Mitsubishi S250 Projector User Manual

							EN Ð 21
ENGLISH
Advanced features for presentation
Expand
By pressing the EXPAND button on the remote con-
trol, you can view the detailed image of the picture.
You can also view the screen diplaying the picture as
its original size (real screen display) by pressing the
button again.
Using the Expand mode
1. Press the EXPAND button.
¥ You can magnify different areas of the active pic-
ture by pressing the {, }, $ or % button.
¥ You can change the magnification of the zoomed area
by pressing the + or - button.
2. Press the EXPAND button on the remote control
again.
The real screen display will appear on the screen.
3. Press the COMPUTER or VIDEO button.
The normal screen display will appear on the screen.
¥ Display enlargement does not work with
video input or S-video input.
¥ In EXPAND mode or REAL mode, pressing the
COMPUTER or VIDEO button will switch to the
normal screen display .
The normal screen display will appear on the screen.
¥ In EXPAND mode, you cannot adjust the zoom/fo-
cus and the volume.
¥ When displaying the images through VIDEO IN
terminal or the video images through COM-
PUTER IN terminal, expanded image display is
not available. Only real screen display is avail-
able.
¥ During expand mode, the PinP mode is not avail-
able.
REAL screen display
¥ During REAL mode, Press the $ or % buttons
for fine adjustment. the  { and } buttons are
not working at this time.
¥ The expanding rate cannot be changed by
pressing either the + or - button. They are
working for volume adjustment.
Still
How to stop the picture temporarily (still picture).
1. Press the STILL button on the remote control.
The picture will stop temporary.
To resume picture activity.
2. Press the STILL button on the remote control
again.
PinP (Picture in Picture)
One of the special features of this unit is the picture-
in-picture (PinP) mode. PinP allows you to view differ-
ent sources at the same time.
1. Press the PinP button on the remote control.
The sub image will appear.
¥ Pressing the PinP button repeatedly will select
on and off.
¥ You can change the position of the sub image by
pressing the {, }, $ or % button.
¥ You can change the size of the sub image by
pressing the + or - button.
2. If necessary, select the desired external input source
of the sub image by using the VIDEO button.
¥ You can change the external input source of the
main image by using the COMPUTER button.
3. Press the PinP button on the remote control again.
The sub image will be disappeared.
¥ During PinP mode, the audio selected in PinP
AUDIO of the AUDIO menu is outputted.
¥ During PinP mode, you cannot adjust the zoom/focus
and the volume.
¥ Adjusting contrast, brightness, tint or color isnt
available during PinP mode.
¥ When connecting DVD player or MUSE decoder
etc. to COMPUTER IN terminal, PinP are not
available.
¥ During PinP mode, the expand mode is not avail-
able.
Main image
(From COMPUTER IN)
Sub image
(From VIDEO IN) 
						

							EN Ð 22
Mouse remote control
By connecting to personal computer through the USB, PS/2 or ADB port, you can operate your computer with the
projector remote control.
Connection
Projector + PC with USB connector
Operation
Projector + Macintosh
¥ Turn off personal computer and the projector before connecting with PS/2 port or ADB port. If connecting the
personal computer with the projector when the personal computer is on, the remote control does not work as a
mouse. In that case, restart the personal computer. ¥ You can use the mouse remote control function with computer supported USB only. If your system is Win-
dows
¨ 98 or higher, your computer supported USB in standard. If your system is Windows¨ 95 or lower,
please contact your dealer. If your computer is Macintosh with USB port, you can use this function.
Projector + IBM PC or IBM PC compatibles
to RS-232C
terminal
MAC adaptor for 
MOUSE (optional)to ADB port
D-SUB 9P D-SUB 9P Mini DIN 4P D-SUB 9P
RS-232C cable
ENTER
RIGHT CLICKLASER
COMPUTERVIDEOZOOM/
FOCUS
MUTE
VOLME
AUTO
POSITION
MENU
right clickThis operates in the same way as the right 
button on the computer mouse. 
mouse pointerUse to move the cursor on the image, 
instead of the computer mouse.
left clickThis operates in the same 
way as the left button on 
the computer mouse. 
to USB
to USB port
USB cable (optional)
USB 4P
 (type B) USB 4P
 (type A)
to RS-232C
terminal
PS/2 adaptor to mouse 
(PS/2) port
D-SUB 9P D-SUB 9P D-SUB 9P Mini DIN 6P
RS-232C cable
Advanced features for presentation (continued) 
						

							EN Ð 23
ENGLISH
The lamp is designed to project the image on the LCD
panels. When the lamp no longer functions, replace it
with a new one.
