Mitsubishi Fd630u Projector User Manual

							EN-21
ENGLISH
Menu operation (continued)
Basic operationSeveral settings can be adjusted using the menu.
Example : Auto power off time setting
1. Press the MENU button.
2. Select the DETAIL MENU and press the ENTER button  (or T 
button).
3. Press the W or X button to select INSTALLATION. 
4. Press the ENTER button (or T button).5. Press the S or T button to select AUTO POWER OFF.
6. Press the W or X button to adjust the auto power off time.
7. Exit the menu by pressing the MENU button several times.
Important:  When the button doesn’t function, unplug the power cord from the 
wall outlet. Wait about 10 minutes, plug the power cord in, and try 
again.
 After selecting the items marked with  , press the ENTER but-
ton.
Menu OptionsSet the following options provided in the respective menus.
1. IMAGE menu
 You cannot adjust TINT when the TV50 (PAL, SECAM) signal is inputted.
 You cannot adjust COLOR TEMP. when WALL SCREEN is set to other than OFF.
 When COMPUTER 1 or COMPUTER 2 or HDMI is selected, TINT do not work.
 When COLOR ENHANCER is switched, projected images may be distorted.
 Captions are not displayed while information about the menu, volume setting, or input signal selection is being displayed on the screen.
 The closed caption function displays text information included in the NTSC signal, which is mainly used for TV broadcasting in North America.
 INPUT LEVEL is unavailable when the digital signal is supplied from the YC
BCR/YPBPR terminal of the connected device.
opt.
IMAGE
opt.
INSTALLATION
WALL SCREEN
BEIGE
opt.
INSTALLATION
AUTO POWERON 
AUTO POWER
OFFOFFON
AUTO POWERON 
AUTO POWER
OFFOFF30min
Menu option Setting Feature description
IMAGE ADVANCED menu
COLOR ENHANCERAU TOAutomatically sets an optimal color balance based on the input signal. 
Use this setting for most cases.
PRESENTATION Makes projected images bright and crisp.
STANDARD Makes projected images look natural.
THEATER Makes projected images soft and smooth. Best suited for movies.
USER
 Adjusts the gamma curve, color intensity, or balance. (See page 26.)
CONTRAST±30 Adjusts the contrast of projected images. (See page 26.)
BRIGHTNESS±30 Adjusts the brightness of projected images. (See page 26.)
COLOR TEMP. 4 optionsAdjusts the color temperature. You cannot select this setting when 
WALL SCREEN in the INSTALLATION menu is set to a setting other 
than OFF. (See page 26.)
COLOR±10Adjusts the color tone of projected images. (See page 26.) You cannot 
select this setting when the COMPUTER 1 or COMPUTER 2 or HDMI is 
selected as the input source.
TINT±10Adjusts the color tint of projected images. (See page 26.) You can select 
this setting only when NTSC is selected as the input signal.
SHARPNESS±5 Adjusts the sharpness of projected images. (See page 26.)
ADVANCED MENU OK
 NOISE REDUCTIONON/OFF Reduces noise of projected images when the input signal is noisy.
CTI ON/OFF Corrects smeared color borders.
INPUT LEVEL±5For analog signal input: The input level of video signal differs among 
devices to be connected. High input level causes solid white in displayed 
image and low input level causes displayed image to get dark. Use this 
menu to adjust the input level of analog video signal.
ENHANCED/NORMALFor digital signal input: When a digital signal is input, ENHANCED and
NORMAL are switchable. (See page 12.)
CLOSED CAPTIONOFF Does not display captions.
CC1/CC2 Displays captions.
CONTRAST
BRIGHTNESS0
0
STANDARD
0
COLORCOLOR TEMP.
0
SHARPNESS
AUTOCOLOR
ENHANCER
opt.
IMAGE
0TINT
OKADVANCED MENU
CTI
INPUT LEVEL0 ON
ON NOISE REDUCTION
CLOSED CAPTIONOFF
opt.
IMAGEADVANCED MENU 
						

							EN-22
Menu operation (continued)
2. INSTALLATION menu
 The STANDARD lamp mode is activated by default whenever the projector is turned on. When the LOW LAMP MODE has been chosen, the 
default STANDARD lamp mode is switched to the LOW lamp mode in 1 minute.
 In AUDIO INPUT, HDMI audio is selected when the Input Source is HDMI input. The audio of AUDIO 1, AUDIO 2, AUDIO 3, and MIX   cannot 
be selected.
