Mitsubishi X120a Projector User Manual

21
ENGLISH
Specification of RGB signals in each computer mode of the projector
Signal mode resolution horizontal Vertical Normal Native (H x V) frequency (kHz) frequency (Hz) (H x V)  (H x V)
TV60 – 15.73 59.94 1024 x 768 640 x 438
TV50 – 15.63 50.00 1024 x 768 680 x 544
HDTV – 33.75 60.00 1024 x 576 (882 x 496)
PC98 640 x 400 24.82 56.42 1024 x 640 640 x 400
CGA70 640 x 400 31.47 70.09 1024 x 640 640 x 400
CGA84 640 x 400 37.86 84.13 1024 x 640 640 x 400
CGA85 640 x 400 37.86 85.08 1024 x 640 640 x 400...

22
Expand
By pressing the EXPAND button on the remote con-
trol, you can view the detailed image of the picture.
Setting the Expand mode
1. Press the MENU button once to display the on-
screen menu.
2. Press the $ or % button to select PRESENTATION
menu.
3. Press the ENTER button.
4. Press the{ or } button to select ZOOM MODE or
POSITION.
5. Press the $ or % button to set the ZOOM MODE
or POSITION.
6. Press the MENU button twice to exit the menu sys-
tem.
Normal picture
Actual size picture Zooming...

23
ENGLISH
PC-CARD
The projector can play back an image by using the PC-
CARD.
Using the PC-CARD
Use only the flash memory card of PCMCIA•ATA com-
patible type II.
•Due to PC-CARD type, some images can not be prop-
erly recorded.  Please contact your dealer.
Setting up the PC-CARD
1. Set the projector into standby mode by pressing the
main power switch. The POWER indicator lights up
red.
2. Press down the PC card slot cover button to open
the PC card slot cover.
3. Make sure the PC card is
going to be...

24
PC-CARD (Continue)
To automatically change the image, follow the steps
as shown below.
1. Press the MENU button.
2. Press the $ or % button to select PRESENTATION.
3. Press the ENTER button.
4. Press the { or } button to select AUTO SLIDE
TIME (3 - 99 sec.)
5. Press the $ or % button to set the time for auto
playback.
6. Press the{ or } button to select REPEAT.
7. Press the $ or % button to select ON or OFF.
8. Press the MENU button twice to exit the menu sys-
tem.
9. Press the PC CARD button.
10....

25
ENGLISH
Advanced feature with PC
PCV (PC Card Viewer)
PC-CARD viewer (PCV) is a utility software that lets
you record and project an  image to a PC-CARD by us-
ing a personal computer.
Environment
The following system software and hardware are nec-
essary to use the projector.
When you use a Macintosh
•Macintosh series loading 68030 or higher in
CPU and a video card with which more than
256 colors are available
•System7.1 or newer
•More than 8MB of Random-access memory
(RAM) space
When you use...

26
Advanced feature with PC (Continue)
Starting up PCV (For Windows)
For Windows 95 or Windows NT
1. Start up Windows.
2. Insert the PC card to the PC Card slot on the per-
sonal computer.
3. Start up Program Manager.
Click the [Start] button and select the [Program
(
P)]➔[Pcv]➔[PCV]command.
For Windows 3.1
1. Start up Windows.
2. Insert the PC card to the PC Card slot on the per-
sonal computer.
3. Double click the [PCV] icon in the PCV folder.
Command reference (For Windows 95)
The command references...

27
ENGLISH
Recording the image (For Windows)
When you wish to record the image of the display to a
PC-CARD.
1. Choose the PC-CARD drive using the drive bar
under the status bar.7. Click OK button.
8. Repeat steps 4 to 7 for other images.
9. Click the return button.
The presentation window will open. The recorded
image appears on the presentation window.
•Depending on the personal computer, the recorded
image can appear incorrectly. In this case, set the
delay time longer by using the Capture setting...

28
Editing the presentation (For Windows)
Delete the image
1. Select the image to be deleted.
2. Choose [
Delete image...] under the [File] menu.
•If you are using Windows 3.1, choose [Delete
image] under the [Option] menu.
Sequencing
A. Exchange images
You can exchange the images among images next to
each other.
1. Select an image to be exchanged.
2. Drag the image and drop on the next or previous
image.
Advanced feature with PC (Continue)
Preview an image
1. Double click the image.
The preview image...

29
ENGLISH
4. Click the properties button.Starting up PCV (For Macintosh)
1. Start up Macintosh.
2. Insert the PC card to the PC Card slot on the per-
sonal computer.
3. Double click the [PCV for Mac] icon.
Command reference
The command references are as shown below:
File
Create New presentation .Create a new presentation.
Open presentation ...Opens an existing presenta-
tion.
Close presentation ...Closes an opened presenta-
tion.
Save presentation .... Saves an opened presentation
using the same name....

30
When you wish to record the image from existing files.
1. Choose [Create New presentation...] under the
[
File] menu.
The new presentation window will open.
2. Choose [Open image file] under the [
File] menu.
3. Select the image you wish to record.
4. Click OK button.
The recorded image appears on the presentation
window.
5. Choose [Save presentation...] under the [File]
menu.
6. Choose [Done] under the [File] menu to quit from
PCV.
Editing the presentation (For Macintosh)
Delete the image
1. Select...