Mitsubishi Electronics Projector XD490U XD460U User Manual

XD490
XD460
DLP™ PROJECTOR
MODEL
XD490U
XD460U
User Manual
This User Manual is important to you.
Please read it before using your projector.
ENGLISH 

EN-2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.
The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert 
the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure 
that may be of suffi cient magnitude to constitute a risk of electric shock.
The exclamation point within an...

EN-3
ENGLISH
Contents
Declaration of Conformity
Model number :   XD490U/XD460U
Trade name :   MITSUBISHI ELECTRIC 
Responsible party :  Mitsubishi Digital Electronics America, Inc.
  9351 Jeronimo Road, Irvine, CA 92618 U.S.A
Telephone number :  +1-(949) 465-6000
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1)  this device may not cause harmful interference, and 
(2)  this device must accept any interference received, including interference...

EN-4
Important safeguards
Please read all these instructions regarding your 
projector and retain them for future reference. Follow 
all warnings and instructions marked on the projector.
1. Read instructions
  All the safety and operating instructions should be 
read before the appliance is operated.
2. Retain instructions
  The safety and operating instructions should be 
retained for future reference.
3. Warnings
  All warnings on the appliance and in the operating 
instructions should be adhered to....

EN-5
ENGLISH
WARNING:
Unplug immediately if there is something 
wrong with your projector.
Do not operate if smoke, strange noise or odor comes 
out of your projector. It might cause fi re or electric 
shock. In this case, unplug immediately and contact 
your dealer.
Never remove the cabinet.
This projector contains high voltage circuitry. An 
inadvertent contact may result in an electric shock. 
Except as specifi cally explained in the User Manual do 
not attempt to service this product by yourself....

EN-6
Preparing your projector
1
23 Checking accessories
The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in 
the package. 
Important:
•  The attached power cords are to be used exclusively for this product. Never use them for other products.
Inserting the batteries into the remote control
1.  Remove the rear lid of the remote control.
2.  Check the polarity (+), (-) of the batteries, and set them 
correctly, inserting their (-) side fi...

EN-7
ENGLISH
Overview
321
57
1098
64
2
1
3
4
8
5
6
7
9
KEYSTONE AUTO POSITIONVIDEOCOMPUTER
ENTER
MENU
VOLUME
1 FOCUS ring
2 ZOOM ring
3 Control panel 
4 Air outlet grille
5  Remote control sensor (Front)
6 Air inlet grille
7 Air outlet grille
8 Terminal board
9  Kensington Security Lock Standard connector
10 Air inlet grille
Control panel
1 POWER button
2 AUTO POSITION / 

 button
3 COMPUTER / 
 button
4 MENU button
5 STATUS indicator
6 POWER indicator
7  KEYSTONE / ENTER button
8 VIDEO / 
 button
9...

EN-8
1
2
3
Preparating your projector (continued)
Bottom side
1 Adjustment foot (Front)
2 Lamp cover
3 Adjustment feet (Rear)
Caution:
Do not replace the lamp immediately after using the 
projector because the lamp would be extremely hot 
and it may cause burns.
1
2
28
COMPUTER
VIDEO S-VIDEO
DVI-D(HDCP)
HOME PageUP
END PageDOWNAUTO POSITION
KEYSTONE
ASPECT
PinP
STILL EXPAND
MUTE WALL SCREEN
12
VOLUME
3
4
5
6
7
8
9
10
11
1227
26
25
24
23
22
21
20
19
17 18
16
14
13
15CE
MENUENTER
LASER
R-CLICK
Remote...

EN-9
ENGLISH
Using the remote control
30° 30°30° 30°
20°
10°20°
10°
20°20°20°20°
Operational range of the remote control
•  Keep the remote control photo-sensor out of direct 
sunlight or fl uorescent lamp light.
•  Keep the remote control photo-sensor at least 2 m
  away from fl uorescent lamps. Otherwise, the re-
mote control may malfunction.
•  If there is an inverter-operated fl uorescent lamp 
near the remote control, the remote control opera-
tion may become unstable.
•  When you use the remote...

EN-10
Setting up your projector
W
A
A=B B
Setting up the screen
Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the 
projection angle of the projector. (See below.)
•  Install the screen and projector so that the projector’s lens is placed at the same height and horizontal position of 
the screen center. 
•  Do not install the screen where it is exposed to direct sunlight or lighting. Light directly refl ecting on the screen 
makes the...