Menu option Setting Feature description
WA LL  SC R EE NOFF/BEIGE / LIGHT 
BLUE / LIGHT GREEN / PINK /BLACK 
BOARD/WHITE BOARDSelects a desired setting based on the color of the screen or wall 
on which images are projected. (See page 17.) When selecting a 
setting other than BLACK BOARD/WHITE BOARD, you can fine-
tune the color tone to the desired level on the 1 to 5 scale.
LAMP MODESTANDARDSelect this setting when you want to view images in a well-lit 
room.
LOWSelect this setting when you want to view images at a moderate 
light intensity. The operating sound is consequently reduced, and 
the lamp lifetime becomes longer.
 When this mode is switched, projected images may flicker.
 If this mode is frequently switched, the lamp may be deterio-
rated. 
STANDBY MODESTANDARDLAN can be activated in STANDARD MODE. MONITOR OUT 
cannot be activated.
LOWPower consumption can be lowered when selecting LOW. How-
ever, LAN and MONITOR OUT cannot be activated.
AUDIO INPUTAUTOIf AUTO is selected, selects AUDIO 1 when the input source is 
COMPUTER 1, selects AUDIO 2 when the input source is COM-
PUTER 2, selects AUDIO 3 when the input source is VIDEO/S-
VIDEO, selects HDMI when the input source is HDMI.
AUDIO 1/AUDIO 2/AUDIO 3 Select the audio input.
MIX
 Selects MIX signal of AUDIO 1 and AUDIO 2. You can change the 
balance of AUDIO 1/AUDIO 2 using MIX .
AUTO POWER ON ON/OFFWhen this mode is set to ON, the lamp is automatically lit when 
the power cord is plugged in the wall outlet. Select ON when you 
set the projector at the ceiling.
 When the lamp is off, the projector is in standby. Use the 
remote control to turn on the lamp.
AUTO POWER OFF OFF/5-60 minSelects a desired timer setting until the projector enters the 
standby mode when there is no signal input from the source.
IMAGE CAPTURE SETUP
 Use to capture the screen for the splash screen. (See page 32.)
SPLASH SCREEN ON/OFFSelect ON to display the splash screen when the projector is pow-
ered on.
BACK COLOR BLUE/BLACK/IMAGESelects the background color that is displayed when there is no 
signal input from the source.
AV MUTE MODE BLACK/IMAGEUse to choose the background, either BLACK, or IMAGE, which 
will be displayed when the AV MUTE button is pressed. When 
IMAGE is chosen, the splash screen will be displayed.
IMAGE REVERSEOFFSelect this setting when you want to view images from the front 
with the projector set on the floor.
MIRRORSelect this setting when you want to view images from behind the 
screen with the projector set on the floor.
INVERTSelect this setting when you want to view images from behind the 
screen with the projector set at the ceiling.
MIRROR INVERTSelect this setting when you want to view images from the front 
with the projector set at the ceiling.
LAMP MODE
OFF IMAGE 
REVERSE
WALL SCREEN
BEIGE
STANDBY MODESTANDARD STANDARDAUDIO INPUT
AUTO
opt.
INSTALLATION
AUTO POWER
OFF OFF OFF AUTO POWER
ON 
IMAGE CAPTUREONSPLASH
SCREEN ON
BACK COLORBLUEAV MUTE MODEBLACK
SETUP 
						

							EN-23
ENGLISH
Menu operation (continued)
3. FEATURE menu
 You can select CINEMA MODE only when the input signal is a TV60, TV50, 480i, 576i or 1080p video signal.
Menu option Setting Feature description
ASPECTAUTOSelect to change the aspect ratio automatically depending on the 
input signal. (Select this option for normal use.)
16:9Select to project images in full size (1920 x 1080 pixels) irrespective of 
type of input signal.
REAL Select to project images in their original size as input.
PASSWORD FUNCTION  Use this setting to activate or deactivate the password lock.
MENU POSITION 2 options Use this setting to change the position of the menu on the screen.
CINEMA MODEAUTOThe film mode will be automatically activated when a film source sig-
nal is input.
Select AUTO for normal use.
When flicker occurs on the screen, frame dropping or other incorrect 
display occurs, or jaggies on slanting lines are remarkable, select 
either FILM or VIDEO, which improves the symptom better.
FILM Fixed to the film mode.
VIDEO The film mode will not be activated.
VIDEO SIGNAL 8 optionsSelect Auto to automatically set the appropriate video format in rela-
tive to the input signal. If projected images arent displayed correctly, 
select a desired video format manually.
