Mitsubishi Xl9u Lcd Projector User Manual
Here you can view all the pages of manual Mitsubishi Xl9u Lcd Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
EN – 21 ENGLISH XL9U XL9UCAPTURE : ENTER X2 CANCEL : MENUCAPTURE : ENTER + ENTER CANCEL : MENU XL9U XL9UCAPTURE : ENTER X2 CANCEL : MENU LVP-XD300 LVP-XD300Capturing Logo ! x1 x2 FULL Setting of the image displayed during startup or muting You can display your desired image as the startup screen (or splash screen). Using the menu, you can also use such image as a background that is displayed while the video is muted or no signal is supplied. Important: •You cant set IMAGE CAPTURE when PASSWORD FUNCTION...
Page 22
EN – 22 FEATUREPASSWORD FUNCTION XGA60opt. LOCK UNLOCKOK OK PASSWORD CONFIRM O K CANCEL FEATUREPASSWORD FUNCTION XGA60opt. LOCK UNLOCKOK OK PASSWORD O K CANCEL Password function This projector is equipped with the password func- tion that is designed for prevention of theft and wrong operation by children and restriction on operation by other than specified users. The pass- word function has 3 modes as follows. DISPLAY INPUT .......... When the projector is turned on, the startup screen (or splash...
Page 23
EN – 23 ENGLISH Lamp replacement 8. Tighten up the screws (c) using a Phillips screwdriver (+). 9. Tighten up the screw (a) using a Phillips screwdriver (+) to secure the lamp cover. Reset of the lamp operation time Plug in the power cord, and reset the lamp operation time by holding down the $, %, and POWER buttons on the control panel at the same time. Important: •Unless these 3 buttons are pressed at the same time, the lamp operation time isn’t reset. •Make sure that the STATUS indicator is lit...
Page 24
EN – 24 Maintenance Cleaning of the projector and the ventilation slots Use a soft cloth to clean the projector and the ventila- tion grilles. When the grilles become dirty, wipe them with a soft cloth dampened with diluted mild deter- gent, and then wipe them with a dry cloth. To protect the surface of the projector from fading or deteriorating: •Do not spray insecticide on or inside the projector. •Do not use benzine or thinner to clean it. •Do not let rubber or plastic materials come into contact with...
Page 25
EN – 25 ENGLISH Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. Images arent projected on the screen. Problem Power isnt turned on. Images arent projected on the screen. Images suddenly disappear. NO SIGNAL is displayed. The screen for entering the password appears. Cause and solution •Check the states of the indicators. POWER Off Steady red Blinking red / green STATUS Off Off Blinking...
Page 26
EN – 26 Troubleshooting (continued) Images arent projected correctly. Problem Projected images are shaking. Projected images are displaced. Projected images are distorted. Projected images are dark. Projected images are blurred. Afterimages persist on the screen. Red, blue, and green dots appear in projected images. Black dots appear in projected images. Fine streak pattern appears in projected images. Projected images (and/ or audio) appear wavy and distorted. Tint in projected images is incorrect. Only...
Page 27
EN – 27 ENGLISH Others Cause and solution •This air comes out as a result of cooling the inside of the projector. This isnt a product malfunction. •Check that the volume isnt set to low. •The microcomputers inside the projector may be wrongly operating because of noise. ➔Press the POWER button to turn off the lamp and unplug the power cord from the wall outlet. Wait about 10 minutes, plug the power cord in, and try again. •This indication appears when the ambient temperature rises high. When the ambient...
Page 28
EN – 28 Indicators POWER STATUS VIDEO KEYSTONE COMPUTERAUTO POSITION POWER Steady red Steady green Steady green STATUS Off Blinking green Steady green CONDITION Stand-by Lamp stand-by (about 1 minute) The power is on. (Normal condition) NOTE The POWER button cannot be used to switch between on and off. POWER Steady green or Steady red Steady red Steady green Steady red Steady red Blinking green/red Blinking green/red STATUS Blinking orange Blinking green Blinking green/red Blinking red Steady...
Page 29
EN – 29 ENGLISH Specifications Type Model Rated power supply Rated input LCD panels Colors Projection lens Light source lamp Picture size PC compatibility Video compatibility Audio output Speaker S-video input Video input Audio input Analog RGB input Control connector Outside dimensions Weight Length of power cord Temperature, humidity (performance guaranteed) LCD projector XL9U 100 - 240 V AC, 50 / 60 Hz 2.9 A 0.6-inch LCD panel: 3 pieces (for R, G, B) Pixels 1024 x 768 = 786432 pixels Total...
Page 30
EN – 30 Specifications (continued) Connectors 1R(RED)/CR 2G(GREEN)/Y3B(BLUE)/CB4GND5GND6GND7GND8GND9DDC 5V10 GND11 GND12 DDC Data13 HD/CS14 VD 15 DDC Clock 1TXD IN2––3––4GND –55VIN6CLOCK OUT7RXD OUT 8DATA OUT 1 352 681 5 116 10 15 267 708248.7 267 281275261 70 73 SERIAL (8 pin) Pin No. Name I/O COMPUTER / COMPONENT VIDEO IN/OUT (Mini D-SUB 15 pin) Pin No. Spec. Dimensional drawings (unit : mm) 1Safety Manual / Quick Start up 871D393-50 1CD-ROM 919C133-50 1Carrying case 772P045-10 2Batteries -...