Home > Mitsubishi > Projector > Mitsubishi Se1u Projector User Manual

Mitsubishi Se1u Projector User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Mitsubishi Se1u Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 561 Mitsubishi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 22
    Add page 21 to Favourites
    image text
    Enable zoom 
    							41
Others
40
SERIAL terminalPin assignment
7
6
8
5
43
21
Signal Name
RXD
CTS
DSR
GND
RTS
Reserved
TXD
GND Pin No.
1
2
3
4
5
6
7
8Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
Do not connect anythingSending data
Signal ground
Mini DIN 8 pin connector
Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length:  1 bit
2 Communication format STX (02h)  Command (3Byte)  ETX (03h)
Only 1 command valid per communication.
3 Data format For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
4 Replies Acknowledge ACK (06h)  CR (0Dh)  Data ...  Normally ended
ACK (06h)  ESC (1Bh) ...  Aborted
No acknowledge NAK (15h)
If commands are to be sent consecutively, wait for the response from the projector
before sending the next command.
Main CommandsNote
•Contact your dealer for control cable and other commands.
Item Command
Power onPONPower offPOFIcon display onMO0Icon display offMO1Auto setting (RGB input)PATStatus display onDON
Status display offDOF
Specifications (Continued)
Item Command
Computer input selectIN1Y/P
B/PR input selectIN2
Video input selectIN3
S-video input selectIN4
    Add page 22 to Favourites
    Enable zoom
    All Mitsubishi manuals Comments (0)

    Related Manuals for Mitsubishi Se1u Projector User Manual