SETUPAUTO Select this setting to automatically change the SETUP mode.
OFFSelect this setting to increase the density of black. Use this setting 
when images are dark.
3.75%/7.5%Select this setting to lower the density of black.
 When 7.5% is set, the brightness is decreased by the setup can-
cel function for the U.S.
SPLIT OK
 Use to sprit the screen in two and display a computer image on the left 
screen and a video image on the right screen. (See page 32.)
LANGUAGE 12 languages Selects a desired language for the menu.
QUICK MENU OK
 Moves to QUICK MENU.
RESET ALL OK
 Resets all menu settings except for PASSWORD FUNCTION and 
LANGUAGE to the default.
SPLIT
AUTO
AUTO
MENU POSITION
VIDEO SIGNAL?
ASPECT
QUICK MENUEnglish
LANGUAGEAèOK
OK
RESET ALLOK
DISPLAY INPUT PASSWORD
FUNCTION
CINEMA MODEAUTO1.
SETUP
AUTO
FEATURE
opt. 
						

							EN-24
Menu operation (continued)
4. SIGNAL menu
 Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.
 When you change the horizontal or vertical position to a large extent, noise may appear.
 The adjustable range of the vertical position varies depending on the type of the input signal. Though the image may stay in the same position 
even when the setting value is changed, such symptom is not a malfunction.
 SHUTTER will not work correctly during keystone adjustment.
 When you increase the setting value of OVER SCAN, noise may appear on the screen.
 See pages 27 and 28 for the detailed setting procedure.
Important: You can set the IMAGE, SIGNAL, SIGNAL-RESOLUTION (MEMORIZE) and SIGNAL-USER menus only when the signal is supplied.
Menu option Setting Feature description
SIGNAL RESOLUTION 
(MEMORIZE) menu
SIGNAL USER menu
MEMORY CALLAUTO / MEMORY 1  /
MEMORY 2 
Use to select the setting of RESOLUTION (MEMORIZE) already saved.
Impossible to select if no setting has been saved. AUTO is selected by 
default. It optimizes the signal format automatically depending on the 
type of video signal supplied from the computer. Press the ENTER but-
ton to clear the setting already saved.
RESOLUTION
(MEMORIZE )The current resolution is displayed. To change the current setting, press 
the ENTER button to display the RESOLUTION (MEMORIZE) menu. 
The new setting can be saved to MEMORY 1 or MEMORY 2.
VERTICAL
FREQUENCY-The vertical frequency of the currently projected video signal is dis-
played.
HORIZONTAL
FREQUENCY-The horizontal frequency of the currently projected video signal is dis-
played.
HORIZ. PIXELS 640-1920The number of horizontal pixels of the currently projected video signal is 
displayed. When you change the current setting, select EXECUTE, and 
then press the ENTER button, the image is automatically adjusted 
according to the resolution you set. The adjustment result can be saved 
to MEMORY 1 or MEMORY 2.
VERT. LINES 350-1200The number of vertical pixels of the currently projected video signal is 
displayed. When you change the current setting, select EXECUTE, and 
then press the ENTER button, the image is automatically adjusted 
according to the resolution you set. The adjustment result can be saved 
to MEMORY 1 or MEMORY 2.
EXECUTE OK
 Press the ENTER button to start the automatic adjustment. At the com-
pletion of the automatic adjustment, a message is displayed and you 
can save the adjustment result to MEMORY 1 or MEMORY 2.
CANCEL OK
 The process to change the current resolution is canceled and the SIG-
NAL menu is displayed.
HORIZ. POSITION 0-999 Use to adjust the horizontal position of the projected image.
VERT. POSITION 0-999 Use to adjust the vertical position of the projected image.
FINE SYNC. 0-31Use to eliminate flickering or blur, if appears, viewing the projected 
image.
TRACKING 0-9999Use to eliminate vertical wide stripes, if appears, viewing the projected 
image.
COMPUTER INPUTAUTO The proper setting is automatically selected.
RGBSelect this option when connecting the projector to high definition video
equipment having R, G, and B output terminals.
YC
BCR/YPBPRSelect this option when connecting the projector to a DVD player or 
other device having Y, CB, and CR (or Y, PB, and PR) component video 
output terminals.
OVER SCAN 100%-90% Use to adjust the display area of projected image.
HOLD OFF / ON
 Use to adjust the image when flagging occurs near the top of the 
screen.
USER OK
 CLAMP POSITION 1-255 Use to correct solid white or solid black in the projected image.
