Mitsubishi Hc900e Projector User Manual
Here you can view all the pages of manual Mitsubishi Hc900e Projector User Manual. The Mitsubishi manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
EN-21 ENGLISH IMAGE CONTRAST 0 - 60BRIGHTNESS± 30 sRGB ON , OFFCineRichColor AUTO, 0 - 10 9300K6500K5900KUSER COLOR TEMP. COLOR 0 - 20TINT± 10SHARPNESS 0 - 10GAMMA MODE AUTO, STANDARD, THEATER1, THEATER2CONTRAST R 0 - 60 CONTRAST B 0 - 60BRIGHTNESS R± 30BRIGHTNESS B± 30 INSTALLATION OFF, MIRROR, INVERT, MIRROR INVERT KEYSTONE ± 20AUTO POWER ON ON , OFF RESET ALL OK AUTO POWER OFFON , OFF FEATURE MENU POSITION 1 (Upper left), 2(Lower right) IMAGE REVERSE SPLASH SCREENBLUE, BLACKBACK COLORSTANDARD,...
Page 22
EN-22 CONTRASTIMAGE0BRIGHTNESS 0 6200K 0COLOR AUTO0 SVGA60 OFF AUTO TINT0SHARPNESS COLOR TEMP. GAMMA MODE sRGB CineRichColor opt. IMAGE REVERSE OFF AUTO POWER ONOFFAUTO POWER OFF KEYSTONE ON INSTALLATION ONBACK COLOR OFF BLUE SVGA60 SPLASH SCREEN 0 opt. STANDARD LAMP MODE FEATURE AUTO SVGA60 AUTO AUTO opt. MENU POSITION CINEMA MODE VIDEO SIGNAL? ASPECT RESET ALLEnglish LANGUAGEAËOK MENU ACCESS PASSWORD FUNCTION 1. R G BR G B SIGNALHORIZ. POSITION 0 VERT. POSITION 0 TRACKING 0 COMPUTER INPUTRGB SET UP...
Page 23
EN-23 ENGLISH 3. FEATURE menu ITEM SETTING FUNCTION MENU POSITION2 positions Use to change the position of the menu. CINEMA MODE AUTOThe film mode will be automatically activated when a film source signal is inputted. OFF The film mode will not be activated. VIDEO SIGNAL 8 positionsWhen AUTO is selected, the appropriate video format is automatically selected depending on the input signal. If the image isn’t displayed correctly, select the desired video format manually. ASPECT AUTO Select to change the...
Page 24
EN-24
Adjusting projected images
To adjust the brightness (CONTRAST and BRIGHTNESS):
You can make adjustments for the brightness of the projected image using the menu.
(See Page 21 for menu setting.)
1. Display the IMAGE menu.
2. Select CONTRAST or BRIGHTNESS by pressing the { or } button.
3. Adjust the selected item by pressing the $ or % button.
To cancel the menu:
4. Press the MENU button.
CONTRAST
Select to adjust the contrast of the image. Every time the % button is pressed, the image becomes...
Page 25
EN-25
ENGLISH
To adjust the tone of white (COLOR TEMP.):
You can select a preset color temperature (white tone) using the menu.
(See Page 21 for menu setting.)
1. Display the IMAGE menu.
2. Select COLOR TEMP. by pressing the { or } button.
3. Select your desired color temperature by pressing the { or } button.
To cancel the menu:
4. Press the MENU button.
To adjust the tone of white (To customize the color temperature):
To customize (and store) the color temperature to your preference, carry out the...
Page 26
EN-26 This projector automatically and properly projects video signals supplied from the computer. However, some video signals may not be projected, depending on the type of the computer. In such a case, press the AUTO POSITION button on the projector or the AUTO button on the remote control. (See Page 20.) When the signal is still not projected properly, adjust the projected image using the SIGNAL menu. How to adjust the image supplied from the computer using the menu: Carry out the following procedures...
Page 27
EN-27 ENGLISH MENU ACCESS SVGA60opt. LOCK UNLOCKOK OK PASSWORD CONFIRM O K CANCEL MENU ACCESS SVGA60opt. LOCK UNLOCKOK OK PASSWORD O K CANCEL Password function This projector is equipped with the password func- tion that is designed for prevention of theft and wrong operation by children and restriction on operation by other than specified users. The pass- word function has three modes as follows. MENU ACCESS ............ All the buttons except for the POWER button on the projector are disabled. (The...
Page 28
EN-28 Installation other device’s remote commands You can install other device’s remote commands in the remote control of this projector. How to install 1. Set the SELECT switch of the remote control of this projector to DVD or VIDEO, depending on the device you use. 2. Place the remote control of this projector and that of the other device with their transmission windows 2-5 cm apart. 2 - 5cm Advanced features (continued) 3. Press the MEMORY button. •The MEMORY button will blink red. •To cancel the...
Page 29
EN-29 ENGLISH 61 245 310 100 5 COMPONENT VIDEO IN Asking for installation To view images projected by the ceiling- mounted projector from the front: When the projector is installed on the ceiling, the special ceiling mount bracket, which is separately sold, is required. Be sure to ask a certified installa- tion specialist for installation of the projector. Con- tact your dealer for details. •Mitsubishi assumes no responsibilities for any damage caused by use of other manufacturer’s ceiling bracket and by...
Page 30
EN-30 Replacing the lamp This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector. Contact your dealer for purchase of the lamp. WARNING: •Be careful not to drop the lamp fixing screws into the inside of the projector. Don’t put a metal piece or flam- mable...