Mitsubishi Electric Wd 65735 Owners Guide

 Chapter 7.  Using IEEE 1394 Devices 81

IEEE 1394 Devices and the Input Selection 
Menu
Select an IEEE 1394 device to watch from the Input Selec-
tion menu just as you would any other device.  See figure 
3, Input Selection menu.
When you connect an IEEE 1394 device to the TV network 
and power it on, the new device is automatically detected.  
Some non-audio/video or incompatible IEEE 1394 
devices, such as personal computers (PCs), may not be 
detected by the TV and do not appear in the Input Selec...

82 Chapter 7.  Using IEEE 1394 Devices

Recording to IEEE 1394 Recordable 
Devices
You can use the TV to control recording to IEEE 1394 
devices.  While recording, you can view a program on a 
different input or power off the TV.  The following table 
lets you see what signals can be recorded to an IEEE 1394 
digital VCR or A / V disc.
Recording 
AvailabilitySignal TypeTV Input
Can be 
recordedDigital channels, 
including high-defini
-
tion channels
ANT 1, ANT 2
Digital signals, includ-
ing...

 Chapter 7.  Using IEEE 1394 Devices 83

Recording from the ChannelView™ Channel 
Guide
ChannelView provides program listings, as sent by the 
broadcasters, for memorized channels on 
ANT 1 and 
ANT 2.  Press the GUIDE key while watching ANT 1 or 
ANT 2 to view ChannelView listings and to set up imme-
diate or future recordings as described here.
Immediate Recording from ChannelView
1.  Press INPUT to open the Input Selection menu.  High-
light an 
ANT 1 or ANT 2 program source and press 
ENTER.
2....

84 Chapter 7.  Using IEEE 1394 Devices

The TV Remote Control and IEEE 
1394 Devices
•  For satellite receivers and cable boxes, you may also be able to use the numbers or other additional 
buttons.
•  For an IEEE 1394 cable box or satellite receiver, you  can also try using the 
CABLE/SAT position of the TV 
remote control to see if it can operate the device.  If 
not, use the remote control that came with the device.
Operation of IEEE 1394 Devices with the TV’s Remote Control
(slide switch set to TV...

 Chapter 7.  Using IEEE 1394 Devices 85

Copying A/V Disc Recordings
Tracks you record to disc may have copy restrictions 
assigned to them.  To learn a track’s copy status, h igh
-
light the track in the Track List and press 
INFO.  Tracks are 
assigned one of these ratings:
Copy Free 
(or no status shown
)
No copy restrictions apply.
Copy Never The track cannot be transferred to 
another recording device.  Tracks 
of this type may have an assigned 
retention period.  See below for 
more information....

86 Chapter 7.  Using IEEE 1394 Devices
Switching Between Analog and 
Digital IEEE 1394 Outputs
To enable switching between analog and digital outputs, 
you must have check marked the Analog Connection
 
box when the New 1394 Device screen displayed when 
you first connected the device.  See the section “Before 
You Begin” in chapter 2, “TV Connections.”
Figure 5.  The ClearThought Auto Input sensing screen 
for IEEE 1394 devices.  Place a check in the Analog 
Connection box if your device has both...

Appendices
Appendix A:  Bypassing the Parental Lock  . . . . . . . . . . . . . . . . .89
Appendix B: 
 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Appendix C: 
 Lamp Cartridge Replacement . . . . . . . . . . . . . . . . .93
Appendix D:
  Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . .95
 

 Appendices 89
Bypassing the Parental Lock
After you set the lock, you must use your pass code to 
view a locked program, view the locked TV, cancel the 
lock, or enter the Parental Lock menus.
If you forget your pass code, you can view the locked 
TV without entering your pass code.  When you are 
prompted for your pass code, press the number 
9 and QV 
buttons on the TV remote control at the same time.  This 
process temporarily unlocks the TV
When entering the Parental Lock menu, this process...

90 Appendices
90 Appendices

This page intentionally left blank