CLAMP WIDTH 1-63 Use to correct solid black in the projected image.
VERT. SYNC AUTO / OFFUse to adjust the image when its motion doesn’t run smoothly. Select 
AUTO for normal use.
LPF ON / OFF Use to select whether or not to enable the LPF.
SHUTTER(U) 0-20Use to adjust the image when noise appears on the top part of the 
image.
SHUTTER(L) 0-20Use to adjust the image when noise appears on the bottom part of the 
image.
SHUTTER(LS) 0-20Use to adjust the image when noise appears on the left half of the 
image.
SHUTTER(RS) 0-20Use to adjust the image when noise appears on the right half of the 
image.
USEROKOFFHOLD100%
OVER SCAN
SIGNAL
R G BR G B
HORIZ. POSITION 0
VERT. POSITION 0
TRACKING 0
COMPUTER
INPUT RGB FINE SYNC. 0
opt.
MEMORY CALL
RESOLUTION
(MEMORIZE     ) (MEMORIZE     )
V HA
UAUTO1024x768
SIGNALRESOLUTION (MEMORIZE)VERTICAL
FREQUENCY
HORIZONTAL
FREQUENCY
VERT. LINES
EXECUTE HORIZ. PIXELS
CANCEL 
opt.
75.04 Hz
1024 60.02 KHz
768
OK
OK
SIGNALUSERCLAMP
POSITION1
CLAMP WIDTH 1
LPF OFF
SHUTTER(U) VERT. SYNC. AUTO
0
?
SHUTTER(L)
0SHUTTER(LS)
0SHUTTER(RS)
0
opt. 
						

							EN-25
ENGLISH
Menu operation (continued)
5. NETWORK menu
6. INFORMATION menu
Menu option Setting Feature description
NETWORK IP CONFIG 
menu
PROJECTOR NAME*****
...Displays PROJECTOR NAME. Displays PROJECTOR NAME in 
blank when PROJECTOR NAME is not set.
SET
 Set PROJECTOR NAME. Enter up to 15 characters (alphabets or 
numeric characters).
NETWORK PASSWORD OK
 Set the password for Web control or PJLink certification.
IP CONFIG OK Select this setting for IP Configuration.
DHCP ON  / OFF Use this setting when you obtain IP CONFIG automatically by 
DHCP server.
IP ADDRESS***,***,***,***Displays IP ADDRESS. However, IP ADDRESS is not set as factory 
default, and cannot be displayed.
SET
 Set IP ADDRESS. When DHCP is set to ON, you cannot change 
this setting.
SUBNET MASK***,***,***,***Displays SUBNET MASK. However, SUBNET MASK is not set as 
factory default, and cannot be displayed.
SET
 Set SUBNET MASK. When DHCP is set to ON, you cannot change 
this setting.
DEFAULT GATEWAY***,***,***,***Displays DEFAULT GATEWAY. However, DEFAULT GATEWAY is 
not set as factory default, and cannot be displayed.
SET
 Set DEFAULT GATEWAY. When DHCP is set to ON, you cannot 
change this setting.
MAC ADDRESS xx-xx-xx-xx-xx-xx Displays MAC ADDRESS.
PJLink CERTIFICATION ON   / OFF  Use this setting for PJLink Certification.
NETWORK RESET OK  Resets the Network Setting.
Menu option Feature description
LAMP TIME (LOW)This menu shows a lamp operating time (hour) calculated assuming that LAMP MODE is LOW.
 When the LAMP MODE is STANDARD, this menu shows a longer lamp operating time than 
the actual time. (See page 37 for the interval of lamp replacement.)
 When the lamp operating time is 0 to 10 hours, 0H is displayed. When the lamp operating 
time exceeds 10 hours, the actual hours are displayed.
 When the lamp operating time reaches 3750 hours, the bar turns yellow. When it reaches 
4750 hours, the bar turns red.
(The lamp lifetime is 5000 hours.)
INPUT Indicates the name of the terminal to which the currently projected video signal is being input.
RESOLUTION Indicates the resolution of the currently projected video signal.
VERTICAL FREQUENCY Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL FRE-
QUENCYIndicates the horizontal frequency of the currently projected video signal.
SYNC. TYPE Indicates the type of the sync signal for the currently projected video signal.
opt.
NETWORKPROJECTOR 
NAME
NETWORK
PASSWORD
PJLink
CERTIFICATION
OKSET
NETWORK RESETOK
IP CONFIGOKON
opt.
