Mitsubishi Electric Lt 40164 Owners Guide

							 4.  TV Menus 51
For assistance call 1(800) 332-2119
Captions
Captions on Digital Channels
The TV can decode captions from the ANT input only.  
Broadcasters can send up to six different captioning 
selections or can send analog captions for a program 
that originated in analog format.  A TV station may broad-
cast only one or two types of captions or none at all.
Captions on Analog Channels
The TV can decode captions from the ANT input and 
the composite VIDEO jacks.  Broadcasters can send 
either standard closed captions or text service.  Standard 
closed captions follow the dialogue of the program and 
display in a small section of the screen.  Text-service closed 
captions often contain information such as weather or 
news and cover a large portion of the screen.
I M P O R TA N T
•	Analog text-service options display a large 
black or gray box on the screen when no 
caption signal is being broadcast.
•	 The	content	of	captions	is	determined	by	the	
broadcaster.  If captions show strange char-
acters, misspellings, or odd grammar, it is not 
a malfunction of the TV.
•	Closed-caption signals are not available through 
HDMI or component jacks.  See the menus for 
devices connected to these inputs for closed-
caption decoding.
CaptionsServices
ServiceOn if Mute, On, OffOn if Mute:  Displays digital closed-caption signal Caption 1 (digital) or CC1 
(analog) when audio from the TV speakers is muted.  While watching TV, 
press MUTE to turn closed captions on/off.
DigitalCaption 1–Caption 6Caption signals sent by the broadcaster.
AnalogCC 1–CC 4
Text 1–Text 4
CC 1–CC 4.•	  Standard closed-caption signals
Text 1–Text 4.  •	Text-service signals
CaptionsFont
StyleAs Broadcast or 
choice of font styles 
(digital captions only)
As Broadcast changes settings to those selected by the captions provider, 
or, if none, to the TV’s own caption defaults.  Use one of the font styles to 
give digital captions a custom appearance.
SizeLarge, Medium, SmallLarge is recommended.
CaptionsColor
 
FontWhite, Black, Magenta, etc.Recommendations for digital captions:
•	A white font on a black translucent back-
ground makes an easy-to-read combination.
•	 Use	contrasting	colors	for	captions	and	back-
ground.
OpacityTranslucent, Opaque, Flashing, Transparent
BackgroundWhite, Black, Magenta, etc.
Opacity 
(Background)
Translucent, Opaque, Flashing, Transparent
 
						

							52 4.  TV Menus
For assistance call 1(800) 332-2119
SetupLanguage
MenuEnglish
Spanish
Displays on-screen menus in either English or Spanish.
Antenna 
Digital 
Audio
Selects the current language for a digital program from the ANT input.  Each digital program may 
include up to seven language choices or there may be no language choice offered.
SetupClock
Set the TV clock to:
Use the TV Timer to power on the TV automatically at a preset time
•	
Receive correct updates to ChannelView listings
•	
Note:  When the Daylight Saving Time change occurs, you must open this menu and set the TV’s clock ahead or back.
TimeHighlight the Clock icon and press ENTER or  to highlight the time.  To edit time and date:
Press •	ENTER to select the item to change.
Press •	  to change values.  Press ENTER to confirm entries.
Press •	   to move to another column.Date
Time 
Zone
Eastern, Central, Mountain, Pacific, etc.  The correct time zone is required for accurate ChannelView 
updates.
Daylight 
Savings
Off, OnSelect the setting for your area (required for accurate ChannelView updates).
SetupTimer
The Timer tells the TV to power on automatically at a time you set.  Use this menu to set a day, 
time, input, and channel for the Timer.  If the TV is already on at the set time, the TV will automati-
cally change to the designated channel or input.
•	 The	TV	clock	must	be	set	before	you	can	use	the	Timer	feature.
•	 As	a	reminder	that	the	TV	Timer	is	set,	the	TV	POWER indicator flashes slowly while the TV is powered off.
•	When the Timer turns on the TV, press any key on the remote control to keep it from turning off after five minutes.
TimerOn, OffSelect On to enable the Timer.
DayDaily, Mon-Fri, (ever y) Sunday, (ever y) Monday, 
(ever y) Tuesday, etc.
Select the day or days of the week for the Timer to 
turn on the TV.
TimeTo set the time for the TV to come on:
Highlighted the time and press 1. ENTER.
Press 2.   to change values.  Press ENTER to confirm entries.
DeviceAnt, DVD, VCR, etc.
Select the input you want displayed when the TV comes on.  Choose from the defined and enabled 
inputs that appear in the Input Selection menu.
ChannelIf the source is the ANT input, press   to select a channel number or press and hold to scroll quickly.
Setup
 
						

							 4.  TV Menus 53
For assistance call 1(800) 332-2119
Setup, continued
SetupChannel
Ant Air, 
Ant Cable
You must perform a channel scan to receive digital channels.  The scan searches for broad-
cast channels and adds them to TV memory.  To start channel scan:
Highlight one of the input selections based on your connection to the1.  ANT input:
Air•	 when connected to an indoor or outdoor antenna.
Cable•	 when connected to direct cable (no cable box)
Select the scan type.2. 
Select •	All Channels for an initial scan or after moving the TV to an new area with a differ-
ent channel line-up.
Select •	New Only to search for channels newly broadcasting since the previous scan.
Press 3.  to highlight SCAN.
Press 4. ENTER to start channel memorization.
See below for additional notes on Scan.
All Channels,
New Only
Scan
EditAfter channel scan, Edit lets you add and delete memorized channels.  Memorized channels are 
those you can tune using the CH key.  Edit the channel list to limit tuning to channels you watch.
•	 Press	CH / PAG E to jump to the next or previous page of channel numbers.
•	 Press	     to move through all channel numbers, one at a time.
Adding/Deleting Channels Using the Channel Edit Menu
Channels marked with a check are in memory.
•	
To add or delete a channel from 
•	 memory, highlight 
the channel number and press 
ENTER.
To add a single digital channel not in the list, see the 
•	
notes under Scan  on this page.
Digital channels are listed by virtual channel number 
•	
with the physical channel number shown in small 
gray text.
Virtual 
 
- Channel Number (digital channels only).  
A channel number sent by a local broadcaster. Physical Digital Channel Number.
 
-   The 
channel number officially assigned to the actual 
broadcast frequency; shown on screen in gray 
text.
Notes on Sca n and Channel Memorization
•	 Channel	memorization	may	take	up	to	15	minutes	to	 complete.
•	
To stop channel memorization before completion, press 
CANCEL.  Channels already added are retained.
•	 When	watching	TV,	press	
CH to move through 
memorized channels.  Press and hold 
CH to speed 
through channels.
•	
To add a digital channel that does not appear in the 
Edit  menu without performing channel memorization:
Look up the 
1.  physical channel number for 
the new digital channel.  See the website 
www.antennaweb.org  for help.
Press 
2. 
INPUT and select the A NT input. Use the number and 
3. 
CANCEL keys to enter the 
physical channel number followed by “-1” and 
ENTER.  For example, for physical channel 36,
3
   6    1  ENTER.
The TV will search for a digital channel on the channel 36 
frequency.  When it finds the channel, it will:
a.  Add the channel to memory.
b.  Change the channel number to the virtual 
channel number sent by the broadcaster.
c.  Add to memory any associated sub-chan -
nels.
Rememorize channels if you move the TV to a different 
•	
geographic area with a different channel line-up.
 
						

							54 4.  TV Menus
For assistance call 1(800) 332-2119
Setup, continued
SetupEnergy
Blue Glow.  (265 series).  Select On to see blue accent lighting when the TV is powered 
on.
SetupNetwork
See “Home Network Setup” on page 42 for use of this menu.
Ethernet ConnectionDHCP (automatic), Manual
[Connection Data]
Wireless Connection [Network ID]
[Connection Data]
Off.  Turns off the radio receiver.  Use this option if there is RF interference with other 
devices.
 
						

							 4.  TV Menus 55
For assistance call 1(800) 332-2119
Inputs
InputsName
INPUT and HDMI jacks:
Cable box, Cam(corder), CD, 
DVD (DVD, DVD2, Blu-ray), DVR, 
Game (Game, PS, Xbox, Wii), 
Media Box, PC, Satellite, AVR
On/Off (AN T, Bluetooth only)
INPUT jacks only:
CD/Audio, MP3 Player, VCR
HDMI jacks only:
PC, AVR, Delete
Lets you assign or •	change names of inputs appearing in the Input Selec-
tion menu.  Highlight an input and press ENTER multiple times to cycle 
through the name choices.
Lets you turn the •	Ant and Bluetooth inputs On/Off to display or hide them 
in the Input Selection menu; highlight the input and press ENTER to switch 
between On and Off.  A paired device is cleared from memory when the 
Bluetooth icon is turned off.
Lets you delete unused HDMI inputs from the •	Input Selection menu.
A CEC-enabled tuner can be named either •	Cable Box or Satellite.
A CEC-enabled DVD player can be named •	DVD, DVD2, or Blu-ray.
General Notes for the Inputs > Name Menu
When you change an input name and then exit the 
Name menu:
The name is changed•	
The icon in the •	Input Selection menu is changed
Audio and video settings are changed to the •	
defaults for the new device type.
265 Series:•	  All previous NetCommand IR “learn-
ing” for the input is erased.
Notes for HDMI devices
Disconnecting an HDMI device:•	  When you discon-
nect an HDMI device, the icon remains in the Input 
Selection menu until you remove it.  Select Delete in 
the Inputs > Name menu to remove an unwanted icon 
for an HDMI input.
If the •	New Device Found screen does not display 
as expected when you connect an HDMI device, 
see “Reactivating Auto Input Sensing for an HDMI 
Input,” page 15.
HDMI Control and CEC-Enabled Devices:•	  See 
Appendix C, “HDMI Control of CEC Devices,” page 
81.
If case of CEC conflicts:•	  Turn off CEC signals in 
one of these ways:
Turn off the TV’s HDMI Control signals to the  -
device (Inputs > HDMI Control menu).
Turn off each device’s internal CEC capability. -
See Appendix C for the TV’s HDMI Control or, to 
turn on/off a specific device’s response to CEC 
signals, see the device owner’s manual.
InputsLearn265 Series.  Sets up or changes NetCommand IR control of the current device.
See “About NetCommand IR Control,” page 60.
InputsAVR265 Series.  Sets up or changes NetCommand IR control of an A /V receiver.
See “NetCommand IR Control of an A /V Receiver” on page 67.
Inputs
HDMI 
Control
On, OffSelect On or Off to enable or disable the TV’s control of a CEC-enabled 
device.  See Appendix C for use of this feature.
 
						

							56 4.  TV Menus
For assistance call 1(800) 332-2119
Inputs, continued
InputsOrder
Lets you rearrange icons in the Input Selection menu.
Press 1.      to highlight an input icon.
2. Press ENTER to confirm the selection.
3. Press      to drag the icon to the desired position.
4. Press ENTER to confirm the new position.
InputsDemo
See demonstrations showcasing selected TV features.
 
						

							 4.  TV Menus 57
For assistance call 1(800) 332-2119
TV Locks
ParentalLock by Program Ratings
Restricts access using U.S.-based ratings 
sent by broadcasters.
TimeLock by Time
Restricts TV use by time of day.
ChannelLock by Channel
Blocks access to the channels you 
specify.
PanelLock Control Panel
Disables the buttons on the TV’s control 
panel.  Use this feature if small children 
in the home try to press buttons on the 
control panel.
OtherLock by Other Program Ratings
Restricts access using non-U.S.-based 
ratings sent by broadcasters.
Pass Code
Setting a Pass Code
You are prompted to enter a pass code whenever you 
select Lock on the main menu.  To set a pass code for 
the first time:
Press 1. MENU and highlight Lock.  A screen prompt-
ing you for a pass code will display.
Input a four-digit pass code using the number keys 2. 
on the remote control.
Press •	CANCEL to delete a number and move 
back one space.
Press •	MENU or EXIT to close the menu without 
setting a pass code.
Press 3. ENTER to confirm the pass code.
Resetting a Pass Code
See the procedure in Appendix B.
Bypassing TV Locks
If you try to watch a blocked program or channel •	
or the TV is locked by time, a notice will appear 
prompting you for a pass code.  To use the TV, 
input your four-digit pass code and press ENTER.
To reactivate the locks after using a pass code,  -
power the TV off and then on.
To reactivate only the parent ratings lock,  -
change to a different channel or device.
If a program is blocked, you can still use the TV •	
without entering a pass code.  Change to a channel 
airing an allowed program or change to another 
device.
Parental Menu
The TV comes from the factory with the rating locks 
turned off and with pre-set U.S. ratings TV-PG and 
movie rating PG.  You must turn on blocking for U.S. 
ratings to activate these rating restrictions.  Use the 
Lock > Parental menu to change the level of blocking 
with U.S. ratings.
Any time you change the channel or device, it may take 
up to five seconds for the rating restrictions to take 
effect.
Other Menu (Alternate Rating System)
This TV can recognize new rating systems that may 
come into effect in the future.  The Other menu allows 
you to block digital programming when such systems 
come into effect.  The Start Time and Stop Time 
options in the Parental menu apply to U.S.-based 
ratings only and do not affect alternate rating systems.
The first time you tune to a channel broadcasting an 
alternate rating system, the TV defaults to the most 
restrictive setting if the Lock menu > Other Lock 
option is set to On.  Use this menu to change the 
allowed rating if you are unable to watch a program 
rated with an alternate system.
Lock
Important Notes on Rating Locks
•	Parental menu rating locks apply only to chan-
nels and signals received on the ANT and com-
posite VIDEO jacks.
•	Other menu rating locks apply only to digital chan-
nels received on ANT.
•	 When	viewing	a	cable	box,	satellite	receiver,	
or other device connected to the component 
Y Pb Pr or HDMI inputs, check the device’s 
owner’s guide for parental locks.
 
						

							58 4.  TV Menus
For assistance call 1(800) 332-2119
Lock, continued
TV Program Ratings
TV Age-Based 
Ratings
T V-YYo u t h .  For children under 7.
T V-Y 7Youth 7 and older.
T V-GGeneral Audience.  For the entire family.
T V-PGParental Guidance.  Parental Guidance 
recommended; may not be suitable for 
some children.
T V-14Adolescent 14 and older.  Not recommended 
for children under 14.
T V-MAMature Audience.  For adults only.
TV Content Categories
FVFantasy Violence.  Applies to TV-Y7 only.
DSexual Dialog.  Applies in differing 
degrees to TV-PG and TV-14.
LAdult Language.  Applies in differing 
degrees to TV-PG, TV-14, and TV-MA.
SSexual Situations.  Applies in differing 
degrees to TV-PG, TV-14, and TV-MA.
VViolence (graphic or realistic).  Applies in dif-
fering degrees to TV-PG, TV-14, and TV-MA.
Movie Ratings
GGeneral Audience.  Designed for the 
entire family.
PGParental Guidance.  Parental Guidance 
recommended; may not be suitable for 
some children.
P G -13Parental Guidance, 13 and Older.  
Not recommended for children under 
13 .
RRestricted.  Restricted in theaters to 17 
years old and older unless accompanied 
by an adult.
N C -17No Children 17 or Under.  Restricted 
in theaters to 18 years old and older.
XAdult.  Designed for and restricted in 
theaters to adult audiences only.
Not 
Rated
No MPAA rating assigned
LockParental 
LockDisables or enables blocking based on V-Chip signals and the U.S. rating system.
TV RatingHighlight the rating level you wish to 
change and press ENTER to block it () or 
allow it ().
You can apply supplemental content 
blocking to the age-based ratings by 
using the TV content categories. (FV, D, 
L, S, V)
Movie 
RatingHighlight the rating level you wish to change and press ENTER to block it () or allow it ().  You 
can apply supplemental blocking to the age-based ratings by using the TV content categories below.
Start Time/
Stop TimeSets the time of day for enforcement of rating restrictions chosen in the Parental menu.  To make 
rating restrictions active 24 hours a day, make Start Time and Stop Time the same.
Highlight the start time or stop time.1. 
Press 2. ENTER to start editing.
Press 3.   to make changes.
Press 4. ENTER to confirm changes.
 
