Mitsubishi Projector Xd205r User Manual
Here you can view all the pages of manual Mitsubishi Projector Xd205r User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
DATA PROJECTOR MODEL XD205U/XD205U-G/XD205R SD205U/SD205R User Manual This User Manual is important to you. Please read it before using your projector. EN ENGLISH
Page 2
EN-2The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu- lated dangerous voltage within the product’s enclosure that may be of suffcient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING Use the attached...
Page 3
EN-3 ENGLISH Contents Important safeguards................................................................................................................................ 4 Overview ................................................................................................................................................... 6 Remote control ......................................................................................................................................... 8 Installation...
Page 4
EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions The safety and operating instructions should be retained for future reference. 3. Warnings All warnings on the appliance and in the operating instructions should be adhered to....
Page 5
EN-5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It may cause fire or electric shock. In this case, unplug immediately and contact your dealer. Never remove the cabinet. This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in User Manual, do not attempt to service this product by yourself. Please...
Page 6
EN-6 Overview 1FOCUS ring 2ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote control sensor (Front) 6 Air inlet grille 7 Air inlet grille 8 Terminal board 9 Kensington Security Lock Standard connector 10 Air inlet grille 11 Speaker 12 Adjustment feet (front) 13 Adjustment feet (rear) 14 Hook for banding Control panel 1 Power button 2 AUTO POSITION / S button 3 COMPUTER / W button 4 MENU button 5 STATUS indicator 6 POWER indicator 7 KEYSTONE/ENTER button 8 VIDEO/ X button 9T button Important: While...
Page 7
EN-7 ENGLISH Bottom side 1 Lamp cover 2 Adjustment feet (rear) 3 Adjustment feet (front) Caution:Do not replace the lamp immediately after using the pro- jector because the lamp would be extremely hot and it may cause burns. Remote control 1ON button 2 STILL button 3 AUTO POSITION button 4ENTER button 5 MENU button 6 KEYSTONE button 7 +, - (VOLUME) buttons 8 VIDEO 1, 2 button 9 COMPUTER button 10 16 : 9 button 11 Direction buttons 12 PAGE UP / DOWN button 13 OFF button 14 MUTE button (Audio/Video) The...
Page 8
EN-8 Remote control Battery installationUse two AAA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). Load the batteries from - spring side, and make sure to set them tightly. 3. Replace the back cover. Caution: Use of a battery of wrong type may cause explosion. Only Carbon-Zinc or Alkaline-Manganese Dioxide type batteries...
Page 9
EN-9 ENGLISH Installation Layout of the projectorImage size varies depending on the distance between the screen and the projector. Front projection The above figures are approximate and may be slightly different from the actual measurements. Front projection, ceiling mountingFor ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installation. For details, consult your dealer. The warranty on this projector does not cover any damage caused by use of...
Page 10
EN-10 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors. Important: Make sure that the connected device is turned off before starting connection. Plug in the power cords of the projector and the connected devices firmly. When unplugging, hold and pull the plug. Do not pull the cord. When the projector and the connected devices are located too close to each other, the...