NETWORKIP CONFIGDHCP
IP ADDRESS
DEFAULT
GATEWAY
MAC ADDRESS
SUBNET MASK
xx-xx-xx-xx-xx-xx192.168.0.10
255.255.255.0
10.132.1.1
ON
LAMP TIME (LOW)
INPUT
RESOLUTIONVERTICAL
FREQUENCY
HORIZONTAL
FREQUENCY
SYNC. TYPE 5wire60.02 KHz75.04 Hz 1024x768 COMPUTER20 HRGB
HV
INFORMATION
opt. 
						

							EN-26
Image adjustment
Adjusting projected images
To adjust the brightness (CONTRAST and BRIGHT-
NESS):
You can make adjustments of the brightness of the projected image 
using the menu.
(See page 19 or 21 for the menu options.)
1. Display the QUICK MENU or the IMAGE menu.
2. Select CONTRAST or BRIGHTNESS by pressing the S or T 
button.
3. Adjust the selected option by pressing the W or X button.
To cancel the menu:
4. Press the MENU button.
CONTRASTSelect to adjust the contrast of the image. Every time the X button is 
pressed, the image becomes brighter and more clearly defined. Every 
time the W button is pressed, the image becomes darker and less 
clearly defined.
BRIGHTNESSEvery time the X button is pressed, the image becomes brighter. 
Every time the W button is pressed, the image becomes darker.
To adjust the color (COLOR and TINT):You can adjust the color of the projected image using the menu.
(See page 21 for the menu options.)
1. Display the IMAGE menu.
2. Select COLOR or TINT by pressing the S or T button.
 COLOR and TINT is selectable only when the input signal is 
VIDEO.
 TINT is selectable only when the NTSC or 4.43NTSC signal 
is input.
3. Adjust the selected option by pressing the W or X button.
To cancel the menu:
4. Press the MENU button.
COLORUse to adjust the color density of the projected image. Every time the 
X button is pressed, the color becomes darker. Every time the W but-
ton is pressed, the color becomes lighter.
TINTUse to adjust the tint of the projected image. Every time the X button 
is pressed, the image appears more greenish. Every time the W but-
ton is pressed, the image appears more reddish.
To sharpen or soften the projected image (SHARPNESS):You can adjust the sharpness of the projected image using the menu.
(See page 19 or 21 for the menu options.)
1. Display the QUICK MENU or the IMAGE menu.
2. Select SHARPNESS by pressing the S or T button.
3. Adjust the selected option by pressing the W or X button.
To cancel the menu:
4. Press the MENU button.
To adjust the tone of white (COLOR TEMP.):You can select a preset color temperature (white tone) using the 
menu.
(See page 19 or 21 for the menu options.)
1. Display the QUICK MENU or the IMAGE menu.
2. Select COLOR TEMP. by pressing the S or T button.
3. Select your desired color temperature by pressing the W or X 
button.
To cancel the menu:
4. Press the MENU button.
To adjust the tone of white (To customize the color tem-
perature):
To set (and store) a user-defined color temperature, perform the fol-
lowing procedure.
(See page 21 for the menu options.)
1. Select COLOR TEMP. in the IMAGE menu.2. Press the W or X button to select USER  .
3. Press the ENTER button.
4. Press the S or T button to select the desired setting.
5. Press the W or X button to adjust the selected setting.
6. Repeat steps 4 and 5 for optimal adjustment results.
To cancel the menu:
7. Press the MENU button.
To enable the stored color temperature:
1. Set COLOR TEMP. to USER   in the IMAGE menu.
About color temperatureThere are different variations in white color. Color temperature is a 
way to show these variations in white. When the temperature is 
low, white appears reddish. When the temperature rises, white 
appears bluish. For example, you can change the temperature 
using the following procedures.
To raise the temperature: Increase CONTRAST B (blue) and 
decrease CONTRAST R (red).
To reduce the temperature: Decrease CONTRAST B (blue) and 
increase CONTRAST R (red).
 If you set CONTRAST R, G, and B to negative values, the 
brightness of the image cant retain the original even when you 
maximize the value of CONTRAST in the QUICK MENU or the 
IMAGE menu.
Color EnhancerYou can set user-defined values for the brightness and hue using the 
menu. (See page 21 for the menu options.)
1. Display the IMAGE menu.
2. Select COLOR ENHANCER by pressing the S or T button.
3. Select USER   by pressing the W or X button.
4. Press the ENTER button.
5. Select a setting you want to set.
GAMMA modeUse this setting to set an optimal gamma value and modulation of 
lamp power. The level of brightness can be adjusted for subdued 
colors.
