Mitsubishi Xd60u Data Projector User Manual
Have a look at the manual Mitsubishi Xd60u Data Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 561 Mitsubishi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 61
E-60
Replacing the Lamp Cartridge
5Mount the new lamp cartridge.
(1) Place the lamp cartridge with its socket facing to the
right and push it in slowly.
(Line it up with the screw holes in the projector.)
6Mount the lamp cover.
(1) Set the tip of the lamp cover in place, then close the
lamp cover.
7Reset the Lamp Timer.
Connect the power cable, switch on the power, and then reset.
Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization...](http://img.usermanuals.tech/thumb/3285/91642/w64_mitsubishi-xd60u-manual_d-60.png "Page 61
E-60
Replacing the Lamp Cartridge
5Mount the new lamp cartridge.
(1) Place the lamp cartridge with its socket facing to the
right and push it in slowly.
(Line it up with the screw holes in the projector.)
6Mount the lamp cover.
(1) Set the tip of the lamp cover in place, then close the
lamp cover.
7Reset the Lamp Timer.
Connect the power cable, switch on the power, and then reset.
Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization...")
E-60 Replacing the Lamp Cartridge 5Mount the new lamp cartridge. (1) Place the lamp cartridge with its socket facing to the right and push it in slowly. (Line it up with the screw holes in the projector.) 6Mount the lamp cover. (1) Set the tip of the lamp cover in place, then close the lamp cover. 7Reset the Lamp Timer. Connect the power cable, switch on the power, and then reset. Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization verification display. Press the ENTER button again. See “Lamp Timer Reset” on Page E-53. Note: After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared. Contact a store that sells the XD60U for a replacement lamp. Indicate you need a VLT-XD50LP replacement lamp for the XD60U (order code 915P018-10). (2) Turn the two lamp cartridge screws clockwise to tighten them. (2) Turn the lamp cover’s screw clockwise to tighten it. CAUTION This projector uses a lamp that contains mercury. Disposal of the lamp or the projector with the lamp may be regulated due to environmental considerations. For disposal or recyling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. (For US only).
E-61 Specifications ModelXD60U Optical Method of projection : DLP™ (single chip DMD) DMD 0.7 inches 1024768 dots Lamp 170 W high pressure mercury lamp Projection lens : Manual zoom (1.2), Manual focus F = 2.6 – 2.9, f = 27.5 – 33.0 mm Image size Minimum 26 inch (at projection distance of 1.20 m / 3.9 feet telephoto) Maximum 300 inch (at projection distance of 11.81 m / 38.76 feet wide) Light Output 1800 lumens Contrast Ratio 2000:1 (Full on/off) Electrical Inputs Video (NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM) RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz) Color Reproduction Full color (16,770,000 colors) Resolution VGA (640480) expansion/true, S-VGA (800600) expansion/true XGA (1024768) true, S-XGA (12801024) compression Input Current 2.4 A Power Requirement 100 - 240 V AC, 50/60 Hz Power Consumption 240 watts (170 watts in Low mode) Mechanical Dimensions Excluding Stand 190 mm (W)53 mm (H)242 mm (D) 7.5 in.(W)2.1 in.(H)9.5 in.(D) Weight Approximately 1.5 kg / 3.3 lbs Operational Temperatures Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity • Specifications and design are subject to change without notice.
E-62 Table of Supported Frequencies The projector automatically identifies the signal input from the computer and selects the optimum resolution as shown on the table below. Manual adjustments may be required for some input signals. See “Picture Adj. / Fine Picture / H Position / V Position” on page E- 42, 43. : Supported frequency : Not supported frequency * The projector does not support the ADC connector on Apple Macintosh. The display resolution is 1024768 dots. When displaying a signal with resolutions other than 1024768 dots such as 12801024, sizes of characters or lines may be uneven. VIDEO(NTSC) VIDEO(PAL/SECAM) VESA Apple Macintosh HDTV (1080i) (720p) SDTV (576p) (480p) 640350 640350 720350 640400 640400 720400 720400 640480 640480 640480 640480 800600 800600 800600 800600 800600 1024768 1024768 1024768 1024768 12801024 640480 823624 1024768 1152870 19201080 19201080 1280720 720576 72048015.734 15.625 31.5 37.9 31.5 31.5 37.9 31.5 37.9 31.5 37.9 37.5 43.3 35.2 37.9 46.9 48.1 53.7 48.4 56.5 60.0 68.7 64.0 35.0 49.7 60.2 68.7 33.8 28.1 45.0 31.3 31.560.0 50.0 70.1 85.1 70.0 70.1 85.1 70.0 85.0 60.0 72.8 75.0 85.0 56.3 60.3 75.0 72.2 85.1 60.0 70.1 75.0 85.0 60.0 66.7 74.5 74.9 75.1 60.0 50.0 60.0 50.0 60.0 SignalResolution VideoFrequencyHorizonral (kHz)Vertical (Hz)ComponentDigital Analog
E-63 STATUS SOURCESTANDBY AUTO MENUQUICK MENU Cabinet Dimensions Unit: mm (inch) 190 (7.5) 53 (2.1) 12 (0.5) 242 (9.5)
MITSUBIS HI ELECTRIC CORPORATION 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan