Home > Mitsubishi > Projector > Mitsubishi Ew331u St Projector User Manual

Mitsubishi Ew331u St Projector User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Mitsubishi Ew331u St Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 561 Mitsubishi manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							EN-51
    ENGLISH
    13. Restart the projector.
    Do not turn the power on with the lamp cover removed.
    Resetting the lamp timer
    14. After the startup logo, open the On-Screen Display (OSD) menu. Go to 
    the SYSTEM SETUP: Advanced > Lamp Settings menu. Press 
    MODE/ENTER. The Lamp Settings page is displayed. Press   to 
    highlightReset lamp timer and press MODE/ENTER. A warning 
    message is displayed asking if you want to reset the lamp timer. Highlight 
    Reset and press MODE/ENTER. The lamp time will be reset to 0. 6. Lift the handle so that it stands up. Use the handle to slowly pull the 
    lamp out of the projector.
    • Pulling it too quickly may cause the lamp to break and scatter broken glass 
    in the projector.
    • Do not place the lamp in locations where water might splash on it, children 
    can reach it, or near flammable materials.
    • Do not insert your hands into the projector after the lamp is removed. If you 
    touch the optical components inside, it could cause color unevenness and 
    distortion of the projected images.
    7. As shown in the figure, lower the new lamp into the lamp 
    compartment while aligning the lamp with the holes in the lamp 
    compartment. Make sure it fits in the projector.
    8. Tighten the screw that secures the lamp.
    • Loose screw may cause a bad connection, which could result in 
    malfunction.
    • Do not over tighten the screw.
    9. Ensure the handle is fully laid flat and locked in place.
    10. Place the lamp protection film supplied with the new lamp on the 
    lamp compartment.
    11. As shown in the figure, replace the lamp cover on the projector.
    12. Tighten the screws that secure the lamp cover. 
    • Loose screw may cause a bad connection, which could result in 
    malfunction.
    • Do not over tighten the screws.
    2
    1
    2
    1 
    						
    							EN-52
    • Do not reset if the lamp is not new or replaced as this could cause damage. 
    •
    This projector uses a lamp that contains mercury. Disposal of the lamp 
    or the projector with the lamp may be regulated due to environmental 
    considerations. For disposal or recycling information, please contact 
    your local authorities or the Electronic Industries Alliance: 
    www.eiae.org. (For US only). 
    						
    							EN-53
    ENGLISH
    Indicators
    LightStatus & Description
    PowerTe m pLamp
    Power events
    Orange Off OffStand-by mode
    Green
    FlashingOff OffPowering up
    Green Off OffNormal operation
    Orange
    FlashingOff Red• The projector needs 90 seconds to cool down as it was abnormally shut 
    down without the normal cooling down process.
    • The projector needs to cool for 90 seconds after the power is turned off.
    Orange
    FlashingOff OffCooling down.
    Lamp events
    Orange
    FlashingOff RedThe projector has shutdown automatically. If you try to re-start the projector, it 
    will shutdown again. Please contact your dealer for assistance.
    Off Off Red• The projector needs 90 seconds to cool down.
    • Please contact your dealer for assistance.
    Thermal events
    Off Red Off
    The projector has cooling down automatically. If you try to re-start the projector, it 
    will shut down again. Please contact your dealer for assistance.
    Off Red Red
    Off Red Green
    Red Red Red
    Red Red Green
    Green Red Red
    Green Red Green
    Orange Red Red
    Orange Red Green
    Off Green Red
    Off Green Green 
    						