DYNAMIC ............ Select when viewing crisp, clear images in a 
brightly lit room or strong daylight.
The level of brightness is adjusted to higher levels.
NATURAL ............ Select when viewing images of which colors are 
more faithfully reproduced. 
The level of brightness and vividness is adjusted 
to optimal levels.
DETAIL ................ Select when viewing images of which brightness 
should be kept relatively low, such as movies 
and music video clips.
CONTRAST B 0BRIGHTNESS R 0
CONTRAST RCOLOR TEMP.-USER0CONTRAST G 0
BRIGHTNESS G 0BRIGHTNESS B 0
AUTO COLOR
ENHANCER
COLOR ENHANCER-USER
BrilliantColorTM10RGB-COLOR0RGB-TINT0
GAMMA MODE DYNAMIC 
						

							EN-27
ENGLISH
Image adjustment (continued)
BrilliantColorTM
Use this setting to make colors with medium brightness, such as yellow and the skin tone appear natural. Press the W button to decrease the value 
to lessen the effect. Press the X button to increase the value to heighten the effect. (BrilliantColorTM has no effect at value 0.)
6. Select a value by pressing the W or X button.
 For more enhanced color reproduction, set BrilliantColor
TM to 0. The white area of the color wheel is disabled, and you can reproduce true-
color images.
RGB-COLORUse to adjust the color intensity of the projected image. Every time the X button is pressed, the color becomes thicker. Every time the W button is 
pressed, the color becomes lighter.
RGB-TINTUse to adjust the color balance of the projected image. Every time the X button is pressed, the image appears more greenish. Every time the W but-
ton is pressed, the image appears more reddish.
How to adjust the computer imageThis projector automatically selects a proper signal format according to the type of video signal supplied from the computer. However, video signals 
from the computer may not be projected correctly depending on the types of the computer and images to be projected. In such a case, make adjust-
ment according to the flowchart below.
Adjustment is completed. When the size and position of
the computer image are not correct.
Project a bright computer image containing as many texts and characters as possible.
Note) Disable the screen saver if it is active.
Press the AUTO POSITION button. When a signal from a video device (or signal marked with *2 on page 44) is being input, a window
to select the adjustment mode is displayed. Select AUTO ADJUST using the 
 or  button and press the ENTER button.
Settings are automatically and optimally adjusted for the input signal.
Image is projected
correctly.
YESNO
Display the screen resolution setting menu of your computer.
(Example: In the case of Windows
 PC, right-click on the desktop, select Properties, and click the
Settings tab to display the screen resolution setting.)
The screen
resolution setting of your computer
is different from the setting of RESOLUTION
(MEMORIZE    ) in the SIGNAL menu
of the projector.
Select RESOLUTION (MEMORIZE    ) in the SIGNAL menu
and press the ENTER button.
Set HORIZ. PIXELS and VERT. LINES to the values of the screen resolution of your computer.
(Example: When the screen resolution of the computer is 1280x800, set HORIZ. PIXELS to 1280 and
VERT. LINES to 800.)
Select EXECUTE and press the ENTER button.
Automatic adjustment starts according to the selected resolution.
Image is projected
correctly.
Perform manual
adjustment.
After the memory saving
massage is displayed,
select MEMORY 1 or
MEMORY 2 and press the
ENTER button.After the memory saving
massage is displayed,
select MEMORY 1 or
MEMORY 2 and press the
ENTER button.When you don’t save
the adjustment result,
press the MENU button.
Adjustment is canceled.
Adjust HORIZ. POSITION, VERT. POSITION, and TRACKING
in the SIGNAL menu. For details, see “Simple method to
adjust the image position.” (See page 28.) YESNO
YESNO YESNO 
						

							EN-28
Image adjustment (continued)
How to adjust the image supplied from the computer using the menu:Carry out the following procedures according to the symptoms.
Wide strips appear. ....................................................... Adjust TRACKING in the SIGNAL menu.
The projected image flickers.
The projected image is blurred.  .................................... Adjust FINE SYNC. in the SIGNAL menu.
The projected image is displaced horizontally.  ............. Adjust HORIZ. POSITION in the SIGNAL menu. Every time the W button is pressed, the 
image moves to the right. Every time the X button is pressed, the image moves to the left.
The projected image is displaced vertically  .................. Adjust VERT. POSITION in the SIGNAL menu. Every time the W button is pressed, the 
image moves down. Every time the X button is pressed, the image moves up.
