Mitsubishi S490u Projector User Manual

´EN – 11
ENGLISH
For computer with Mini D-SUB 15P terminal (IBM PC or IBM PC compatibles etc.)
REMOTE
AUDIO  2  IN COMPUTER  2  IN
AUDIO  OUT COMPUTER  OUT
AUDIO  1  IN COMPUTER  1  INDIGITAL
ANALOGINPUT SELECT
MAIN
AC IN OI
L
R
S-VIDEO
VIDEO
AUDIO VIDEO 1 IN VIDEO 2 INUSB
RS-232C
AUDIO OUT
MONITOR OUTPUT
to COMPUTER IN (Mini D-SUB 15P)
to COMPUTER AUDIO INto monitor
port
to COMPUTER 
OUT
to PC audio 
output
PC audio cable (option)
When outputting to both a PC monitor and the projector.RGB cable for PC...

EN – 12
Adjustment foot
screen
Preparing the projector for operation
Getting ready for projection
1. Connect the power cord provided to the projector.
2. Connect the power cord to the wall power outlet.
3. Remove the lens cap.
Warning:
•Do not look directly into the lens when projector is
“ON”.
•The lens cap is for protecting the lens.  If you leave
the power on with the cap on, the cap may be warped.
Please remove the lens cap when you turn the power
on.
•This projector is equipped with the power cords...

´EN – 13
ENGLISH
To operate projector power ON
•The picture might not be of optimum performance
in extreme hot or cold conditions. (The projector is
not malfunctioning.)
4.   Press the ZOOM/FOCUS button to FOCUS. “FO-
CUS” will appear on the display.
5. Adjust with the + or - button to get a fine picture.
6.   Press the ZOOM/FOCUS button to ZOOM. “ZOOM”
will appear on the display.
7. Adjust with the + or - button to get an approximate
size.
•Focus and zoom adjustment  is possible in the normal
picture...

EN – 14
AUDIO     15
To operate projector power ON (Continue)
Turning off the projector
9. Press the POWER button.
The message “POWER OFF? YES : PRESS AGAIN”
appears on the screen.
•To exit from this mode,  press any button except
the POWER button. (Some buttons on the remote
control do not work for exit from this mode.)
10.Press the POWER button again.
The light source lamp will be turned off.
Pressing the POWER button second time  will shut
off the light source lamp, but the exhaust fan con-
tinues to...

EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1.  Press the MENU button.
2.  Press the $ or % button to select the INSTALLA-
TION menu.
3.  Press the ENTER button (or } button).4.  Press the { or } button to select AUTO POWER
OFF.
5.  Press the $ or % button to adjust auto power off
time.
6.  Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, press the
RESET button on the terminal...

EN – 16
IMAGE REVERSE
OFF AUTO POWER 
ONOFFAUTO POWER 
OFF
IRIS OFF
ON
INSTALLATION
ON
STANDARD
BACK COLOR
OFF BLUE
XGA60
LAMP MODE
SPLASH SCREEN
opt.
XGA60
MENU POSITION
VIDEO SIGNAL AUTO
LANGUAGE English
RESET ALL OK ANAMORPHIC OFF
A
Ë ?
EXPAND MODE 1.
3. 1.
FRAME POSI.
A A
AA
FEATURE
opt.
1 IMAGE
CONTRAST......... Adjusts the picture contrast. The contrast becomes higher as the
number increases.
BRIGHTNESS.....Adjusts the image brightness. The image becomes brighter as
the number increases....

EN – 17
ENGLISH
ANAMORPHIC....Select ON when playing DVD discs containing data of letterboxed images.
LANGUAGE........Use to select the language used in the menus. (
 / English / Español / Deutsch / Français / Italiano
/ 
)
RESET ALL.........Use to reset the MENU settings (except LANGUAGE).
•When the LANGUAGE in FEATURE menu is set to English and NTSC video format is selected, the brightness is
decreased 15 points by set-up cancel function for U.S. (The indicated value is not changed.) The image becomes...

EN – 18
Adjusting the image
You can adjust the picture by using the IMAGE menu.
To control the level of white-to-black in the image :
Adjust CONTRAST in IMAGE menu.  Press the %
button to increase the contrast and the $ button to
reduce it.
To control the light level of the image :
Adjust BRIGHTNESS in IMAGE menu.  Press the %
button to lighten the image and the $ button to
darken the image.
To determine the intensity of the color :
Adjust COLOR in IMAGE menu.  Press the %
button to increase the amount...

EN – 19
ENGLISH
Adjustment from personal computer
Although this projector sets proper signal systems
automatically for the image signal from personal
computers, it cannot be applied to some of personal
computers.  In this case, press the AUTO POSITION
button.  If the images are still not projected correctly,
use the MENU display to adjust the projected im-
ages.
Image moved to right or left :
Adjust HORIZ. POSITION in SIGNAL menu.  Press
the % button to move the image to left.  Press the $
button to move...

EN – 20
Advanced features for presentation
Expand
By pressing the EXPAND button on the remote con-
trol, you can magnify the detailed image of the picture.
You can also view the screen displaying the picture as
its original size (native resolution display).
Setting the Expand mode
1. Press the MENU button.
2. Press the $ or % to select the FEATURE menu.
3. Press the ENTER button.
4. Press the  { or } button to select EXPAND MODE
or FRAME POSI.
5. Press the $ or % to set the EXPAND MODE or
FRAME POSI.
6....