Motorola Md7161-2 Owners Manual

 
  
MD7161 User Guide  
45 
 
Message Window Display  
WINDOW DISPLAYS 
TO INDICATE: 
0  No messages in any mailbox 0-99  
    F  Memory is full or the tota
l number of messages is 
99 
Counting 1 to 99  Duration of announcement or memo recording  (maximum length of announcement is 90 seconds) 99 (flashing)  New message nu mber during message playback 1-8 (steady for one 
second) Indicates volume level selected when 
VOL+ or 
VOL–   is pressed 40-99  Current remote access code while setting A...

 
 
MD7161 User Guide 
 46   
Remote Access You can use many features of the answer ing system remotely from a touch-tone 
phone. 
1.   Dial your telephone number. 
2.   When the system answers, enter your remote access code (preset to 50). The 
system beeps once and announces the  number of new messages on the system. 
3.   Enter a remote command (see Remote Access Commands). 
4.   Press  *0 to exit remote operation.  Remote Voice Menu Access The system has voice prompts to help you with remote...

 
  
MD7161 User Guide  
47 
 
REMOTE ACCESS COMMANDS
 
 FUNCTION 
COMMAND 
Play messages in a mailbox  Press  #, then the desired mailbox number (1, 2, 3). The system plays 
new messages. If there are no new messages, the system plays old 
messages. Repeat a message  Press  #4 while message is playing; press  #4 twice to replay previous 
message. Skip a message  Press  #6 while message is playing; each press advances to next 
message. Stop 
Play menu options  Press
 #5. Save messages  Hang up. Delete...

 
 
MD7161 User Guide 
 48   
 NOTE:  If no key is pressed within 10 seconds of entering remote access, the voice 
menu will be announced. After the voice menu announcement, if no key is pressed 
within 20 seconds, the remote  access call will automatically end.  

 
  
MD7161 User Guide  
49 
 
Special Features  If you have at least two ha ndsets registered to your base unit, you can use the 
intercom and call transferring fe atures. Each handset is named 
HANDSETX
. The X 
represents the order (1, 2, 3, 4) in which  the handset was registered to the base unit. 
(See the user guide for the expansion handset for more information.)  
 
Intercom Calls When not on a call, 
1.   Press the 
INT
 key on any handset. 
ENTER HANDSET #
 appears on the display. 
2.   Enter...

 
 
MD7161 User Guide 
 50   
Call Transfer During an outside call, you can transfer  the call from one handset to another.  
1.   Press the  
INT
 key on the handset with the outside call. 
ENTER HANDSET #
 is 
displayed.  
2.   Enter the number of the handset to which you wish to forward the call. CALL 
FORWARDED
  appears on the screen. 
3.   To answer the call, press the 
ON/FLASH
 button on the second handset.  
 NOTE : If the second handset does not respond after approximately 60 seconds, the...

 
  
MD7161 User Guide  
51 
 
Conference Call  Use the conference feature to enable two or more handsets to participate in the same 
outside call. 
1.   While the first handset is on an outs ide call, the second handset can press 
ON/FLASH
 or 
v
.  
2.   A timer (e.g., CONF. 00:01:25
) appears on the displays of both handsets showing the 
length of the call.    

 
 
MD7161 User Guide 
 52   
In Case of Difficulty The suggestions below should solve most problems you might encounter while using 
your phone. If you still have difficulty after trying these suggestions, visit us on the 
web at www.motorola.com/cordless. 
 
The phone doesn't work at all 
•  Make sure the power cord is plugged firmly into the base unit and an electrical 
outlet. 
•   Make sure the phone cord is plugged firmly into the base unit and the telephone 
wall jack. 
•   Make sure the...

 
  
MD7161 User Guide  
53 
 
You get noise, static, or a weak signal when you're away from the base unit 
•   You may be out of range. Either move closer to the base unit, or relocate it. 
•   The layout of your home may be limiting  the range. Try moving the base unit to 
another position. (See Installing the Base Unit on page 7.) 
 
You get noise, static, or a weak signal even when you're near the base unit 
•   Household appliances plugged into the same circuit as the base unit can...

 
 
MD7161 User Guide 
 54    You hear other calls while using your phone 
•
  Disconnect your base unit from the te lephone jack, and plug in a different 
telephone. If you still hear other calls,  contact your local telephone company. 
 
Common Troubleshooting Steps for Your Cordless Phone 
If the handset or base unit does not seem to be responding normally, then try putting 
the handset in its base. If it does not seem to respond, do the following (in the order 
listed): 
 
1.   Disconnect the power...