Mitsubishi Xl6500u Lcd Projector User Manual
Here you can view all the pages of manual Mitsubishi Xl6500u Lcd Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
EN-11 Setting up your projector (continued) LENS SHIFT button To adjust the positions of the projector and the screen, use LENS SHIFT button. 1. Press the LENS SHIFT button. • The LENS SHIFT menu appears at the center of the screen. 2. Press the S, T, W or X button to move the image position. • When the T button is pressed, the image moves down. • When the S button is pressed, the image moves up. • When the X button is pressed, the image moves to the right. • When the W button is pressed, the...
Page 12
EN-12 Setting up your projector (continued) Front projection, ceiling mounting For ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installa- tion. For details, consult your dealer. • The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the ceiling mount kit in an improper location. • When using the projector mounted on the ceiling, set IMAGE REVERSE in the INSTALLATION...
Page 13
EN-13 Viewing computer images 2 1 AUDIO OUTAUDIO IN 1/2 2 1 2 1 A. Connecting the projector to a computer Preparation: • Make sure that the power of the projector and that of the computer are turned off. • When connecting the projector to a desktop computer, disconnect the RGB cable that is connected to the monitor. For analog connection: (For using the COMPUTER/COMPONENT VIDEO IN 2 terminal.) 1. Connect one end of the supplied RGB cable to the COMPUTER/COMPONENT VIDEO IN 2 terminal of the...
Page 14
EN-14 Viewing computer images (continued) 2 1 1. Plug the attached power cord into the power cord inlet of this projector. 2. Plug the other end of the power cord into a power outlet. • The power cords for use in the U.S. and Europe are included with this projector. Use the appropriate one for your country. • This projector uses the power plug of 3-pin grounding type. Do not take away the grounding pin from the power plug. If the power plug doesn’t fi t your wall outlet, ask an electrician to...
Page 15
EN-15 Viewing computer images (continued) C. Projecting images Preparation: • Remove the lens cap. 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up red. • If the projector was turned off before the lamp was cooled down suffi ciently last time, the fan may start rotating and the POWER button may not work after the main power switch is turned ON. (The STATUS indicator blinks green.) After the fan stops rotating, press the POWER button to turn back...
Page 16
EN-16 Viewing computer images (continued) Important: • Focus, zoom and lens shift adjustment is possible in the normal picture mode only. • When a 16:9 image is kept displayed for a long time before displaying 4:3 image, the afterimages of the black bars may appear on the 4:3 image screen. (See page 43.) To stop projecting: 13. Press the POWER button. • A confi rmation message is displayed. • To cancel the procedure, leave the projector for a while or press any button except the POWER button. 14....
Page 17
EN-17 Viewing video images Connecting to a video player, etc. 1. Connect one end (yellow) of the supplied audio/video cable to the VIDEO IN terminal of the projector. 2. Connect one end (white and red) of the supplied audio/ video cable to the audio input terminals (L/MONO, R) of the projector. 3. Connect the other end (yellow) of the audio/video cable to the video output terminal of the video equipment. 4. Connect the other end (white and red) of the audio/video cable to the audio output...
Page 18
EN-18 Connecting to video equipment having a HDMI terminal or DVI-D terminal You can project high-quality images by connecting the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) terminal of this projector to video equipment having a HDMI output terminal or DVI-D terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data that are output from DVD players. • HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital...
Page 19
EN-19 Equipment having a DVI-D terminalTo audio output terminalsAudio cable (option) To audio input terminals To DVI-D terminal DVI cable (option)COMPUTER/COMPONENT VIDEO DVI-D (HDCP) Connection (for video equipment having a DVI-D terminal) • For connection to the DVI-D terminal, use a commercially available DVI cable. • Some cables may not be connected correctly depending on the size and shape of their connectors. • When DVI is selected as the input source, settings of FINE SYNC., TRACKING,...
Page 20
EN-20 Viewing video images (continued) C. Projecting images Preparation: • Remove the lens cap. 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up red. • If the projector was turned off before the lamp was cooled down suffi ciently last time, the fan may start rotating and the POWER button may not work after the main power switch is turned ON. (The STATUS indicator blinks green.) After the fan stops rotating, press the POWER button to turn back on...