Motorola Qip 7100 2 User Guide

  
 
11 
4 ON-SCREEN GRAPHICS 
Your QIP receiver can generate graphics that overlay the video programming or fill 
the entire television screen. Common examples include on-screen menus (such as 
the User Setting menu), closed captions, and interactive program guides. The QIP 
receiver overlays these graphics whenever you open a menu, enable closed 
captions, or scroll through a program grid. 
•  On-screen graphics are not available on all video output combinations. 
•   On-screen graphics will not be...

  
 
13 
5 CONNECTING YOUR QIP RECEIVER 
Instructions and diagrams are included for the following connections: 
•  High-Definition Television  (HDTV) 
•   A/V receiver — Audio 
•   Stereo TV  (SDTV) 
•   Stereo TV (SDTV) and Stereo VCR 
•   A/V receiver, TV, and VCR   
Before you move or change components on your entertainment system, review the 
following:  
•   For basic cable connections, use 75-ohm coaxial cables equipped with F-type 
connectors.  
•   Disconnect power from your equipment before...

  
5 CONNECTING YOUR QIP RECEIVER 14
 
Video Connection Options 
The QIP receiver offers several different video connection options. Component 
video, HDMI, and IEEE-1394 allow you to view both High-Definition and Standard-
Definition TV programming. Composite video, S-Video, and RF coaxial connections 
allow you to view only Standard-Definition TV programming. See  Section 4 
Connections  for visual connection options. 
To determine whether your TV features component video, HDMI, IEEE-1394, 
S-Video,...

  
5 CONNECTING YOUR QIP RECEIVER 
 15
 
Connecting Your QIP Receiver to an HDTV — Video Only 
IR RemoteInput CableCARD
USB
Ethernet
SWITCHED105-125 V 60 Hz
4 A MAX
500 W MAX
Serial Optical
AudioDigital
Audio
S-Video
1394
Firewire
HDMI
RF TV OUT
FiOS TV IN Audio
Left
Audio Right
Video
Out Y
Pb
Pr
CABLE/
ANTENNA INIEEE 1394
COMPONENT VIDEO INPUT
Y
Pb
Pr
HDMI
Either / or
HDMI
connection
Component video
connection IEEE 1394
connection
Coax Cable in
QIP7100
HDTV
  
Note: Only (1) HDTV video connection needs...

  
5 CONNECTING YOUR QIP RECEIVER 16
 
Connecting HDTV — Video  
Cable In Connect an RF coaxial cable to the cable wall outlet and the 
CABLE IN connector on 
the QIP receiver. 
Component Video (YPbPr)  Connect the component video cables to the  Y, Pb , and  Pr connectors on your HDTV 
and QIP receiver. 
This connection supports only the high-definition video connection between the QIP 
receiver and the HDTV. To connect the audio connections for your HDTV, proceed to 
the following page. To connect your...

  
5 CONNECTING YOUR QIP RECEIVER 
 17
 
Connecting Your QIP Receiver to an HDTV — Audio 
IR RemoteInput CableCARD
USB
Ethernet
SWITCHED105-125 V 60 Hz
4 A MAX
500 W MAX
Serial Optical
AudioDigital
Audio
S-Video
1394
Firewire
HDMI
RF TV OUT
FiOS TV IN Audio
Left
Audio Right
Video
Out Y
Pb
Pr
either / or
L/R audio
connection Digital audio
optical connection Digital audio
coaxial connection
Coax Cable in
 
Note: Only (1) audio connection needs to be made to an HDTV. 
Connecting HDTV — Audio 
Note: These...

  
5 CONNECTING YOUR QIP RECEIVER 18
 
If your TV supports a digital audio input: 
•  If your equipment supports it, use the digital audio 
OPTICAL S/PDIF or COAXIAL 
S/PDIF
 outputs instead of the AUDIO L and R outputs. In most cases, S/PDIF 
offers better audio quality, including support for Dolby® Digital 5.1 audio. 
For information on configuring your QIP receiver settings, see 
Optimizing Your QIP 
Receiver for High-Definition TV .  

  
5 CONNECTING YOUR QIP RECEIVER 
 19
 
Connecting Your QIP Receiver to an A/V Receiver — Audio  
DIGITAL AUDIOTV/MONITOR OUTPUT SPEAKER
CONNECTORS
COAXIALCENTER
SUB-
WOOFER
SURROUND
FRONT
VIDEO S-VIDEO
L
DVD
CABLE/TV
VIDEO 2
IN
OUT
VCR AUDIO VIDEO
R VIDEO S-VIDEO
OPTICAL
5.1 CH INPUTL
R
A/V Receiver QIP7100
IR Remote
Input CableCARD
USB
Ethernet
SWITCHED105-125 V 60 Hz
4 A MAX
500 W MAX
Serial Optical
AudioDigital
Audio
S-Video
1394
Firewire
HDMI
RF TV OUT
FiOS TV IN Audio
Left
Audio Right
Video
Out...

  
5 CONNECTING YOUR QIP RECEIVER 20
 
•  Stereo audio  — Connect the stereo audio cable to the AUDIO L and R 
connectors on the QIP receiver and the AUDIO LEFT and AUDIO RIGHT 
connectors on the A/V receiver. 
•   HDMI  — Connect an HDMI cable to your A/V receiver and to the HDMI 
connector on your QIP receiver. 
For information on configuring your QIP receiver settings, see 
Optimizing Your QIP 
Receiver for High-Definition TV .