Mitsubishi Hc8000d Bl Projector User Manual

EN-31
IMAGE menu (continued)
ITEMSETTINGFUNCTION
ADVANCED MENUOK  The ADVANCED MENU is displayed for the following settings.
SCREEN SIZE2 optionsSelect according to the screen size.
VERTICAL LOCATION±26Use to adjust the position (height) of the projected image.
CW SPEED4x / 6xSelect the color wheel speed. 6x is effective only when a 1080p 24 
signal is input.
FRAME RATE CONVERSIONOFFA 96Hz driver provides four times in the input of 24P, realizing a speed of film. This mode is suitable for playing games...

EN-32
INSTALLATION menu
IMAGE
REVERSE
OFF OFF
BACK COLOROFF
LOW
LAMP MODEAUTO POWER
ON
AUTO POWER
OFF
INST ALLA TION
TRIGGER1(POWER)
OFF
TRIGGER2(ANAMO)OFF
ONON
BLUE
SPLASH
SCREEN
TEST PAT
TERN
CROSS HATCH
KEYSTONE0
opt.
ITEMSETTINGFUNCTION
KEYSTONE±15Use to correct vertical keystone distortion.
LAMP MODESTANDARDSelect this option when you want to view images in a well-lit room.
LOWSelect to moderate the intensity of the lamp. The fan operating sound is\
 
reduced and the lamp lifetime becomes longer....

EN-33
FEATURE menu
AUTO
AUTO AUTO
opt.
MENU POSITION
CINEMA MODEREMOTE POSITION
ASPECT
RESET ALL
English
LANGUAGEAË
OK
DISPLA Y
INPUT
1.
MENU DIMMEROFF
FEA TURE
PASSWORD
FUNCTION
ITEMSETTINGFUNCTION
ASPECTAUTOSelect to change the aspect ratio automatically depending on the input 
signal.
4:3Select to project images with an aspect ratio of 4:3.
16:9Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
ZOOM1Select to enlarge and project images of CinemaScope size.
ZOOM2Select to...

EN-34
SIGNAL menu
R G BR G B
SIGNAL
HORIZ. POSITION0
VE RT. POSITION 0
TRACKING 0
COMPUTER 
INPUT AUTO
FINE SYNC.
0
USER
opt.
OK
ONHOLD
100%
OVER SCAN
SIGNAL
USERCLAMP 
POSITION 1
1
AUTO OFF 0
LPF
VERT
. SYNC
CLAMP WIDTH
opt.
SHUTTER(U)
SHUTTER(L)
SHUTTER(LS)
SHUTTER(RS)
0
0
0
ITEMSETTINGFUNCTION
HORIZ. POSITION0 - 999Use to adjust the horizontal position of the projected image.
VERT. POSITION0 - 999Use to adjust the vertical position of the projected image.
FINE SYNC.0 - 31Use to eliminate flickering or...

EN-35
Menu operation (continued)
INFORMATION menu
INFORMATION
opt.
LAMP TIME(LOW)
INPUT
RESOLUTION
VERTICAL
FREQUENCY
HORIZONT AL
FREQUENCY
SYNC. TYPE 5wire
60.02 KHz 75.04 Hz
1024x768
COMPUTER 0 HRG
HV B
ITEMDESCRIPTION
LAMP TIME(LOW)This item shows a lamp operating time (hour) calculated based on that \
LAMP MODE 
is LOW.
•	 When	the	LAMP	MODE	is	STANDARD,	this	item	shows	a	longer	lamp	operating	
time than the actual time. (See page 42 for the interval of lamp replacement. )
•	 When	the	lamp	operating...

EN-36
To adjust the brightness (CONTRAST and 
BRIGHTNESS):
You can make adjustments for the brightness of the 
projected image using the menu.
(See page 29 for menu setting.)
1. Display the IMAGE menu.
2. Select CONTRAST or BRIGHTNESS by pressing 
the p or q button.
3. Adjust the selected item by pressing the t or u 
button.
To cancel the menu:
4. Press the MENU button.
CONTRAST
Select to adjust the contrast of the image. Every time 
the u button is pressed, the image becomes brighter 
and more defined....

EN-37
To sharpen or soften the projected image (SHARPNESS):
You can adjust the sharpness of the projected image using the menu.
(See page 29 for menu setting.)
1. Display the IMAGE menu.
2. Select SHARPNESS by pressing the p or q button.
3. Adjust the selected item by pressing the t or u button.
To cancel the menu:
4. Press the MENU button. 
To adjust the tone of white (COLOR TEMP.):
You can select a preset color temperature (white tone) using the menu.
(See page 29 for menu setting.)
1. Display the...

EN-38
To optically brighten or darken projected 
images (IRIS): 
IRIS is a function that controls the lamp light by 
opening or closing the iris to optically adjust the 
contrast. This projector is equipped with IRIS1 for 
HC8000D or IRIS for HC7900DW which automatically 
controls the iris according to the images to be 
projected, and IRIS2 for HC8000D only, which 
selectively focuses on the brightness or the contrast.
IRIS1 for HC8000D or IRIS for HC7900DW has four 
modes as follows. 
AUTO 1
When there...

EN-39
Adjusting projected images (continued)
To adjust the ratio of change in brightness (GAMMA MODE):
You can select a preset gamma mode using the menu.
(See page 29 for menu setting.)
1. Display the IMAGE menu.
2. Select GAMMA MODE by pressing the p or q button.
3. Select your desired gamma mode by pressing the t or u button.
To cancel the menu:
4. Press the MENU button.
To adjust the original ratio of change in brightness (To customize the gamma mode):
To customize (and store) the gamma mode to your...

EN-40
This projector automatically and properly projects video signals supplied from the computer. However, some video 
signals may not be projected, depending on the type of the computer. In such a case, press the AUTO POSITION 
button. (See page 24.) When the signal is still not projected properly, adjust the projected image using the SIGNAL 
menu.
How to adjust the image supplied from the computer using the menu:
Carry out the following procedures according to the symptoms.
Wide strips appear. ....