Mitsubishi Ldt651p Users Manual

English-7
English
64.5" LCD Display MonitorMODEL
Before use
- Please be sure to read the “Safety Precautions.” They are important to use this LCD display monitor. 
- Please check the content of the package. This document contains instructions for World Wide model and Japan model, but 
their accessories are different. 
Contents
 Power Cord
For EU Video Signal Cable
(Mini D-SUB 15-pin to 
Mini D-SUB 15-pin Cable)
 Clamper x 2
(For securing the cables)
 Label to cover the UL 
certifi cation marking...

English-8
5 INPUT button
Displays the OSD menu to switch the video input. 
You can select [RGB1], [RGB2], [RGB3], [RGB4], [RGB5], [RGB6], 
[DVD/HD], [VIDEO], or [VIDEO] using the UP (
) or DOWN 
(
) button.
6  PLUS (+) button
Acts as (+) button to increase the adjustment in the OSD menu. 
Increases the audio output level when the OSD menu is off.
7  MINUS (-) button
Acts as (-) button to decrease the adjustment in the OSD menu. 
Decreases the audio output level when the OSD menu is off.
8 UP () button...

English-9
English
1  AC IN (3-pin, with earth terminal)
Connects with the supplied power cord.
2  EXTERNAL SPEAKER TERMINAL
Connects with the special stereo speakers (option).
3 LAN connector
Connects with a L AN cord.
4  RS-232C connector (D-SUB 9-pin)
IN connector:
Connects with the RS-232C OUT connector of a computer or 
other connected MDT651S.
OUT connector:
Connects with the RS-232C IN connector of other connected 
MDT651S.
5 AUDIO IN
Connects with the audio output connector of external 
equipment...

English-10
1 POWER button
Switches the power on/off.
*  When the Power indicator is not glowing, no controls will 
work.
2 INPUT buttons
Select the input signal from [RGB1] (HDMI), [RGB2] (DVI-D), 
[RGB3] (D-SUB), [RGB4] (BNC), [RGB5] (CAT5), [RGB6] 
(DISPL AY PORT ), [DVD/HD] (YPbPr), [VIDEO], and [VIDEO]. 
3  PICTURE MODE button
Selects the picture mode from [HIGHBRIGHT], [STANDARD], 
[sRGB], and [CINEMA]. See page 32.
  HIGHBRIGHT:  The brightness is maximized.
  STANDARD:  Factory default setting....

English-11
English
O p e r a t i n g R a n g e o f t h e W i r e l e s s R e m ot e 
Control
Point the wireless remote control toward the LCD monitor’s 
remote control sensor during button operation.
Use the wireless remote control within a distance of about 7 m 
from the front of the LCD monitor’s remote control sensor and 
at a horizontal and vertical angle of within 30° within a distance 
of about 3.5 m.
CAUTION: 
The remote control system may not function when direct 
sunlight or strong illumination...

English-12
Parts Name and Functions (continued)
CAT5 Tx BOX
1  USB (B type)
Connector for receiving the power supplied from the USB 
device such as the computer. By connecting a USB cable, you 
can control the CAT5 Tx BOX using the control commands 
transmitted over the USB cable.
CAUTION:
We have checked that the power is supplied and the control 
commands are transmitted properly via the USB connector 
by connecting it with our computers according to the USB 
standards.
When the CAT5 Tx BOX is combined...

English-13
English
Flow of preparation
P-1Preparation for installation
- Determine the installation location
- Ventilation requirements for enclosure mounting Page 14
Carry out as necessary
P-2
P-3
P-5
P- 6
P-7 P- 4
P-8
Carry out as necessary
Carry out as necessary
Carry out as necessary
Carry out as necessary
Installing the optional speakers
Connecting CAT5
- CAT5 for long-distance connection or multiple-monitor connection
Connecting RS-232C
- Monitor control via RS-232C
Connecting LAN
- Monitor...

English-14
 P-1   Preparation for installation
Ventilation requirements for enclosure mounting
To allow heat to disperse, leave space around the monitor as 
shown in the fi gure below.
CAUTION:
Don’t block the holes in the rear of the monitor shown in the 
fi gure above. If they are blocked, heat accumulates inside the 
monitor, causing breakdown. The upper limit of the operation-
guaranteed ambient temperature when the monitor is installed 
in the landscape position is 40˚C. When installing the monitor...

English-15
English
(a): Screws for bezel
 P-2   Installing the monitor  Carry out as necessary
Using the wall mount or ceiling mount
Lay the screen face down
Lay the protective sheet on a table, which was wrapped around 
the monitor when it was packaged, beneath the screen surface 
so as not to scratch the screen surface.
Failure to follow the correct mounting procedures can result 
in damage to the equipment or injury to the user or installer. 
Product warranty does not cover damage caused by improper...

English-16
 P-2   Installing the monitor (continued)  Carry out as necessary 
Installing in the portrait position
Conditions:
MDT651S can be installed in the portrait position, under the 
following conditions:
CAUTION:
Portrait position is available only when the monitor is wall-
mounted or ceiling-mounted.
Operation Environment (Temperature) shall be limited, as 
shown below:
Operation Environment:
Temperature  5 - 35°C / 41 - 95°F
Humidity 20 - 80% (without condensation)
Place the monitor in the...