Mitsubishi Xl5980u Lcd Projector User Manual

EN – 11
ENGLISH
For using the COMPUTER/COMPONENT VIDEO INPUT 2 (Mini D-SUB 15P) terminals
REMOTE
INREMOTE
OUTINPUT 1
INPUT 2R/PRB/PBG/Y H/HVV
AUDIO
IN
AUDIO
OUTY
CRS-232C RS-232C/MOUSEUSB
S-VIDEO
VIDEO
2
VIDEO
1
L
AUDIO
R MAIN
AC INTo COMPUTER IN
 (Mini D-SUB 15P)
To COMPUTER OUTPUT
When outputting to both the computes monitor and the projector. PC audio cable (option)
RGB cable for PC (option)
Computer
To COMPUTER AUDIO IN
To PC audio 
output
AUDIO OUT
MONITOR OUTPUT
To monitor port
For using the...

EN – 12
Adjustment foot
screen
Preparing the projector for operation
Getting ready for projection
1. Attach the provided power cord to the projector.
2. Plug the power cord in the wall outlet.
3. Remove the lens cap.
Warning:
•Do not look into the lens directly when the projec-
tor is “ON.”
•The lens cap is for protecting the lens. If you leave
the lens cap on the lens with the projector turned
on, it may be deformed. Remove the lens cap when
you turn on the projector.
•The power cords for use in the...

EN – 13
ENGLISH
To operate projector power ON
4.Press the ZOOM/FOCUS button to FOCUS. “FO-
CUS” will appear on the display.
5. Adjust with the + or - button to get a fine picture.
6.  Select the desired external input source by using
the COMPUTER 1,2 or VIDEO1,2 button on the re-
mote control or the SOURCE button on the control
panel.
•Pressing the SOURCE button on the control panel
repeatedly will select VIDEO 1, VIDEO 2, COM-
PUTER 1 and COMPUTER 2.
•The projector automatically selects the appropriate...

EN – 14
VOLUME     15
To operate projector power ON (Continue)
Turning off the projector
Use the following procedure to turn off the power.
Don’t turn off the power by switching off the main
power switch or disconnecting the power plug be-
cause these methods may cause deterioration
in the lamp’s performance or failure in the product.
11.Press the POWER button.
The message “POWER OFF? YES : PRESS AGAIN”
appears on the screen.
•To exit this mode, press any button except the POWER
button. (Some buttons on...

EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1.  Press the MENU button.
2.  Press the $ or % button to select the INSTALLA-
TION menu.
3.  Press the ENTER button (or } button).4.  Press the { or } button to select AUTO POWER
OFF.
5.  Press the $ or % button to adjust auto power off
time.
6.  Exit the menu system by pressing the MENU but-
ton several times.
•If the menu operation is not working, press the
RESET button on the terminal...

EN – 16
IMAGE REVERSE
ON AUTO POWER 
ON
OFF
AUTO POWER 
OFFOFF
ON
INSTALLATION
BLUE
OFF
BACK COLOR
USER BLACK
XGA60
LENS SHIFT
SPLASH SCREEN
MUTE MODE
STANDARD
opt.
LAMP MODE
1 IMAGE
CONTRAST.........Adjusts the picture contrast. The contrast becomes higher as the
number increases.
BRIGHTNESS.....Adjusts the image brightness. The image becomes brighter as
the number increases.
sRGB....................Select ON to display an image emphasizing on the color
reproducibility.
•When sRGB is ON, COLOR MATRIX,...

EN – 17
ENGLISH
3 FEATURE
MENU POSITION.......Use to select the position of the menu on the screen,   (upper
left) or 
 (lower right).
EXPAND MODE .. Select the mode for enlarging screen. See page 20.
FRAME POSI.......Sets the position of sub screen. See page 20.
VIDEO SIGNAL ...When AUTO is selected, the appropriate video format is
automatically selected depending on the input signal. If the
image isn’t displayed correctly, select the desired video format
manually.
SCART INPUT.....Select ON when...

EN – 18
User memory for signal setting
This projector can memorize the maximum of 2 signal
menu settings.
Memorizing the setting
1.  Select MEMORIZE 
 in the SIGNAL menu, and press
the ENTER button.
2.  Press the $ or % button to select the memory which you
wish to record (USER 1 or USER 2).
3.  Press the ENTER button.
•Any buttons are ineffective about 3 seconds of
recording setting.  Wait for recording to have been
completed before operating the buttons.
Select the user setting
Select MEMORY CALL in...

EN – 19
ENGLISH
CONTRAST R
COLOR TEMP.-USER
0
CONTRAST B 0
BRIGHTNESS R 0
BRIGHTNESS B 0
Color temperature
1.  Select COLOR TEMP in IMAGE menu.
2.  Press the $ or % button to select USER 
.
3.  Press the ENTER button.
4.  Press the { or } button to select the desired item.
5.  Press the $ or % button to adjust the item.
6. Repeat steps 4 and 5 for more adjustments.
7. Exit the menu system by pressing the MENU but-
ton several times.
Adjustment from personal computer
Although this projector sets proper...

EN – 20
Advanced features for presentation
Expand
By pressing the EXPAND button on the remote con-
trol, you can magnify the detailed image of the picture.
You can also view the screen displaying the picture as
its original size (native resolution display).
Setting the Expand mode
1. Press the MENU button.
2. Press the $ or % to select the FEATURE menu.
3. Press the ENTER button.
4.Press the  { or } button to select EXPAND MODE
or FRAME POSI.
5.Press the $ or % to set the EXPAND MODE or
FRAME POSI....