Motorola I35s User Guide

123
Settings
Phone Setup
Phone Setup sets some basic phone features. Access Phone Setup to set the
following options:
Line—enables you to choose Line 1 or Line 2 as the active line for
outgoing calls
AutoAns—sets your phone to automatically answer an incoming call
after a specified number of rings; when this feature is turned on, the phone
answers by connecting you to the caller; it does not send the call to Voice
Mail, unless you are out of coverage or on another call
Any Key—when turned on, enables...

124
nextel.com
Security
Security allows you to set security features:
Phone Lock—sets an optional code that locks your phone
Keypad Lock—displays instructions for locking and unlocking your
phone’skeypad
SIM PIN—enables and disables your phone’s SIM PIN security feature
New Passwords—enables you to change your phone’s unlock code,
security code, and SIM PIN
Master Reset—allows Nextel Customer Care to reset your service in the
event of a provisioning problem
Using Phone Lock
The Phone Lock feature...

125
Settings
Unlock Code—this code is used to control access to the phone using
Phone Lock; to access the Master Clear and Feature Reset features. If you
want to use any of these features, contact Nextel Customer Care for
assistance.
Security Code—this code is used to access the Master Reset feature
under the direction of a Nextel Customer Care Representative; or to
override your Unlock code under the direction of a Nextel Customer Care
Representative.
SIM PIN—this code is used to access the...

126
nextel.com
Feature Reset—returns all settings to their original defaults; use only
under the direction of a Nextel Customer Care Representative
Baud Rate—sets the baud rate at which your phone communicates when
connected to a laptop computer, PC, or similar device
TTY Setup—sets TTY options. By default, your phone is set to function
with a TTY device
TTY Baud Rate—sets the baud rate at which your phone communicates
when connected to a TTY device
Alert Timeout—controls the amount of time the Call...

127
Settings
SettingAutoRedial
When Auto Redial is set toOn, if you receive aSystem Busy, Try Later
message while making a call, the phone will redial the number automatically.
You will hear a ring-back tone when a successful call is placed.
When Auto Redial is set toOff, you must press and hold
sto redial the last
number dialed.
Setting Backlight Timer
The backlight illuminates the display and keypad when you receive or make
calls or use the phone in poor lighting conditions. You can set the amount of...

128
nextel.com NOTE: Setting the backlight to stay on continuously will decrease the
amount of time you can use the phone before recharging the
battery.
Setting Photo Sensor
To conserve battery power, the photosensor will disable the backlight when you
are in good lighting conditions. To force the backlight to come on every time a
key is pressed, turn the photosensor off.
NOTE: Turning the Photosensor to OFF will force the backlight to come
on every time a key is pressed and will drain your battery...

129
Settings
Wrap Around—when you reach the bottom or top of a list or menu
scrolling“wraps”around and continues at the other end of the list or menu;
this is the default setting
You can set the scrolling style from theInitial Setupscreen using theScroll
option.
Changing Display Language
You can customize thei35sPhone to display menus in English, French,
Spanish, or Portuguese. The default language is English.
To change the display language:
Master Clear
Master Clear returns all your phone’s settings to...

130
nextel.com
Your phone supports the following TTY modes:
TTY—for calls in which you type and read text on your TTY device
VCO(Voice-Carry-Over)—for calls in which you speak into your phone
and read text replies on your TTY device
HCO(Hearing-Carry-Over)—for calls in which you type text on your
TTY device on listen to voice replies on your phone’s speaker
You can set your TTY mode using your phone’sSettingsmenu at any time, or
by issuing commands from your TTY device while on an active call
To set...

131
Settings
Setting TTY Baud Rate
By default, your phone’s TTY baud rate is set to 45.45, the baud rate required
for TTY calls within the U.S. To make calls outside the U.S., set your TTY baud
rate to 50.0.
To change the TTY baud rate:
Alert Timeout
Alert timeout controls the amount of time the Call Alert tone sounds. The
display will continue to show the alert information even though the Call Alert
tone has stopped.
You can set your phone’s alert timeout rules from theSettings/Initial Setup
screen....

132
nextel.com
Return to Home
You can control the amount of time that the recent call screen displays after a
call. You can set different timeouts for phone calls and Nextel Direct calls:
After Phone—Set the time that the recent calls screen displays after a
phone call
After Prvt/Group—Set the time that the recent calls screen displays after
a private or group call
To set the recent calls timeout:
Voice Volume
Voice Volumesets the volume of the sound coming from your phone’searpiece
or speaker:
1From...