    							EN-54
    Troubleshooting
    The projector does not turn on.
    No picture
    Blurred image
    Remote control does not work
    The password is incorrect
    The LAN function cannot be used
    CauseRemedy
    There is no power from the power cable.Plug the power cord into the AC inlet on the projector, and plug 
    the power cord into the power outlet. If the power outlet has a 
    switch, make sure that it is switched on.
    Attempting to turn the projector on again during 
    the cooling process.Wait until the cooling down process has completed.
    CauseRemedy
    The video source is not turned on or connected 
    correctly.Turn the video source on and check that the signal cable is 
    connected correctly.
    The projector is not correctly connected to the 
    input signal device.Check the connection.
    The input signal has not been correctly selected.Select the correct input signal with the SOURCE key on the 
    projector or remote control.
    The lens cover is still closed. Open the lens cover.
    CauseRemedy
    The projection lens is not correctly focused. Adjust the focus of the lens using the focus ring.
    The projector and the screen are not aligned 
    properly.Adjust the projection angle and direction as well as the height of 
    the unit if necessary.
    The lens cover is still closed. Open the lens cover.
    CauseRemedy
    The battery is out of power. Replace the battery with a new one.
    There is an obstacle between the remote control 
    and the projector.Remove the obstacle.
    You are too far away from the projector. Stand within 8 meters (26 feet) of the projector.
    CauseRemedy
    You do not remember the password.Please see Entering the password recall procedure on page 23
    for details.
    CauseRemedy
    LAN control settings or LAN cable connection are 
    problematic.Verify the LAN control settings. Please see Configuring the LAN 
    Control Settings on page 36 for details. Make sure the LAN 
    cables are properly connected.
    The web page is not shown in the web browser or 
    the web page is not responding.Reload the page to see the data after changing on the screen. If 
    the page is not showing the modified data, check the IP address 
    of projector and log-in again. 
    						
    							EN-55
    ENGLISH
    Specifications
    Projector specifications 
    All specifications are subject to change without notice. 
    General
    Product name DLP™ Projector
    Model name EX321U-ST EW331U-ST
    Optical
    Resolution 1024 x 768 XGA  1280x 800 WXGA
    Display system 1-CHIP DMD
    Lens F/Number F = 2.6, f = 6.9 mm
    Lamp 230 W lamp
    Electrical
    Power supply AC100–240V, 50/60 Hz (Automatic)
    Power consumption
    3.3 A, 330 W (Max), < 0.5 W (Standby) When setting is:
    Standby Monitor Out: Off
    Standby Audio Out:Off
    LAN Control Settings: Off
    Mechanical
    Dimensions 282 mm (W) x 92 mm (H) x 229 mm (D) (Not including protrusion)
    Weight 2.9 Kg (6 lbs) 
    Input terminal
    Computer input
         RGB input D-Sub 15-pin (female) x 2
    Video signal input
         S-VIDEO Mini DIN 4-pin port x 1
         VIDEO RCA jack x 1
    SD/HDTV signal input Analog – D-Sub  Component RCA jack x 3 
                    (through RGB input)
    Digital – HDMI
    Audio signal input PC audio jack x 1 (Share the terminal with computer and video inputs)
    Output terminal
    RGB output D-Sub 15-pin (female) x 1
    Audio signal output PC audio jack x 1 (Share the terminal with computer and video inputs)
    Speaker output 10W x 1
    Control terminal
    Serial control D-Sub 9-pin (Male) x 1
    LAN control RJ-45x 1
    Environmental requirements
    Operating temperature 5°C–35°C (without condensation)
    Operating relative humidity 30%–90% (without condensation) 
    						
    							EN-56
    Dimensions
    282 mm (W) x 92 mm (H) x 229 mm (D) (Not including protrusion)
    Timing chart
    Supported timing for PC input
    * The projector only supports the timing (720 x 400) with 5 lines (R, G, B, H, V).
    * EX321U-ST dose not support the timing of WXGA_120.
    282
    (268)
    110
    45
    68.3
    To l e r a n c e : ± 2 m m 229
    92
    Resolution ModeVertical Frequency 
    (Hz)Horizontal 
    Frequency (kHz)Clock (MHz)
    *720 x 400 720 x 400_70 70.087 31.469 28.3221
    640 x 480VGA_60 59.940 31.469 25.175
    VGA_72 72.809 37.861 31.500
    VGA_75 75.000 37.500 31.500
    VGA_85 85.008 43.269 36.000
    VGA_120 119.518 61.910 52.500
    800 x 600SVGA_60 60.317 37.879 40.000
    SVGA_72 72.188 48.077 50.000
    SVGA_75 75.000 46.875 49.500
    SVGA_85 85.061 53.674 56.250
    SVGA_120 119.854 77.425 83.000
    SVGA_120 119.972 76.302 73.250
    1024 x 768XGA_60 60.004 48.363 65.000
    XGA_70 70.069 56.476 75.000
    XGA_75 75.029 60.023 78.750
    XGA_85 84.997 68.667 94.500
    XGA_120 119.804 98.958 137.750
    1280 x 800WXGA_60 59.81 49.702 83.500
    WXGA_120 119.909 101.563 146.25
    1280 x 1024SXGA_60 60.020 63.981 108.000
    SXGA_75 75.025 79.976 135.000
    SXGA_85 85.024 91.146 157.500
    1280 x 9601280 x 960_60 60.000 60.000 108
    1280 x 960_85 85.002 85.938 148.500
    1440 x 900 WXGA+_60 59.887 55.935 106.500
    1400 x 1050 SXGA+_60 59.978 65.317 121.750
    1600 x 1200 UXGA 60.000 75.000 162.000
    640 x 480@67Hz MAC13 66.667 35.000 30.240
    832 x 624@75Hz MAC16 74.546 49.722 57.280
    1024 x 768@75Hz MAC19 75.020 60.241 80.000
    1152 x 870@75Hz MAC21 75.06 68.68 100.00
    * 
    						