Caution:
¥ Do not remove the lamp immediately after using
the projector, you may get burned because of the
high temperature of the lamp.
¥ When you replace the lamp, press the power button
to power off, then wait for 120 seconds in stand-by
mode to allow the lamp and LCD panels to cool. Turn
off  the main switch,  unplug the power cord from
the outlet, and wait one hour so that the lamp is
cooled to the touch.
¥ Do not remove the lamp except for replacement.
Careless treatment can cause injury or fire.
¥ Do not touch the lamp element directly. It may break
and cause you to injure or burn yourself.
¥ Be sure not to drop the lamp lid screw into the pro-
jector. Also be sure not to insert metal or any flam-
mable objects, it may cause fire or electric shock. If
any objects are inserted, please unplug and contact
your dealer.
¥ Install the lamp securely, failure may cause a fire.
1. Reverse the projector gently.
2. Loosen the screws of the
lamp lid on the top cover
using a phillips screw-
driver (+) , and remove
the lid.
¥ Remove the lamp cover
in the direction of the arrow as
indicated.
3. Pull up the handle.
4. Loosen screws (a) using a phillips
screwdriver (+), and remove them.
5. Hold onto the projector by the handle as
you pull out the lamp.
Once the lamp has been removed, do not
spill liquid on it, place it near flammable
objects or where children can touch it.
Otherwise, it will cause in-
jury or fire.
6. Insert the new lamp se-
curely into the projector
body in the right direction.
7. Tighten up the screws (a) using a
phillips screwdriver (+).8. Put the handle back to the holding point.
¥ Make sure that the handle is locked.
9. Tighten up the screws of the lamp lid
using a phillips screwdriver (+).
How to reset the operation time meter
Plug in the power cord, switch on the projector, and
reset lamp time by pressing the $, % and POWER
buttons simultaneously.
Important:
¥ If the 3 buttons was not pressed at the same time,
the lamp time may not be reset.
¥ Please confirm the TEMP indicator illuminates
about 2 seconds and the lamp time has been
reset.
¥ The projector will not turn on if you do not secure
the lamp lid.
¥ You must reset the operation time meter after you
replace the lamp.
¥ Do not reset the operation time meter unless the
lamp has been replaced.
Caution:
¥ Do not spill liquid on the lamp or place it near flam-
mable objects or where children can touch it.  Oth-
erwise, it could cause injury or fire.
¥ Be sure that the projector guide is firmly inserted
between the right and left lamp guides.
The life of the lamp
The average life of the lamp for the projector is about
2,000 hours of consecutive use. Life span may differ
according to operating environment, and may be shorter
than 2,000 hours. Decreases in luminescence and/or
color brightness will indicate that the light source lamp
needs to be replaced. When lamp operation time ex-
ceeds 1,500 hours, the indicator will flash alternately
between green and red (while the lamp is in operation;
when the lamp is not in operation, the indicator will
appear red only).   When the lamp has been used for
about 1,900 hours, the message ÒLAMP!!.Ó will appear
on the screen for one minute. When the lamp has been
used for about 2,000 hours, the projector will automati-
cally shut off for the safety of the lamp and the power
indicator light will be red. The projector cannot be used
until the lamp has been replaced and operation timer
has been reset.
Caution:
¥ The lamp is fragile. If broken, be careful not to cut
yourself with glass fragments.
¥ The lamp life depends on the environment. For re-
placement lamps, please contact your dealer.
The projector automatically shuts off af-
ter about 2,000 hours, and you cannot use
the projector until you replace the lamp.
Screw of the lamp lid
Handle
(a)
(a)
Lamp replacement 
						

							EN Ð 24
Maintenance
Caution:
Be sure to turn off the projector and unplug the power
cord from the wall outlet before you perform any main-
tenance on the projector.
Cleaning the air-filter
This projector has two air-filters, for bottom air-outlet
slots and for front air outlet slots. Clean the air-filter
frequently. If the filter or ventilation slots become clogged
with dirt or dust, the temperature inside the projector
may rise and shut off the power (the TEMP indicator
starts to blink red).
For bottom air outlet slots
1. To remove the filter cover, press the ridged
area gently, push the cover in the direction
of the arrow and lift.
2. Remove the air-filter from
the filter cover.
3. Wash the air-filter.
¥ Use water or a mild
detergent diluted with
water to clean the filter.
Rinse the filter thoroughly and let it dry
completely.
4. Attach the filter to the cover.
5. Reinstall the filter cover.
For front air outlet slots
1. To remove the filter cover, press the
two ridged area gently and pull the cover.
2. Remove the dust from the
air-filter by using a vacuum
cleaner.
¥ Do not wash the air-
filter.
3. Reinstall the filter cover.
Important:
¥ If the filter is damaged or becomes extremely
dirty, contact your dealer for replacement.
¥ The power will not turn on if the air-filter cover is
improperly installed.
Caution:
Be sure to use the projector with an air-filter. If not,
dust may get inside the projector, causing a fire or a
breakdown.
Cleaning the projector and the ventilation
slots
Use a soft cloth to clean the projector and the ventila-
tion slots. When the slots become dirty, wipe them with
a soft cloth dampened with a diluted mild detergent,
and then wipe them with a dry cloth.
To protect the surface of the projector from fading or
deteriorating:
¥ Do not spray insecticide on or inside the projector.
¥ Do not use benzine or thinner to clean it.
¥ Do not let rubber or plastic materials come into
contact with the projector.
Cleaning  the lens
Use a standard lens-cleaning brush or a piece of lens
tissue dampened with lens cleaning fluid. The lens sur-
face is fragile. Use only recommended, nonabrasive
lens-cleaning materials. Do not touch the lens with your
fingers.
Filter
Filter cover
Filter cover
(For front air outlet slots) 
Filter cover
(For bottom air 
outlet slots) 
Air-filterFilter cover 
						

							EN Ð 25
ENGLISH
Troubleshooting
The following offers solutions to some of the common problems you may encounter. We suggest that you consult
this chart before contacting your dealer.
CAUSE
¥ The air inlet slots, outlet slots  or air filter is
clogged with dust or some objects.
POWER indicator does not light up.
¥ Power cord is unplugged from the outlet.
¥ Power cord is disconnected from the projector.
¥ The main switch is turned off.
¥ The lamp lid is open.
POWER indicator blinks red.
¥ The projector has been turned on again too soon
after having been turned off.
¥ When the power switch was turned off while
the fan was running, during or after lamp
operation.
¥ The room temperature is too high.
(Does the LAMP indicator show an unusual
condition?)
¥Lamp is no longer working.
POWER indicator blinks between red and green.
¥ The filter cover is not closed.
¥ When the LAMP indicator or the TEMP
indicator is either on or blinking, the main unit
requires repairs.
¥Lens is covered by lens cap.
¥ When the LAMP indicator or the TEMP
indicator is either on or blinking, the main unit
requires repairs.
¥The equipment connected to this projector is not
turned on.
¥Hookup is not made correctly with other equipment.
¥The input source is not selected correctly.
¥ The air inlet slots, outlet slots  or air filter is
clogged with dust or some objects.
(In this case, the TEMP indicator does not light up.)
¥The projector is not at a right angle to the screen.
¥Brightness, tint and color are not adjusted correctly.
¥The projecting distance is beyond the focused area.¥Lens is dirty.
¥Screen size exceeds screen size specifications.¥Brightness and contrast are not adjusted correctly.
¥FINE adjustment is not made correctly.
¥ Tracking is not adjusted.
¥The projector is not at a right angle to the screen.¥Remove the object.
¥Plug the power cord into the outlet.
¥ Insert the power cord into the projector.
¥Turn the main switch on.
¥ Close the lamp lid.
¥
Wait for the lighting sequence.
¥ Turn the power switch on and off several times.
¥Refer to Indicators on page 26.