The top part of the image flags.  ................................... Change the setting of HOLD in the SIGNAL menu. Select ON 
 , press the ENTER button, 
and adjust BEGIN or END to minimize the flagging.
A solid black or solid white appears in the image.  ........ Adjust CLAMP POSITION or CLAMP WIDTH in the SIGNAL - USER menu.
The motion doesnt run smoothly. ................................. Adjust VERT. SYNC in the SIGNAL - USER menu. Select AUTO for normal use.
Noise appears on the right or left half of the image. ..... Adjust SHUTTER(LS) or SHUTTER(RS) in the SIGNAL - USER menu.
Noise appears on the top or bottom part of the image.  Adjust SHUTTER(U) or SHUTTER(L) in the SIGNAL - USER menu.
1. Display the SIGNALmenu.
2. Press the S or T button to select an item to adjust.
3. Adjust the selected item by pressing the W or X button.
To cancel the menu:
4. Press the MENU button.
 Do not change the settings of the SIGNAL menu in normal use.
LPF (Progressive filter)You can select whether or not to enable the LPF.
Vertical or horizontal streak noise may appear on the projected image, depending on the type of the DVD player or game console you use. In such a 
case, you can reduce such streak noise by enabling the LPF. However, projected images become softened slightly.
Simple method to adjust the image position
To adjust the horizontal position:
1. Align the left edge of the image with the left side of the screen by adjusting HORIZ. POSITION. Then, align the right edge of the image with 
the right side of the screen by adjusting TRACKING.
2. Repeat step 1 above to complete the adjustment of the horizontal position.
To adjust the vertical position:
3. Align the upper edge of the image with the upper side of the screen by adjusting VERT. POSITION. 
						

							EN-29
ENGLISH
Network settings
You can set the network of the projector using the menu.
Setting Projector Name1. Display the NETWORK menu. (See page 21 for menu setting.)
2. Press the S or T button to select PROJECTOR NAME.
3. Press the W or X button to select SET   .
4. Press the ENTER button.
 PROJECTOR NAME screen appears.
5. Press the direction buttons to move the key cursor, select the 
characters or marks to enter, and press the ENTER button.
 Projector Name can be set using up to 15 characters includ-
ing alphabets (capital/small), numeric characters, or marks.
← key: Shifting the position of enter cursor to the 
left for each character.
→ key: Shifting the position of enter cursor to the 
right for each character.
DEL key: Deleting the character in the position of 
enter cursor for each character.
caps/CAPS key: Switching an alphabet character to CAPI-
TAL or small.
NEXT/PREV key:Switching the marks listed on the fourth 
line.
SPACE key: Inserting a space in the position of enter 
cursor.
CLEAR key: Deleting all the entered characters.
6. When selecting OK, the setting is completed as the name 
stored. However, when selecting CANCEL, the setting is com-
pleted without storing.
 It may take some time to reflect the settings.
Network Password Settings1. Display the NETWORK menu. (See page 21 for menu setting.)
2. Press the S or T button to select NETWORK PASSWORD.
3. Press the ENTER button.
 CURRENT NETWORK PASSWORD screen appears.4. Press the direction buttons to move the key cursor, select the 
characters or marks to enter, and press the ENTER button.
 Password can be set using up to 32 characters including 
alphabets (capital/small) or numeric characters.
← key: Shifting the position of enter cursor to the 
left for each character.
→ key: Shifting the position of enter cursor to the 
right for each character.
DEL key: Deleting the character in the position of 
enter cursor for each character.
caps/CAPS key: Switching an alphabet character to CAPI-
TAL or small.
CLEAR key: Deleting all the entered characters.
 The default password is admin.
5. Select OK, and NEW NETWORK PASSWORD screen appears 
if the entered password is correct.
 If the entered password is not correct, CURRENT NET-
WORK PASSWORD screen appears again.
6. Enter the NEW NETWORK PASSWORD and CONFIRM NET-
WORK PASSWORD.
 Password can be set using up to 32 characters including 
alphabets (capital/small) or numeric characters.
← key: Shifting the position of enter cursor to the 
left for each character.
→ key: Shifting the position of enter cursor to the 
right for each character.
 key: Shifting the position of enter cursor 
between NEW NETWORK PASSWORD 
and CONFIRM NETWORK PASSWORD.
DEL key: Deleting the character in the position of 
enter cursor for each character.
caps/CAPS key: Switching an alphabet character to CAPI-
TAL or small.
CLEAR key: Deleting all the entered characters.
