use Your Phone
Using Menus
From the idle display, press M to go to the main menu.
Press 
S to highlight a menu feature icon in the main 
menu. Select 
More (>) to see additional menu features. 
The following icons represent features that may appear in 
EXITSELECT
Main Menu
Media Center
Current 
selection.
End Key
Exit menu
without making
changes.
Left Soft Key
Perform left
function.
Menu Key
Enter menu
system, or open
a sub-menu.
4-Way 
Navigation Key
Scroll up, down, left, or right.
Right Soft Key
Perform right 
function.