¥Replace the lamp with a new one.
¥Close the cover correctly.
¥Contact your dealer.
¥Take the lens cap off.
¥Replace the lamp with a new one.
¥Turn on the connected equipment.
¥ Confirm the hookup.
¥Select the correct source according to the equip-
ment connected to this projector.
¥Remove the object and turn off the main power
switch. After about 10 minutes, Turn the pro-
jector on.
¥Adjust the angle of the projector to make a right
angle to the screen. See page 12.
¥Adjust brightness, tint and color correctly.
¥Adjust the projecting distance. See page 9.
¥Clean lens.
¥
Reduce screen size to within 40 to 300.
¥Adjust brightness, contrast.
¥Make FINE adjustment.
¥ Adjust tracking.
¥Adjust the angle of the projector to make a
right angle to the screen. See page 12.
¥When  you see the stationary image for a long time, it may remain on the screen if you change the
image. It is not a breakdown. The blurred image will disappear in a few minutes.
¥It is normal.
¥The cable for connection with other equipment
is not plugged securely into the terminal.
¥The projector is installed too close to other
equipment.
¥Volume is not turned up.
¥Connection to other equipment is not made correctly.
¥The PC monitor is not turned on.
¥This is typical of the LCD projector.
¥The operation is incorrectly made due to noise or
interference.¥Plug the connecting cable securely into the
terminal. See pages 10-11.
¥Install the projector far away from other equipment.
¥Turn up the volume.
¥ Check connections.  See pages 10-11.
¥Turn on the monitor.
¥Press the reset button on the Terminal board.
See page 15.
POSSIBLE SOLUTIONSPROBLEMS
The power is off.
No picture appears
on the screen.
The image is
turned off.
The image is
distorted.
The image is dark.
The image is
blurred.
Red, blue or green dots are
viewed on the text of image.
The image remains
blurred.
The image is dis-
torted on the screen
and noise is heard.
No sound is heard.
Adjustments cannot be
made. Warm air comes out of
the exhaust vents.
Nothing is displayed on
the PC monitor. 
						

							EN Ð 26
Indicators
The projector has three indicators each of which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your
dealer.
POWER indicator
LAMP indicator
TEMP indicator
LAMP
VOLUMEZOOM/
FOCUSTEMP
VIDEO
ENTER COMPUTER
MUTE
AUTO
POSITION
MENU
Normal condition
Abnormal condition
Steady 
red
Steady 
green
Steady 
greenBlinking
green
Steady 
green
POWER LAMP TEMPCONDITION Notes
The POWER is ON. (Normal condition) Lamp stand-by (about for 1 minute) The power button cannot be used to switch
ON and OFF Stand-by
Off Off
Off
Off
Steady 
greenBlinking
green/red
Blinking
green/red
Blinking
green/red
Steady 
red
Steady 
greenSteady 
greenBlinking
red
Steady 
red
POWER LAMP TEMPCONDITION POSSIBLE SOLUTIONS
Lamp duration warning. (Lightning duration total 
about 1, 500 hours.When the POWER is ON.)
Steady 
redBlinking
redLamp duration warning. (Lightning duration total 
about 1, 500 hours.When the POWER is OFF.)
Steady 
redLamp duration warning. (Lightning duration total 
about 2,000 hours.)
The lamp or filter cover is not closed.  Close the cover correctly.
or or
BlinkingBlinking
Abnormal. Contact your dealer.
Off
Off
Off
Off
Off
Off
Steady 
red
Steady Steady 
Unusual temperature
• The ventilation slits or air filter is clogged with 
dust or debris.
• The fan has stopped due to an impediment.
• The room temperature is too high.
• The filter is dirty.• Remove the object from the ventilation
slits.
•
Pull out the power plug andremove the
object. If you cannot, consult your dealer.
• Relocate the projector to a cooler place.
• Clean the filter.
Replace the lamp.
Exchange with a new lamp if the same 
problem recurs. 
