Mitsubishi Xd300u Data Projector User Manual

EN – 11
ENGLISH
COMPUTER OUTCOMPUTER 2 / COMPONENT IN
COMPUTER 1 IN
COMPUTER
AUDIO IN
VIDEO 1 
INVIDEO 2 
IN
S-VIDEO
VIDEO
AUDIO
AC INAUDIO OUTMAIN
MOUSE /RS-232C
AUDIO OUT
MONITOR OUTPUT
to COMPUTER (1or2) IN
to  COMPUTER 
AUDIO INto monitor port
to  COMPUTER 
OUT
to PC audio
output
Audio cable (option)
When outputting to both a 
PC monitor and the projector.RGB cable for PC
RGB cable for PC (option)
computer
Projector + Personal computer
Important:
•When you use a long RGB cable instead of the cable...

EN – 12
Front adjustment feet Screen
Preparing the projector for operation
Getting ready for projection
1. Connect the power cord provided to the projector.
2. Connect the power cord to the wall power outlet.
3. Remove the lens cap.
Warning:
•Do not look directly into the lens when projector is
“ON”.
•The lens cap is for protecting the lens.  If you leave
the power on with the cap on, the cap may be warped.
Please remove the lens cap when you turn the power
on.
•This projector is equipped with the power...

EN – 13
ENGLISH
To operate projector power ON
•The picture might not be of optimum performance
in extreme hot or cold conditions. (The projector is
not malfunctioning.)
4.  Select the desired external input source by using
the COMPUTER 1,2 or VIDEO 1, 2 button on the
remote control or the COMPUTER or VIDEO but-
ton on the contorol panel.
•Pressing the VIDEO button on the control panel
repeatedly will select VIDEO IN 1 and VIDEO IN 2.
•Pressing the COMPUTER button on the control panel
repeatedly will...

EN – 14
To operate projector power ON (Continue)
Turning off the projector
7. Press the POWER button.
The message “POWER OFF? YES : PRESS AGAIN”
appears on the screen.
8. Press the POWER button within 10 seconds again.
•The light source lamp will be turned off.
•When the POWER button is not pressed within 10
seconds, the message will be disappeared.
•Pressing the POWER button second time  will shut
off the light source lamp, but the exhaust fan con-
tinues to operate for 120 seconds to cool down the...

EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1.  Press the MENU button.
2.  Press the $ or % button to select the INSTALLA-
TION menu.
3.  Press the ENTER button (or } button).4.  Press the { or } button to select AUTO POWER
OFF.
5.  Press the $ or % button to adjust auto power off
time.
6.  Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, turn off the
main power, wait about 10...

EN – 16
MENU POSITIONUPPER LEFT
EXPAND MODEEXPAND
VIDEO MODE
CCS
CINEMA MODE
VIDEO SIGNAL
AUTO
SCART INPUT
OFF
ANAMORPHICOFF
Opt
FEATURE
AA
?
TV60
AUTO
RESET ALLOKLANGUAGE
English
RESET ALLOK
AË
opt.
INSTALLATION
TV60
ON
AUTO POWER
ON
AUTO POWER
OFF
SPLASH
SCREEN
BACK COLOR
MUTE MODEOFF
OFF
BLACKON
BLUE
SETUP
IMAGE
REVERSEOFF
IMAGE 
CAPTURE
CONTRAST
sRGBBRIGHTNESS
COLOR MATRIX
COLOR TEMP
COLOR
TINT
SHARPNESS0
0 0
0 0
OFF
OFF
STANDARD
opt.
IMAGE
TV60
GAMMA MODEDYNAMIC
Menu operation (continued)
1 IMAGE...

EN – 17
ENGLISH
CLAMP 
POSITION
opt.XGA60
SIGNAL
SIGNAL - USER
0
CLAMP WIDTH0
VERT.SYNCAUTO
SHUTTER (U)0
SHUTTER (L)0
SHUTTER (LS)0
SHUTTER (RS)0
CLAMPCLAMP
CLAMPCLAMP
?
HORIZ.POSITION
opt.XGA60
SIGNAL
R G BR G B
VERT.POSITION
TRACKING
FINE SYNC
COMPUTER
INPUT
HOLD
USER0
0
0
0
RGBON
OK
CINEMA MODE .. When ON is selected, the film mode will be automatically activated when a film source signal
is inputted. When OFF is selected, the film mode will not be activated.
VIDEO SIGNAL ... When AUTO is selected,...

EN – 18
Adjusting the image
You can adjust the picture by using the IMAGE menu.
To control the level of white-to-black in the image :
Adjust CONTRAST in the IMAGE menu.  Press the
% button to increase the contrast and the $ button
to reduce it.
To control the light level of the image :
Adjust BRIGHTNESS in the IMAGE menu.  Press
the % button to lighten the image and the $ button
to darken the image.
To determine the intensity of the color :
Adjust COLOR in the IMAGE menu.  Press the %
button to increase...

EN – 19
ENGLISH
Adjustment from personal computer
This projector should automatically display the full
computer image on the projection screen. However,
with some computers signals this may not occur, in
this case press the AUTO POSITION button. If the
images are still not projected correctly, use the
MENU display to adjust the projected images.
HORIZ.POSITION
opt.XGA60
SIGNAL
R G BR G B
VERT.POSITION
TRACKING
FINE SYNC
COMPUTER
INPUT
HOLD
USER0
0
0
0
RGBON
OK
Top part of image curves :
Change the...

EN – 20
Advanced features
Expand
By pressing the EXPAND button on the remote con-
trol, you can magnify the detailed image of the picture.
Using the Expand mode
1. Press the EXPAND button.
• You can magnify different areas of the active pic-
ture by pressing the {, }, $, % button.
• You can change the magnification of the zoomed area
by pressing the + or - button.
2. Press the EXPAND button on the remote control
again.
The normal screen display will appear on the screen.
• Display enlargement does not...