Mitsubishi Xl5950lu Lcd Projector User Manual

EN – 21
ENGLISH
Mouse remote control
By connecting to personal computer through the USB or PS/2 port, you can operate your computer with the
projector remote control.
Projector + computer with USB connector
Operation
•Turn off computer and the projector before connecting with PS/2 port. When connecting the computer with the
projector when the personal computer is on, the remote control does not work as a mouse. In that case, restart
the personal computer.
•When the projector is connected with USB...

EN – 22
The lamp is designed to project the image on the LCD
panels. When the lamp no longer functions, replace it
with a new one.
Caution:
•Do not remove the lamp immediately after using
the projector, you may get burned because of the
high temperature of the lamp.
•When you replace the lamp, press the power button
to power off, then wait for 120 seconds in stand-by
mode to allow the lamp and LCD panels to cool. Turn
off  the main switch,  unplug the power cord from
the outlet, and wait one hour so that...

EN – 23
ENGLISH
Maintenance
Caution:
Be sure to turn off the projector and unplug the power
cord from the wall outlet before you perform any main-
tenance on the projector.
Cleaning the air-filter
Clean the air-filter frequently (about once a month). If
the filter or ventilation slots become clogged with dirt
or dust, the temperature inside of the projector may
rise and cause some troubles, such as damage of in-
side parts, and shortening the life of panel.
•When the temperature inside of the projector...

EN – 24
About the terminal cover (with Anti-Theft Alarm device)
This projector includes a terminal cover with Anti-
Theft Alarm device. Once the terminal cover is
installed, its Anti-Theft Alarm device will detect
vibration caused by the projector being moved and
emit an alarm.
•Mitsubishi assumes no responsibility or liability
for theft or other damages.
Procedure for setting the Anti-Theft
Alarm device
Insert dry cell batteries into the theft warning
device
1. Open the battery cover of the theft...

EN – 25
ENGLISH
Troubleshooting
The following offers solutions to some of the common problems you may encounter. We suggest that you consult
this chart before contacting your dealer.
CAUSEPOSSIBLE SOLUTIONSPROBLEMS
Only the motion area in the
image supplied from the
computer is not displayed.
•The air inlet slots, outlet slots  or air filter is clogged
with dust or some objects.
POWER indicator does not light up.
•Power cord is unplugged from the outlet.
•Power cord is disconnected from the projector....

EN – 26
Indicators
The projector has three indicators each of which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your
dealer.
TEMP indicator
LAMP indicator
POWER indicator
LAMP TEMPPOWER
Normal condition
Abnormal condition
Steady 
red
Steady 
green
Steady 
greenBlinking
green
Steady 
green
POWER LAMP TEMPCONDITION Notes
The POWER is ON. (Normal condition) Lamp stand-by (about for 1 minute) The...

EN – 27
ENGLISH
Specifications
LCD projector
XL5950U|
XL5950LU
AC100 - 240V,  50 / 60Hz
3.8 A
16,770,000 colors
F 1.8 - 2.1*   f = 51 - 64 mm*
270 W SHP
60 - 300 inch* (aspect ratio 4:3)
Resolution : 640 x 400 (Expand) - 1024 x 768 - 1600 x 1200 (Compress)
Sync on Green available
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60
DVD (Component) / HDTV (1080i) / 720p / (525p)
5 W Mono
Round type (4Ω 5W) × 1
Luminance signal: 1.0 Vp-p 75Ω    (negative sync.)
Chroma signal: 0.286 Vp-p 75Ω  (burst...

EN – 28
Specifications (continued)
1 Sticker for Anti-Theft Alarm 853C588-10
1 Filter 620D119-10
1 Remote control 939P955-10
1 Quick reference card 857D050-10
4 Battery–
1 Safety manual 871D389-10
1 CD-ROM 919C132-10
Connectors
Dimensional drawings
(mm)
Replacement part
(Option / Not included in the box)
Spare marcury lamp 499B035-10
(VLT-XL5950LP)
    What’s included in the box
2   AC power cord 246C483-10
246C383-20
1 Audio/Video cable 246C381-10
1 RGB cable for PC 246C448-10
2 RS-232C cable...

EN – 29
ENGLISH
Specification of RGB signals in each computer mode of the projector
*1 : The Expand mode and the PinP mode don’t
function with this signal.
•When the EXPAND MODE of FEATURE menu is
set to real screen display, by pressing the EXPAND
button on the remote control, it will switch to the
screen displaying the picture as its original size (real
screen display).  In the real screen display, pictures
will be black-framed when picture resolution is
lower than 1,024 x 768.
Important:
•Some...

EN – 30
L
 L
I
WW
H
Height
Width
•The above numbers are approximate, and may be slightly different from the actual measurements. inch
48
60
90
120
150
180 cm
163
203
305
406
508
610  inch
80
100
150
200
250
300 inch
64
80
120
160
200
240m
5.6
7.0
10.6
14.2
17.8
21.4m
8.4
10.5
15.9
21.3
26.7
32.1  inch
220
276
417
559
701
843 inch
331
413
626
839
1051
1264 cm
122
152
229
305
381
457 cm
203
254
381
508
635
762
ScreenDistance from the screen : L
Maximum
zoom (WIDE)Minimum
zoom (TELE)Diagonal...