						

							EN Ð 27
ENGLISH
Specifications
LCD projector
LVP-X250U | LVP-S250U
AC100 ~ 240V,  50 / 60Hz
2.9 A
LVP-X250U LVP-S250U
1.3-inch LCD panel: 3 pieces (for R, G, B) 1.3-inch LCD panel: 3 pieces (for R, G, B)
Pixels 1,024 ´   768 = 786,432 pixels Pixels 800 ´   600 = 480,000 pixels
Total 2,359,296 pixels Total 1,440,000 pixels
Active pixel rate: 99.99 % or more (each panel) Active pixel rate: 99.99 % or more (each panel)
16,770,000 colors
F 1.8~2.2    f = 52 ~ 66 mm
190 W NSH
40 ~ 300 inch (aspect ratio 4:3)
Resolution : 640 x 400 - 1024 x 768 + Compressed 1280 x 1024 (LVP-X250U)
Resolution : 640 x 400 - 800 x 600 + Compressed 1024 x 768 (LVP-S250U)
Sync on Green available
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60
DVD (Component) / HDTV (1080i)
2 W  stereo
6 cm square type (8W 2W) ´ 2
Luminance signal: 1.0 Vp-p 75W    (negative sync.)
Chroma signal: 0.286 Vp-p 75W  (burst signal)
1.0 Vp-p  75W   (negative sync.)
350 mVrms,  10kW or more
RGB: 0.7Vp-p  75W (negative sync.)
YC
BCR: Y:1.0Vp-p (negative sync.) CBCR:0.7Vp-p
HD/CS : TTL level (positive or negative)
VD : TTL level (positive or negative)
350 mVrms,  10kW or more ¿3.5mm stereo mini jack
Serial (D-SUB 9 pin female connector) RS-232C standards
PS/2 (Mouse function), USB terminal for Mouse, Wired remote terminal
299 ´ 127  ´ 367 mm
 (width ´    height ´    depth)
Approx.  6.0kg
114 inch (2.9m)
+41°F (+5°C) ~ +104°F (+40°C),  30~90%
Type
Model
Rated power supply
Rated input
LCD panels
Colors
Projection lens
Light source lamp
Picture size
PC compatibility
Video compatibility
Audio output
Speaker
S-video input
Video input
Audio inputs
Analog RGB input
     (mini D-SUB 15P)
PC audio input
Control connector
Outside dimensions
Weight
Length of power cord
Temperature, humidity
(performance guarantee)
Legs and lens are not included.
Kensington Lock
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the Kensington System for instructions on how to use it to
secure the projector. Please contact to Kensington Technology Group as shown below.
Kensington Technology Group
2855 Campus Drive
San Mateo, CA 94403, U.S.A.
Phone : (650)572-2700 Fax : (650)572-9675 
						

							EN Ð 28
1 Remote control 939P790-40
1 Remote control cable 246C217-30
1 UserÕs manual 871D293-30
1 Quick reference card 857B017-10
2 Battery for remote Ð
Connectors
PC analog RGB input
Use to input video signals (analog
RGB) of a personal computer.
(Pin assignment of Mini D-SUB 15P jack)
PIN NO. SPEC PIN NO. SPEC
1 R(RED)/CR9Ð
2G(GREEN)/Y10 GROUND
3B(BLUE)/CB11 GROUND
4 GROUND 12 Ð
5 GROUND 13 HD/CS
6 GROUND 14 VD
7 GROUND 15 Ð
8 GROUND
15
1115
RS-232C input
Use to control the projector with the
personal computer, or control the
personal computer with remote
control. 
Please use RS-232C crossover
cable provided.
PIN NO. NAME I/O
1 DCD / CLOCK IN
2 RXD IN
3 TXD OUT
4 N.C. Ð
5 GND Ð
6 DTR IN
7 CTS / 5V IN / OUT
8 RTS IN
9 RI / DATA OUT
1
695
Dimensional drawings
(mm)
247
29951.5
21
330 92 98.5
16
75
12781.5367
Replacement part
(Option / Not included in the box)
Spare marcury lamp 499B021-10
(VLT-X300LP)
    WhatÕs included in the box
2   AC power cable 246C383-10
246C383-20
1 AV (Audio/Video) cable 246C381-10
1 RGB cable for PC 246C382-10
1 RS-232C cable 246C320-20
1 PS/2 adapter 246C367-10
Specifications (continued)