Mitsubishi Xd500u Data Projector User Manual
Here you can view all the pages of manual Mitsubishi Xd500u Data Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
6 DATA PROJECTOR MODEL XD500U User Manual This User Manual is important to you. Please read it before using your projector. EN ENGLISH
Page 2
EN-2The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu- lated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING Use the attached...
Page 3
EN-3 ENGLISH Contents Important safeguards................................................................................................................................ 4 Overview ................................................................................................................................................... 6 Remote control ......................................................................................................................................... 8 Installation...
Page 4
EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions The safety and operating instructions should be retained for future reference. 3. Warnings All warnings on the appliance and in the operating instructions should be adhered to....
Page 5
EN-5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your pro- jector. It may cause fire or electric shock. In this case, unplug immedi- ately and contact your dealer. Never remove the cabinet. This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in User Manual, do not attempt to service this product by yourself. Please...
Page 6
EN-6 Overview 1FOCUS ring 2ZOOM ring 3 Control panel 4 Air inlet grille 5 Remote control sensor (Front) 6 Air inlet grille 7 Air outlet grille 8 Terminal board 9 Speaker 10 Adjustment feet (front) 11 Adjustment feet (rear) 12 Lock bar 13 Foot Adjustment button (Front) 14 Lamp cover Caution:Do not replace the lamp immediately after using the pro- jector because the lamp would be extremely hot and it may cause burns. Control panel 1 Power button 2 AUTO POSITION / S button 3 COMPUTER / W button 4 MENU...
Page 7
EN-7 ENGLISH Overview (continued) Bottom side 1 Adjustment feet (rear) 2 Adjustment feet (front) Remote control 1ON button 2 MAGNIFY button 3 VOLUME UP, DOWN buttons 4 KEYSTONE button 5 MENU button 6ENTER button 7 AV (Audio/Video) MUTE button 8 OFF button 9 ASPECT button 10 PAGE UP, DOWN buttons 11 AUTO POSITION button 12 Direction buttons 13 FREEZE button 14 VIDEO, S-VIDEO buttons 15 COMPUTER (1, 2) buttons The UP and DOWN buttons are used in the KEY- STONE adjustment in addition to the volume...
Page 8
EN-8 Remote control Battery installationUse two (AA, R6) size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). Load the batteries from - spring side, and make sure to set them tightly. 3. Replace the back cover. Caution: Use of a battery of wrong type may cause explosion. Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteries...
Page 9
EN-9 ENGLISH Installation Layout of the projectorImage size varies depending on the distance between the screen and the projector. Front projection The above figures are approximate and may be slightly different from the actual measurements. Front projection, ceiling mountingFor ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installation. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of any...
Page 10
EN-10 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: Make sure that the connected device is turned off before starting connection. Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord. When the projector and the connected devices are located too close to each other, the...