7. When NEW NETWORK PASSWORD and CONFIRM NET-
WORK PASSWORD are matched, the setting is completed after 
changing the NETWORK PASSWORD.
 If the entered content is not matched, NEW NETWORK 
PASSWORD screen appears again after an error dialog is 
displayed.
 It may take some time to reflect the settings.
IP Settings1. Display the NETWORK menu. (See page 21 for menu setting.)
2. Press the S or T button to select IP CONFIG.
3. Press the ENTER button.
 IP CONFIG menu appears.
opt.
NETWORKPROJECTOR 
NAME
NETWORK
PASSWORD
PJLink
CERTIFICATION
OKSET
NETWORK RESETOK
IP CONFIGOKON
PROJECTOR 
NAMESET
CODE : FD630       v z ?%
NETWORK
PASSWORDOK
↔
IP CONFIGOK
IP CONFIGDHCP
IP ADDRESS
DEFAULT
GATEWAY
MAC ADDRESS SUBNET MASK
xx-xx-xx-xx-xx-xx192.168.0.10
255.255.255.0
10.132.1.1ON 
						

							EN-30
Network settings (continued)
Setting or Clearing DHCP1. Display the IP CONFIG menu.
2. Press the S or T button to select DHCP.
3. Press the ENTER button.
 Confirmation dialog appears.
4. Press the W or X button to select ON   or OFF   . 
5. Select the item to set, and press the ENTER button.
 To cancel the setting, press the MENU button.
 It may take some time to reflect the settings.
 When setting DHCP to ON, IP ADDRESS, SUBNET MASK, 
and DEFAULT GATEWAY cannot be set. If you set those set-
tings, set DHCP to OFF and perform the IP settings as the 
following procedures.
IP Address Settings1. Display the IP CONFIG menu.
2. Press the S or T button to select IP ADDRESS.
3. Press the W or X button to select SET   .
4. Press the ENTER button.
 IP ADDRESS screen appears.
5. Press the direction buttons to move the key cursor, select the 
numbers to enter, and press the ENTER button.
 Set the numeric value within the range from 0 to 255. How-
ever, set the numeric value for the final octet within the range 
from 1 to 254.
← key: Shifting the position of enter cursor to the left.
→ key: Shifting the position of enter cursor to the right.
DEL key:Deleting the character in the position of enter cur-
sor for each character.
6. When selecting OK, the setting is completed as the IP 
ADDRESS stored. However, when selecting CANCEL, the set-
ting is completed without storing.
 It may take some time to reflect the settings.
Subnet Mask Settings1. Display the IP CONFIG menu.
2. Press the S or T button to select SUBNET MASK.
3. Press the W or X button to select SET   .
4. Press the ENTER button.
 SUBNET MASK screen appears.
5. Enter the Subnet Mask.
 Refer to IP Address Settings for the detail of entering.6. When selecting OK, the setting is completed as the Subnet 
Mask stored. However, when selecting CANCEL, the setting is 
completed without storing.
 It may take some time to reflect the settings.
Default Gateway Settings1. Display the IP CONFIG menu.
2. Press the S or T button to select DEFAULT GATEWAY.
3. Press the W or X button to select SET   .
4. Press the ENTER button.
 DEFAULT GATEWAY screen appears.
5. Enter the Default Gateway.
 Refer to IP Address Settings for the detail of entering.
6. When selecting OK, the setting is completed as the Default 
Gateway stored. However, when selecting CANCEL, the setting 
is completed without storing.
 It may take some time to reflect the settings.
Setting or Clearing PJLink CertificationPerform the settings to start PJLink protocol communication.
 See page 34 for the detail of PJLink.
1. Display the NETWORK menu. (See page 21 for menu setting.)
2. Press the S or T button to select PJLink CERTIFICATION.
3. Press the ENTER button.
 Confirmation dialog appears.
4. Press the W or X button to select ON   or OFF   . 
5. Select the item to set, and press the ENTER button.
 To cancel the setting, press the MENU button.
 It may take some time to reflect the settings.
Initialization of Network Settings1. Display the NETWORK menu. (See page 21 for menu setting.)
2. Press the S or T button to select NETWORK RESET.
3. Press the ENTER button.
 Confirmation dialog appears.
4. If pressing the ENTER button again, the Network Settings can 
be initialized.
 It may take some time to reflect the settings.
DHCPON
IP ADDRESSSET
SUBNET MASKSET
DEFAULT
GATEWAYSET
PJLink
CERTIFICATIONON
NETWORK RESETOK