Motorola Sd7500 Manual

							
 
 
1 
 
SD7504 User Guide 1 
Welcome  Congratulations on your purchase of a Motorola SD7504 Series wireless camera. 
Check the contents listing on  the product packaging to ensure that your purchase 
includes each of the items listed. 
 
Product registration is an important step toward enjoying your new Motorola 
product. Registering helps us facilitate wa rranty service, and permits us to contact 
you should your Motorola product require an update or other service. Registration 
is not required for warranty coverage. 
To register your product online, visit: 
http://broadbandregis tration.motorola.com 
Product registration is not available in Canada. 
Please retain your original dated sales  receipt for your records. For warranty 
service of your Motorola product, you w ill need to provide a copy of your dated 
sales receipt to confirm warranty status. 
  
						

							
 
 
2 SD7504 User Guide 2  Camera Overview
 
1.  Camera lens 
2.   Speaker 
3.   Microphone 
4.   Light sensor 
5.   Page/registration button 
6.   In use/page/registration indicator 
 
 
  
						

							
 
 
3 
 
SD7504 User Guide 3 
How to Use this Guide It is necessary to use a color or black and white handset to receive images and 
sound from your camera. This guide makes use of two fonts to distinguish 
between the 
FUNCTIONS
 and 
FEATURES/OPTIONS
 associated with the handsets and 
some base units. 
• 
FUNCTION
 keys are found on the handset and some base units. These 
keys allow you to perform act ions such as placing calls (
ON/FLASH
), 
ending calls (
OFF/CANCEL
), and connecting to (
CONNECT TO
) different 
devices. 
•  
FEATURES/OPTIONS
 are only visible on the display and allow you to access 
menus such as Ringer
, Alarm Clock
, and 
Phonebook
. When you see the 
FEATURES/OPTIONS
 font in this guide, use the softkeys to access the feature 
menu and to see t he available options. 
 
The left and right softkeys are located above the 
REDIAL
 and 
DELETE
 keys on the handset and some 
base units. Use the softkeys to select features and 
options that appear on the display directly above the 
corresponding softkeys. 
ON OFF
Left
soft key Right
soft key 
						

							
 
 
4 SD7504 User Guide 4 
 
Getting Started Battery Safety Instructions •  Do not burn, disassemble, mutilate, or puncture the battery. The battery 
contains toxic materials that could be released, resulting in injury and/or 
explosion.  
•   CAUTION:  There is a risk of explosion if you replace the battery with an 
incorrect battery type. Use only the battery that came with your phone or an 
authorized replacement recommended by the manufacturer. 
•   Keep batteries out of the reach of children.  
•   Remove batteries if storing over 30 days. 
•   The rechargeable batteries that power this product must be disposed of 
properly and may need to be recycled. Refer to your battery’s label for battery 
type. Contact your local recycling center for proper disposal methods.  
						

							
 
 
5 
 
SD7504 User Guide 5 
Installing the Camera Battery
 
1.
  Remove any stickers or inserts, if present. 
2.   Remove the battery door by pressing 
down on the indentation and sliding 
upward. 
3.   Plug the battery connector into the 
receptacle. (Make sure the black wire is 
on the right.) 
4.   Insert the battery into the battery 
compartment. 
5.   Replace the battery door. 
 
 
Black
Red 
						

							
 
 
6 SD7504 User Guide 6  Selecting a Location for Your Camera 
After the camera battery is fully charged, you can disconnect the power cord and 
place the camera in any room you wish to monitor.  
						

							
 
 
7 
 
SD7504 User Guide 7 
Charging the Camera Battery 
1.
  Insert the power cord into the back of the camera base. 
2.   Plug the power cord into an electrical outlet.  
3.   Place the base on a sturdy surface. 
 NOTES:   
•   The initial battery charge ti me is 10–12 hours.  
•   A fully charged battery prov ides approximately three 
hours of viewing of time, or four hours of audio, and 
has approximately five days standby.   
						

							
 
 
8 SD7504 User Guide 8  Camera Indicators 
The LED on your wireless camera changes to indicate different actions. The table 
below details each change.  LED Description Green (flashing quickly) 
The camera is not registered  Green (solid) The camera is registered and charging, but not 
in use Red (flashing quickly) The camera is in the registration process Red (slow flash) The camera is being paged Red (solid) The camera is in use  
						

							
 
 
9 
 
SD7504 User Guide 9 
Registering Your New Camera Before you can use your new wireless camera, you must register it to your base 
unit. SD7500 Series base units allow you to register up to 12 devices (e.g., 
handsets, cameras, cell docks), and use up to four devices at one time.  
 To register a new camera: 1.   Ensure that your camera is plugged into an electrical outlet. 
2.   Press and hold the 
PAGE
 button on the camera. Release the button after 
approximately four seconds or until t he LED turns red and flashes quickly. 
3.   Press and hold the base unit’s 
PAGE
 button. Release the button after 
approximately four seconds, or until the base unit’s 
IN USE
 LED flashes.
 
When the registration is complete, the camera’s LED is solid green. 
   
						

							
 
 
10 
SD7504 User Guide 
10 
Using Your New Camera All SD7500 Series handsets are compatible with your new camera. You can use 
the black and white or color handsets to  monitor a room. Only the color handsets 
offer both audio and visual monitoring.  
 NOTES:  
•   All monitoring sessions automatically set to 
MUTE
 and in speakerphone mode . To turn 
the speakerphone off, press the handset’s  SPKRPHONE button.  
•   Use the handset’s volume control buttons  to increase or decrease the sound. 
•   Only one handset at a time can connect to a camera.