    							EN-
    ENGLISH
    upporte  ti ing  or    P  input
     
    19
    99
    91
    1
    9
    1
    19
    1
    9
    1
    11
    11
    19
    9
    99
    11
    191
    1
    1191
    99
    1919
    19
    19
    11
    111
    E1
    1
    1
    11
    11
    11 
    						
    							EN-
    upporte  ti ing  or  o ponent P Prinput
    i
    upporte  ti ing  or  i eo  n   i eo inputs
    What’s included in the bo
    eplacement part
    19
    19
    1
    1
    11
    11
    1
    1
    -
    N1
    1
    E1
    -1
    -N
    -1
    N1
    AC p
    for E
    for G
    for A
    for S
    for A1 
    1
    1 C
    1 
    1 G
    ption 
    t
    S 
    						
    							EN-44
    Mitsubishi Projector Warranty, Sales Support and Service Information
    North America
    MEVSA (Mitsubishi Electric Visual Solutions America, Inc.)
    Presentation Products Division
    9351 Jeronimo Road Irvine CA 92618, USA
    For Warranty Registration, visit:
    http://www.mitsubishi-presentations.com under Customer Care
    Sales & Inquiries
    Phone :Toll Free (888)307-0349
    E-mail :[email protected]
    Technical Inquiries
    Phone :Toll Free (888)307-0309
    E-mail :[email protected]
    MESCA (Mitsubishi Electric Sales Canada Inc.)
    http://www.mitsubishielectric.ca
    Information Technologies Group, 4299 14th Avenue,
    Markham, Ontario L3R 0J2, Canada
    Sales & Technical Inquiries
    Phone :+1-(800) 450-6487
    Fax :+1-(905) 475-7958
    E-mail :[email protected]
    Customer Care
    E-mail :[email protected]
    Europe
    MEU-FRA (Mitsubishi Electric Europe B.V French Branch)
    25, Boulevard des Bouvets 92 741, Nanterre CEDEX,
    France
    Sales Inquiries
    Phone :+33 (0)1 55-68-55-53
    Fax :+33 (0)1 55-68-57-31
    Technical Inquiries
    Phone :+33 (0)1 55-68-56-42
    Fax :+33 (0)1 55-68-57-31
    MEU-GER (Mitsubishi Electric Europe B.V. German Branch)
    http://www.mitsubishi-evs.de/
    Gothaer Strasse 8, 40880 Ratingen, Germany
    Sales Inquiries
    Phone :0049 - 2102 - 486 9250
    Fax :0049 - 2102 - 486 7320
    Technical Inquiries
    Phone :0049 - 2102 - 486 1330
    Fax :0049 - 2102 - 486 1340
    MEU-IR (Mitsubishi Electric Europe B.V. Irish Branch)
    http://www.mitsubishi.ie/
    Westgate Business Park, Ballymount, Dublin 24, Ireland
    Sales Inquiries
    Phone :+353-1-4198807
    Fax :+353-1-4198890
    Technical Inquiries
    Phone :+353-1-4198808
    Fax :+353-1-4198895
    MEU-IT (Mitsubishi Electric Europe B.V. Italian Branch)
    Centro Direzionale Colleoni, Palazzo Sirio, Viale Colleoni 7,
    20041 Agrate Brianza, Italy
    Sales & Technical Inquiries
    Phone :+39-(0)39-60531
    Fax :+39-(0)39-6053214
    E-mail :[email protected]
    MEU-NL (Mitsubishi Electric Europe B.V. Benelux Branch)
    http://www.mitsubishielectric.nl/
    Nijverheidsweg 23A, 3641 RP Mijdrecht, The Netherlands
    Sales Inquiries
