Home > Mitsubishi > Projector > Mitsubishi Lvp X30u Projector User Manual

Mitsubishi Lvp X30u Projector User Manual

Here you can view all the pages of manual Mitsubishi Lvp X30u Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 11

E – 9
ENGLISH
Screen size Projection distance Dimension (H)
inches m / feet cm / inch
36 1.2 / 3.93 9.9 / 3.90
60 2.0 / 6.56 16.9 / 6.65
80 2.7 / 8.85 22.5 / 8.86100 3.4 / 11.1528.1 /11.06
120 4.1 / 13.45 33.7 / 13.27
150 5.1 / 16.73 42.2 / 16.61
200 6.8 / 22.30 56.2 / 22.13
Installation
The distance from the unit lens to the screen determines to the size of the projected image, therefore, you need to consider the place where you
set up the unit and screen before making connections. You also need to...

Page 12

E – 10
AUDIOMOUSE RGB / YCbCrVIDEO S-VIDEO
AUDIOMOUSE RGB / YCbCrVIDEO S-VIDEO
Connecting video equipment
You can connect up to two pieces of video equipment to the unit following the illustrations below.
• You can switch the input source (picture) to VIDEO or S-VIDEO when you connect two pieces of equipment.
(The S-VIDEO connection provides more vivid color and higher resolution compared to the VIDEO connection.)
• You can output the sound of only one component through the unit speaker even when two...

Page 13

E – 11
ENGLISH
AUDIOMOUSERGB / YCbCrVIDEO S-VIDEO
Connecting Video Equipment With Component Video Signal (YCbCr) Output
• Video equipment with component video signal (YCbCr) output can be connected to this projector by setting the RGB/YCbCr connector to
YCbCr (see page 27) from the menu.
Connection to the RGB/YCbCr connector
To audio out jack
Audio adaptor (accessory)
Audio cable (accessory)DVD player
To component video (YCbCr) OUT jack
Component cable (YCbCr cable: option)
Jacks: RCA × 3 mini D-Sub...

Page 14

E – 12
AUDIOMOUSERGB / YCbCrVIDEO S-VIDEO
Connecting a PC or Macintosh
This projector can be used as a display for numerous applications by connecting the analog RGB output connector of a PC to the RGB/YCbCr
jack of this projector and setting the RGB/YCbCr connector to RGB (see page 27).
• Either read the instruction manual or contact the manufacturer concerning the method used to set your PC.
IBM PC/AT compatible
Macintosh mini D-sub 15-pin monitor output
connector.
To headphone jack
Audio cable...

Page 15

E – 13
ENGLISH
Changing the computer’s video
resolutions
Depending on your computers graphics capability, you may be
able to select one of several resolutions. Generally a computer-
either a PC or Macintosh- with 1 MB VRAM will generally run:
640 × 480 at 16.7 million colors (24 bit true color)
800 × 600 at 65,000 colors.
1024 × 768 at 256 colors.
As the resolution increases,  the number of colors you can run
decreases.  With 2 MB VRAM a computer will generally run:
640 × 480 at 16.7 million colors (24...

Page 16

E – 14
Using the unit
Operation
Before Using
Open the sliding lens cap.
1Connect the power cord.
The POWER indicator will light amber, the ex-
haust fan will operate at slow speed and the
standby status will be activated.
RGB / YCbCrS VIDEO
VIDEO MOUSE
AUDIO
A
U
TO
S
O
U
RCE
PO
W
E
RPOWER
STATUS
POWERSTATUPOWERSO
2Press POWER on the remote control, or
POWER on top of the unit, to turn on the
unit.
The POWER indicator on top of the unit turns to
green and starts flashing.
It takes one minute for the unit...

Page 17

E – 15
ENGLISH
Adjuster Adjustment
There are two adjusters: one on the right side of the back panel
and another in the front center of the main unit.
1Use right hands to lift the front of the main unit to approxi-
mately the desired adjustment angle.
2Press the adjuster button on the front.
Loosen the adjuster legs and allow them to drop into
position.
3Release the button.
The extended adjuster legs will be locked.
4Rotate the contact surfaces of the rear adjuster either clock-
wise or counterclockwise...

Page 18

E – 16
Using the Remote Control
(Input Selection)
Operating from the main unit
Inputs can be selected not only by operating the remote
control but also by using the main unit SOURCE button.
POWER STATUSPOWERSOURCEAUTO
1Press the VIDEO button.
The video signal (VIDEO, S-VIDEO) connected
to the input jack of this device will be detected
and projected automatically. If a video signal is
not detected, the message NO SIGNAL will be
displayed.
VIDEO
2Press the RGB button.
The analog RGB signal connected to the...

Page 19

E – 17
ENGLISH
AUDIO MOUSE RGB / YCbCrVIDEO S-VIDEO
The remote control of this projector can be used as the PC mouse (wireless mouse function) by connecting the MOUSE connector of this
projector and the PC.
Remote control mouse functions
• The cursor key on the remote control operates the computer mouse functions.
• If a computer running Windows is connected, the ENTER button on the remote control operates
as the computer mouse left click button and the CANCEL button as the computer mouse right
click...

Page 20

E – 18
Various functions while using the unit
AUTO button FREEZE button
MUTE button
VOLUME +/– button
Automatic Screen Adjustment
Press the AUTO button.
AUTO
The position and size of the input image will be
adjusted automatically in accordance with the
resolution.
Note
Operation is the same as with the AUTO button of the main unit.
Freezing animated images
You can capture the desired frame of a moving picture.
Press FREEZE button.
A still image of the current frame is displayed. To
restore the present...
Start reading Mitsubishi Lvp X30u Projector User Manual

Related Manuals for Mitsubishi Lvp X30u Projector User Manual

All Mitsubishi manuals