Mitsubishi Sa51 Projector User Manual
Here you can view all the pages of manual Mitsubishi Sa51 Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
EN – 21
ENGLISH
Advanced features for presentation
Expand
By pressing the EXPAND button on the remote con-
trol, you can magnify the detailed image of the picture.
You can also view the screen displaying the picture as
its original size (native resolution display).
Setting the Expand mode
1. Press the MENU button.
2. Press the $ or % to select the FEATURE menu.
3. Press the ENTER button.
4. Press the { or } button to select EXPAND MODE.
5. Press the $ or % to set the EXPAND MODE.
6. Press the MENU...
Page 22
EN – 22 The lamp is designed to project the image on the LCD panels. When the lamp no longer functions, replace it with a new one. Caution: •Do not remove the lamp immediately after turning off the lamp of the projector, you may get burned because of the high temperature of the lamp. •For lamp replacement, press the power button to power off, then wait for 60 seconds in stand-by mode to allow the lamp and LCD panels to cool. Then turn off the main switch, unplug the power cord from the outlet, and wait...
Page 23
EN – 23 ENGLISH Maintenance Caution: Be sure to turn off the projector and unplug the power cord from the wall outlet before you perform any main- tenance on the projector. Cleaning the air-filter Clean the air-filter frequently. If the filter or ventilation grill become clogged with dirt or dust, the temperature inside the projector may rise and shut off the power (the TEMP indicator starts to blink red). For side air outlet grill 1. To remove the filter cover, press the ridged area gently, push the...
Page 24
EN – 24 Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. CAUSE •The air inlet grill, outlet grill or air filter is clogged with dust or some objects. POWER indicator does not light up. •Power cord is unplugged from the outlet. •Power cord is disconnected from the projector. •The main switch is turned off. •The lamp lid is open. POWER indicator blinks red. •The projector has been turned...
Page 25
EN – 25 ENGLISH Indicators The projector has three LED Indicators which shows the working condition of the projector. The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your dealer. Normal condition Abnormal condition à á Steady red Steady green Steady greenBlinking green Steady green POWER LAMP TEMPCONDITION Notes The POWER is ON. (Normal condition) Lamp stand-by (about for 1 minute) The power button cannot be used to switch ON and OFF...
Page 26
EN – 26 Specifications LCD projector LVP-SA51U AC100V ~ 240V, 50 / 60Hz 2.3 A 0.9-inch LCD panel: 3 pieces (for R, G, B) Pixels 800 × 600 = 480,000 pixels Total 1,440,000 pixels Active pixel rate: 99.99 % or more (each panel) 16,770,000 colors F 2.3~2.6 f = 36.0 mm ~ 43.2 mm 150 W UHP (2, 000 Hours) 40 inch ~ 300 inch (aspect ratio 4:3) Resolution : 640 x 400 - 800 x 600 + Compressed 1024 x 768 Sync on Green available NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60 DVD (Component) / HDTV...
Page 27
EN – 27 ENGLISH Connectors PC analog RGB input Use to input video signals (analog RGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) 1*//0 41&$ 1*//0 41&$ 3 3&% $3µ ( (3&&/ : (306/% # #-6& $# (306/% (306/% %%$%5 (306/% )%$4 (306/% 7% (306/% %%$$-, (306/% RS-232C input Use to control the projector with the personal computer, or control the personal computer with remote con- trol. Use the provided RS-232C cable (Mini DIN 8P-D-SUB 9P) for...
Page 28
Printed in Japan 871D305A10