    Phone :+31-297-282461
    Fax :+31-297-283936
    E-mail :[email protected]
    Technical Inquiries
    Phone :+31-297-282461
    Fax :+31-297-283936
    E-mail :[email protected]
    Russia (Mitsubishi Electric Europe B.V Moscow
    Representative Office)
    http://www.mitsubishi-projector.ru/
    Moscow Representative Office, 52/5 Kosmodamianskaya
    Nab., 115054, Moscow, Russia
    Sales & Technical Inquiries
    Phone :(7095) 721-2068
    Fax :(7095) 721-2071MEU-SP (Mitsubishi Electric Europe B.V. Spanish Branch)
    http://www.mitsubishielectric.es/
    Ctra. de Rubi, 76-80, 08173 Sant Cugat del Valles,
    Barcelona, Spain
    Sales Inquiries
    Phone :+34-93.565.31.54
    Fax :+34-93.589.43.88
    E-mail :[email protected]
    Technical Inquiries
    Phone :+34-93.586.27.51
    Fax :+34-93.588.53.87
    E-mail :[email protected]
    MEU-SWE (Mitsubishi Electric Europe B.V Scandinavian
    Branch)
    Hammarbacken 14, Box 750, S-19127, Sollentuna, Sweden
    Sales Inquiries
    Phone :+46-(0)8-6251070
    Fax :+46-(0)8-6251036
    Technical Inquiries
    Phone :+46-(0)8-6251052
    Fax :+46-(0)8-6251036
    MEU-UK (Mitsubishi Electric Europe)
    http://vis.mitsubishielectric.co.uk/products/projectors
    Visual Information Systems Division, Travellers Lane,
    Hatfield, Hertfordshire, AL10 8XB U.K.
    Sales Inquiries
    Phone :+44 (1707) 278684
    Fax :+44 (1707) 278541
    E-mail :[email protected]
    Technical Inquiries
    Phone :+44 (870) 606 5008
    Fax :+44 (1506) 431927
    E-mail :[email protected]
    Asia
    CHINA (Mitsubishi Electric Air-Conditioning & Visual
    Information Systems (Shanghai) Ltd.)
    15/F Henderson Metropolitan, No. 300 East Nanjing Road,
    Shanghai 200001, China
    Sales & Technical Inquiries 
    Phone :+86(21)2312-3030 (Ext.3228)
    Fax :+86(21)2312-3008
    Sale and Service hotline
    Phone :+86-400-820-2130
    HONG KONG (Mitsubishi Electric Ryoden Air-Conditioning
    & Visual Information Systems (HongKong) Ltd.)
    7th Floor, Manulife Tower, 169 Electric Road, North Point,
    Hong Kong
    Sales Inquiries
    Phone :+852-2510-1505
    Fax :+852-2510-0463
    Technical Inquiries
    Phone :+852-2422-0161
    Fax :+852-2487-0181
    SINGAPORE (Mitsubishi Electric Asia Pte. Ltd.)
    http://www.mitsubishielectric.com.sg
    307, Alexandra Road, #05-01/02 Mitsubishi Electric
    Building, Singapore 159943
    Sales Inquiries
    Phone :+65-6473-2308
    Fax :+65-6475-9503
    E-mail :[email protected]
    Technical Inquiries
    Phone :+65-6470-2666
    Fax :+65-6475-9503
    INDIA (Mitsubishi Electric Asia Pte. Ltd.)
    307, Alexandra Road, #05-01/02 Mitsubishi Electric
    Building, Singapore 159943
    Sales Inquiries
    Phone :+65-6473-2308
    Fax :+65-6475-9503
    E-mail :[email protected]
    Technical Inquiries
    Phone :+65-6470-2666
    Fax :+65-6475-9503INDONESIA (Mitsubishi Electric Asia Pte. Ltd.)
