Mitsubishi Hc7000 Projector User Manual

LCD PROJECTOR
This User Manual is important to you.
Please read it before using your projector.
MODEL
HC7000
User Manual
HC7000 

EN-2
The exclamation point within an equilateral triangle is intended to alert the user to the 
presence of important operating and maintenance (servicing) instructions in the literature 
accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK 
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.
The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to...

EN-3
Note: This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information 
for users and Annex IV, and/or to the directive 2006/66/EC Article 20 Information 
for end-users and Annex II.
Declaration of Conformity
Model number:   HC7000
Trade name:   MITSUBISHI ELECTRIC
Responsible party:  Mitsubishi Digital Electronics America, Inc.
  9351 Jeronimo Road, Irvine, CA 92618 U.S.A
Telephone number:  +1-(949) 465-6000
This device complies with Part...

EN-4
Please read all these instructions regarding your 
projector and retain them for future reference. Follow 
all warnings and instructions marked on the projector.
Read instructions
All the safety and operating instructions should be 
read before the appliance is operated.
Retain instructions
The safety and operating instructions should be 
retained for future reference.
Warnings
All warnings on the appliance and in the operating 
instructions should be adhered to.
Instructions
All operating...

EN-5
WARNING:
Unplug immediately if there is something wrong 
with your projector.
Do not operate if smoke, strange noise or odor comes 
out of your projector. It might cause fi re or electric 
shock. In this case, unplug immediately and contact 
your dealer.
Never remove the cabinet.
This projector contains high voltage circuitry. An 
inadvertent contact may result in an electric shock. 
Except as specifi cally explained in the User Manual do 
not attempt to service this product by yourself. Please...

EN-6
23
Checking accessories
The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in 
the package.
Cables
Mini D-SUB 
15-pin
Mini D-SUB 
15-pinD-SUB 
9-pin
D-SUB 
9-pin
RGB cable for PC 
(246C521-10) RS-232C cable 
(246C548-10)
Used for projector control 
by computer. •
„Power supply parts
Power cord (two) 
(246C483-10, 246C383-20)
„
Remote control parts
Remote control 
(290P158-10)R6 (Size-AA) 
battery (two) 
„Others
Lens cap
Clamper
Lamp...

EN-7
Overview
VIDEO IN and S-VIDEO IN terminals
COMPONENT VIDEO IN terminals
COMPUTER IN/COMPONENT VIDEO IN terminal (mini 
D-SUB 15-pin)
HDMI IN-1 terminal (HDMI 19-pin)
HDMI IN-2 terminal (HDMI 19-pin)
SERIAL terminal (D-SUB 9-pin)
Used for projector control by computer. Contact your 
dealer for details.
TRIGGER terminal
Used for the optional electric screen.
Power jack 1 
2 
3 
4 
5 
6 
•
7 
•
8 POWER button
HDMI/COMPUTER/W button
AUTO POSITION/S button
LENS SHIFT button
MENU button
ENTER button
T...

EN-8
Remote control
ON ( I ) button
HDMI2 button
HDMI1 button
COMPONENT button
AV MEMORY buttons
ENTER button
MENU button
CONTRAST button*
BRIGHTNESS button*
GAMMA button*
ZOOM/FOCUS button
LENS SHIFT button
NOISE REDUCTION button*
COLOR button*
SHARPNESS button*
COLOR TEMP. button*
ASPECT button
AUTO IRIS button
S, T, W, X buttons
VIDEO button
S-VIDEO button
COMPUTER button
AUTO POSITION button
OFF (
) button
* :  See below for the picture quality adjusting buttons. 1 
2 
3 
4 
5 
6 
7 
8 
9 
10 
11 
12...

EN-9
30° 30°30° 30°
Operational range of the remote control
Vertical directions (ceiling mount)
Reception angle
Vertical directionsWhen operating the remote control, keep the distance 
from the remote control to the projector via the screen 
within about 5 m (15 feet). The operable range of the 
remote control, however, depends on the characteristics 
of the screen. Operate the remote control 
within a distance of 10 m 
(30 feet) from the projector, 
pointing the IR beam at the 
remote control...

EN-10
Setting up your projector
Setting up the screen
Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the 
projection angle of the projector. (See page 12.)
Install the screen and projector so that the projector’s lens is placed at the same height and horizontal position of 
the screen center.
Do not install the screen where it is exposed to direct sunlight or lighting. Light directly refl ecting on the screen 
makes the projected images...