						

							 4.  TV Menus 59
For assistance call 1(800) 332-2119
Lock, continued
Lock Time 
Blocks all use of the TV during the time period you specify.  You must enter a pass code to 
use the TV when the time lock is in effect.  After releasing the lock with the pass code, the lock 
does not go back into effect until the next time the TV is powered on.
Lock by 
Time
Enables/disables Lock by Time.
Lock Time, 
Unlock 
Time
To set the lock and unlock times:
Highlight the lock or unlock time.1. 
Press 2. ENTER to start editing.
Press 3.   to make changes.
Press 4. ENTER to confirm changes.
Note: To make Lock by Time active 24 hours a day, make Start Time and Stop Time the same.
LockChannel
The Channel Lock menu lists channels currently in memory (see page 53).  Highlight a 
channel and press ENTER to lock () or allow () the channel.  Channels locks will be 
cleared the next time you perform a channel scan.
Lock  Panel
Off, OnOn locks and Off unlocks the buttons on the TV’s control panel.  Use this option if small children try 
to press TV buttons.
To  •	release the Panel Lock from the TV’s control panel, press and hold the INPUT button for ten 
seconds.  If the TV is powered off, press POWER after the lock releases to make the TV power on.
To reactivate the lock, return to this menu and change the setting to •	On.
LockOther
Other Menu Options (alternate rating system)
This TV can recognize new rating systems that may come into effect in the future.  Such alter-
nate rating systems will apply only to digital programming received on the ANT input.
LockOn, OffEnables/disables program blocking.
SystemThe rating system available for the channel
GroupRating groups available in the rating system shown on the screen.  Rating groups are defined by the 
rating system in effect.
RatingRating restrictions available in the selected rating system and group.  Highlight the rating and press 
ENTER to check (block) or uncheck (allow) rated content.
 
						

							60
For assistance call 1(800) 332-2119
5
NetCommand IR Control
NetCommand IR home-theater control is avail-•	
able on 265 series TVs.
IR emitter cables are available for purchase •	
from Mitsubishi.  Visit www.mitsuparts.com or call 
800-553-7278 and request one of the following:
242D483020 - (two-ended cable)
299P254020 - (four-ended cable).
NetCommand setup is optional.•	
You can perform NetCommand setup for a device •	
any time after the TV has detected the device.
NetCommand operates by sending remote control •	
signals from the TV to your other devices via the 
Important Note on NetCommand
Be sure to connect the IR emitter cable to the 
TV and properly place the emitters so that 
NetCommand can control your devices.
IR (infrared) emitters, telling the devices to play, 
record, change inputs, adjust volume, change chan-
nels, or perform other functions.  All this is accom-
plished with the TV’s remote control left in TV mode.
You may wish to use NetCommand IR control to •	
supplement control of CEC-enabled devices.
About NetCommand IR Control