    307, Alexandra Road, #05-01/02 Mitsubishi Electric
    Building, Singapore 159943
    Sales Inquiries
    Phone :+65-6473-2308
    Fax :+65-6475-9503
    E-mail :[email protected]
    Technical Inquiries
    Phone :+65-6470-2666
    Fax :+65-6475-9503
    PHILIPPINES (Mitsubishi Electric Asia Pte. Ltd.)
    http://www.mitsubishielectric.com.sg
    307, Alexandra Road, #05-01/02 Mitsubishi Electric
    Building, Singapore 159943
    Sales Inquiries
    Phone :+65-6473-2308
    Fax :+65-6475-9503
    E-mail :[email protected]
    Technical Inquiries
    Phone :+65-6470-2666
    Fax :+65-6475-9503
    VIETNAM (Mitsubishi Electric Asia Pte. Ltd.)
    307, Alexandra Road, #05-01/02 Mitsubishi Electric
    Building, Singapore 159943
    Sales Inquiries
    Phone :+65-6473-2308
    Fax :+65-6475-9503
    E-mail :[email protected]
    Technical Inquiries
    Phone :+65-6470-2666
    Fax :+65-6475-9503
    STC (Setsuyo Astec Corporation Seoul Branch)
    16F KT Bldg., 28-2 Yeouido-dong, Yeoungdeungpo-gu,
    Seoul 150-931, Korea
    Sales & Technical Inquiries
    Phone :+82-1588-5576
    Fax :+82-2-704-8666
    MALAYSIA (Melco Sales Malaysia Sdn Bhd)
    Lot 11, Jalan 219, 46100 Petaling Jaya, Selangor Darul Ehsan, 
    Malaysia.
    Sales & Technical Inquiries
    Phone : +60-(0)3-79573428
    Fax : +60-(0)3-79563950/+60-(0)3-79582576
    Technical & Service Inquiries
    Phone : +60-(0)3-79553997
    Fax : +60-(0)3-79584836
    ME-TWN (Mitsubishi Electric Taiwan Co., Ltd.)
    http://www.MitsubishiElectric.com.tw
    11TH FL., 90 SEC. 6, CHUNG SHAN N. RD., TAIPEI, 111
    R.O.C.
    Sales & Technical Inquiries
    Phone :+886-2-2832-8255
    Fax :+886-2-2833-9813
    MKY (Mitsubishi Electric Kang Yong Watana Co., Ltd. )
    http://www.mitsubishi-kyw.co.th/
    Road, Huamark Bangkapi, Bangkok 10240, Thailand
    Sales & Technical Inquiries
    Phone :+66-2-731-6841
    Fax :+66-2-379-4763
    Oceania
    ME-AUST (Mitsubishi Electric Australia)
    http://www.mitsubishielectric.com.au/163.htm
    348 Victoria Road, Rydalmere, N.S.W. 2116, Australia
    Sales & Technical Inquiries
    Phone :+(612)9684-7777
    Fax :+(612)9684-7208
    E-mail :[email protected]
    Technical Inquiries
    Phone :+(612)9684-7694
    Fax :+(612)9684-7684
    E-mail :[email protected]
    BDT (Black Diamond Technologies Ltd.)
    (Warranty Registration) http://www.bdt.co.nz/projectors/
    warranty.asp
    1 Parliament St, Lower Hutt, Wellington, New Zealand
    Sales Inquiries
    Phone :+64-(0)4-560-9100
    Fax :+64-(0)4-560-9133
    E-mail :[email protected]
    Technical Inquiries
    Phone :+64-(0)4-560-9100
    Fax :+64-(0)4-560-9133
    E-mail :[email protected]
    MITSUBISHI ELECTRIC CORPORATION
    1 Zusho Baba, Nagaokakyo-City, Kyoto JapanVe r.1
    E-mail :[email protected] 
    						
    All Mitsubishi manuals Comments (0)

    Related Manuals for Mitsubishi Ew331u St Projector User Manual