Mitsubishi Xl8u Lcd Projector User Manual

EN – 1
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
XL8
XL4
SL4
LCD PROJECTOR
MODEL
XL8U
XL4U
SL4U
User Manual 

EN – 2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an...

EN – 3
ENGLISH
Contents
Trademark, Registered trademark
Macintosh is registered trademark of Apple Computer Inc.
Other brand or product names are trademarks or registered trademarks of their respective holders.
Declaration of Conformity
Model Number : XL8U / XL4U / SL4U
Trade Name : MITSUBISHI ELECTRIC
Responsible party : Mitsubishi Digital Electronics America, Inc.
9351 Jeronimo Road, Irvine, CA 92618 U.S.A
Telephone number : +1-(949) 465-6000
This device complies with Part 15 of the FCC Rules....

EN – 4
Important safeguards
Please read all these instructions regarding your
LCD projector and retain them for future reference.
Follow all warnings and instructions marked on the
LCD projector.
1. Read instructions
All the safety and operating instructions should
be read before the appliance is operated.
2. Retain instructions
The safety and operating instructions should be
retained for future reference.
3. Warnings
All warnings on the appliance and in the
operating instructions should be adhered to....

EN – 5
ENGLISH
WARNING:
Unplug immediately if there is something
wrong with your projector.
Do not operate if smoke, strange noise or odor comes
out of your projector. It may cause fire or electric
shock. In this case, unplug immediately and contact
your dealer.
Never remove the cabinet.
This projector contains high voltage circuitry. An
inadvertent contact may result in an electric shock.
Except as specifically explained in User Manual, do
not attempt to service this product by yourself.
Please contact...

EN – 6
Overview
POWER STATUS
VIDEO KEYSTONE
ENTER
MENU COMPUTERAUTO POSITION
4 1
2
3
5
6
7
8 9
POWER STATUS
VIDEO KEYSTONE
ENTER
MENU COMPUTERAUTO POSITION
10
11
6 1
2345
2
10
5431
9867
11
1Remote control sensor (Front)
2Control panel
3Speaker
4Terminal panel
5Air outlet grille
6Kensington Security Lock Standard
connector
7Foot adjustment button
8Lens
9Air outlet grille
10Remote control sensor (Rear)
11Air inlet grille
Control panel
1Focus ring
2Zoom ring
3POWER indicator
4POWER button
5COMPUTER /
$ $$...

EN – 7
ENGLISH
Bottom side
3
1
2
POWER
PAGE
VOLUME
EXPAND
SOURCEKEYSTONEAUTOPOSITION
STILLMUTE
ENTER
PinP MENUUP DOWN
1
2
3
4
5
6
7
13
12
11
10
9
8
1Lamp cover
2Air inlet grille / Filter cover
3Adjustment foot (Left/Right)
Caution:
Do not replace the lamp immediately after using the
projector because the lamp would be extremely hot and
it may cause burns.
Remote control
1POWER button
2SOURCE button
3KEYSTONE button
4STILL button
5Direction buttons
6MENU button
7EXPAND button
8VOLUME + and – buttons
9PinP...

EN – 8
20˚
15˚20˚
15˚
30˚ 30˚
Remote control
20˚
20˚
Battery loading
First Loading:
When you use the remote control for the first time, pull out the
insulation sheet.
Replacement of the battery:
1. Turn the remote control upside down.
2. Push the lock inward and pull out the battery holder.
3. Remove the old battery.
4. Load a new battery with the positive (+) side up.
5. Push in and click the battery holder.
CAUTION
•Use of a battery of wrong type may cause explosion. Use MATSUSHITA battery, type CR2025...

EN – 9
ENGLISH
Installation
Layout of the projector
Image size varies depending on the distance between the screen and the projector.
Front projection
Front projection, ceiling mounting
For ceiling mounting, you need the ceiling mount kit
designed for this projector. Ask a specialist for
installation. For details, consult your dealer.
•The warranty on this projector does not cover any
damage caused by use of any non-recommended
ceiling mount kit or installation of the ceiling
mount kit in an improper...

EN – 10
Basic connections
This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal
computer that have analog RGB output connectors.
Important:
•Make sure that the connected device is turned off before starting connection.
•Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the
plug. Do not pull the cord.
•When the projector and the connected devices are located too close to each other, the...