Motorola 58 Ghz Digital Manual

19
Getting Started
Using the Displays
Your base station and handset each have a display. 
When the base station and handset are not in use, 
the standby screen displays.
Base Station Standby Screen Example
Handset Standby Screen Example
Left Soft Key
FunctionRight Soft Key 
Function
VSU
Menu
2 NEW CALLS
Time
Ringer Off
Left Soft Key
FunctionBattery Meter
Right Soft Key 
Function
VSU
m
4:26 PM
W
Menu
4110W43o.book  Page 19  Friday, July 25, 2003  8:33 PM 

20
Getting Started
Using the Soft Keys
On the standby screen, the left and right soft keys 
perform the function displayed above the key. For 
example, pressing the left soft key (
REDIAL), opens 
the list of previously dialed phone numbers. 
When in the 
MENU list, use the soft keys to scroll (t 
and 
s) through the list. When setting some features, 
for example 
KEYPAD TONE, use the soft keys to 
select 
ON or OFF. When setting other features, for 
example 
RINGER VOLUME, use the soft keys (t and 
s)...

21
Setting Up Your Base Station and Handset
Setting Up Your Base 
Station and Handset
Setting the Time on the Handset
Note: The time displays only on the handset, not the 
base station.
Personalizing Your Base Station and 
Handset
You can personalize the base station and handset by 
setting unique ringer tones, adjusting the ringer 
volume, and setting the language (English, Spanish, 
Portuguese, or French).
Note: When setting options on the base station, 
select 
BASE SETTINGS from the MENU. When...

22
Setting Up Your Base Station and Handset
Setting the Ringer Volume
If you set the volume to the lowest level, OFF, the 
base station and handset do not ring when you 
receive a call. When set to 
OFF, W displays.
Setting the Ringer Tone
This option sets a ringer tone for incoming calls.
Action
1Press MENU (a).
2Scroll (a) to BASE SETTINGS or 
HANDSET SETTINGS, then press OK (a).
3Ensure RINGER VOLUME is highlighted, 
then press 
OK (a).
4Press the left or right soft key (a) to 
increase or decrease...

23
Setting Up Your Base Station and Handset
Setting the Keypad Tone
This option turns the keypad tones on or off. When 
set to 
ON, the base station or handset beeps every 
time you press a key or button.
4Scroll (a) through the ring tones. Each 
tone plays as you scroll through them. 
When you hear the ring tone you want, 
press 
OK (a).
5Press CLEAR or OFF twice to return to the 
standby screen, or scroll (
a) to another 
option.
Action
1Press MENU (a).
2Scroll (a) to BASE SETTINGS or 
HANDSET...

24
Setting Up Your Base Station and Handset
Setting the Contrast
This option adjusts the display contrast.
Setting the Language
This option changes the language used in the 
options menu list.
Note: This option does not change the language for 
the soft keys, for example, 
MENU and REDIAL. The 
language setting is unique to the base station and 
handset. Changing the language on one, does not 
change the language on the other.
Action
1Press MENU (a).
2Scroll (a) to BASE SETTINGS or 
HANDSET SETTINGS,...

25
Setting Up Your Base Station and Handset
Setting the Vibrate Control (handset only)
This option causes your handset to vibrate when you 
receive a call.
4Press the left or right soft key (a) to scroll 
to the language of choice, then press 
OK(a).
5Press CLEAR or OFF twice to return to the 
standby screen, or scroll (
a) to another 
option.
Action
1Press MENU (a).
2Scroll (a) to HANDSET SETTINGS, then 
press 
OK (a).
3Scroll (a) to VIBRATE CONTROL, then 
press 
OK (a).
4Press the left or right soft...

26
Setting Up Your Base Station and Handset
Setting the Low Battery Tone (handset only)
This option alerts you when the battery charge is low.
Setting the Range Tone (handset only)
This option alerts you when the handset is out of 
range from the base station.
Action
1Press MENU (a).
2Scroll (a) to HANDSET SETTINGS, then 
press 
OK (a).
3Scroll (a) to LOW BATT TONE, then press 
OK (a).
4Press the left or right soft key (a) to 
select 
ON or OFF, then press OK (a).
5Press OFF twice to return to the...

27
Setting Up Your Base Station and Handset
Setting the Tone/Pulse (base station only)
This option sets the base station for either tone or 
pulse dialing.
Action
1Press MENU (a).
2Scroll (a) to BASE SETTINGS, then 
press 
OK (a).
3Scroll (a) to TONE/PULSE, then press 
OK (a).
4Press the left or right soft key (a) to 
select 
TONE or PULSE, then press OK 
(
a).
5Press CLEAR twice to return to the standby 
screen, or scroll (
a) to another option.
4110W43o.book  Page 27  Friday, July 25, 2003  8:33 PM 

28
Using the Basic Functions
Using the Basic Functions
Making and Ending a Call Using the 
Base Station
Action
1
Press v. The speakerphone icon v lights 
up when the base station is on.
2When you hear the dial tone, dial the 
number.
or
Enter the phone number, then press v. 
This lets you see the phone number on the 
display before the number is dialed.
The speakerphone icon 
v lights up and 
LINE IN USE and jX (where X is the 
handset number) display on the base station 
when on a call.
During a call, a...