Motorola Qip2500 3 User Manual

 QIP2500 User Guide 
 
15 
CONNECTING YOUR QIP2500  
 
Stereo Cabling (VCR to Stereo) 
This diagram shows how to connect the set-top to a stereo using the 
audio connectors on the VCR. The VCR sound is played through the 
stereo.  
When connecting the video path, never connect baseband composite 
video and S-Video at the same time. Some entertainment equipment will 
not support both video inputs simultaneously.  

  
 
16
 
CONNECTING YOUR QIP2500  
 
Stereo Cabling (TV to Stereo) 
This diagram shows how to connect the TV so that its sound plays 
through the stereo. 
When connecting the video path, never connect baseband composite 
video and S-Video at the same time. Some entertainment equipment will 
not support both video inputs simultaneously.   

 QIP2500 User Guide 
 
17 
CONNECTING YOUR QIP2500 
 
 
Baseband Cabling  
This diagram shows baseband audio and video connections to a Dolby® 
Digital receiver. This setup lets you record on the VCR and play back 
with sound through the Dolby Digital receiver, but this setup does not 
support surround sound. To play back Dolby Digital 5.1 surround sound 
through the Dolby Digital receiver, see “Dolby Digital Cabling.”  
NOTE 
In this diagram, the baseband  connectors on the entertainment 
components...

  
 
18
 
CONNECTING YOUR QIP2500 
 
 
Dolby Digital Cabling  
This diagram shows audio and video connections to a Dolby Digital 
receiver. This setup lets you record on the VCR and play back with 
sound through the Dolby Digital receiver.  
To play back Dolby Digital 5.1 surround sound through the Dolby Digital 
receiver, you must connect the set-top to the receiver using the 
DIGITAL 
AUDIO COAX
 or DIGITAL AUDIO OPTICAL connections. The audio R and L 
connectors do not carry Dolby Digital 5.1. 
NOTE...

 QIP2500 User Guide 
 
19 
TROUBLESHOOTING 
Problem Possible Solution 
The set-top will 
not power on  Reconnect the power cord. Be sure the QIP2500 is 
plugged into an outlet that is always live. 
The set-top may have received a software update and 
may not power on while the new software is being 
installed. Try again in a few minutes. 
Verify that the AC power cord is connected to the set-top 
and an AC outlet. Unplug the set-top from the AC outlet, 
plug it back in, and then press the 
POWER button....

  
 
20
 
There is no 
audio from the 
center and/or 
surround 
speakers of a 
home theater/ 
digital receiver 
connected to 
the set-top 
Not all Dolby Digital
® programs feature full 5:1 surround 
sound. In some cases, the programs may only contain left 
and right stereo audio. 
Verify that the SPDIF cable (round coaxial connector or 
square optical connector) is firmly connected to the set-
top and the home theater receiver. 
Verify that the home theater re ceiver is set to a surround 
sound audio...

 QIP2500 User Guide 
 
21 
There is no 
video on the TV 
screen 
Verify that the TV is powered on and set to the 
appropriate input source for the set-top. 
Verify that the set-top is powered on and tuned to an 
authorized digital TV channel. 
Verify that all video cables between the set-top and 
the TV are firmly connected (hand tighten if necessary). 
Verify that the coaxial cable feed is firmly connected to the 
set-top and the wall jack. 
If the set-top video output 
is connected to a home...

MGBI 522267-001
5/05 V
isit our website at:
www .motorola.com