Mitsubishi Electric Lt 40151 Owners Guide

61
6
NetCommand IR Control 
of an A/V Receiver
Controlling an A/V Receiver 
after NetCommand Setup
Switching Audio to and from the A/V 
Receiver
Press	1. MORE	and	then 9 (AUDIO).
Press	2. 	to	show	the	Speakers	option.
Press	3. 	to	select	either	AV Receiver	or	TV.
Controlling A/V Receiver Power
With Any Connection Type
Press	1. MORE	and	then 9 (AUDIO).
Press	2. 		to	show	the	Speakers	option.
Press	3. 	to	select	AV Receiver.
Point	the	remote	control	at	the	4. TV	(not	the	A /V	
receiver)	and	press	POWER	to...

62 6.  NetCommand Control of an A/V Receiver
I M P O R TA N T
To hear audio sent from the TV to the A /V receiver, 
you must have:
Physically connected the TV to the A /V •	
receiver.
Assigned, if needed, the name AVR if using an •	
HDMI A /V receiver.
“•	Learned” the IR codes for the A /V receiver 
inputs.
Assigned the TV’s audio output to the correct •	
input in the NetCommand Inputs > AVR menu.
Selected the A /V receiver as the audio source.  •	
Press MORE then 9 (AUDIO), then  	to show 
the Speakers...

 6.  NetCommand Control of an A/V Receiver 63
Automatic Switching (Audio or Audio/Video)
The	following	setups	enable	the	A /V	receiver	to	switch	
automatically	to	the	correct	input	when	you	select	a	
device	in	the	TV’s	Activity	menu.
Three	different	connection	arrangements	are	described	
here.		Review	the	descriptions	to	find	the	setup	needed	
for	your	equipment.
To hear digital surround sound from a source device 
you must use the setup described for Case 2.
To	set	up	control	of	an	A /V	receiver	you...

64 6.  NetCommand Control of an A/V Receiver
Setting Up A/V Receiver Control, continued
Case 2:  Automatic A/V Receiver Switching 
to a Surround Sound Device
Note:  Use this setup to send digital surround sound 
from a source device directly to your external sound 
system.  For non-surround sound source devices, 
Mitsubishi recommends using the setup for Case 1, 
in which audio is sent through the TV.
A	device	can	send	digital	surround	sound	such	as	Dolby	
Digital	or	DTS	 directly	 to	the	 A /V...

 6.  NetCommand Control of an A/V Receiver 65
Multiple video inputs through a single HDMI cable.  You can 
connect multiple video devices to an A/V receiver that has 
an HDMI output.  The optional audio connection allows you 
to hear, through the A/V receiver, devices connected to the 
TV only, e.g., an antenna on the ANT input.
AVR AUDIO OUTPUTRL
HDMI OUTDIGITAL
AUDIO INANALOG AUDIO INL R
High-denition 
DVD player
DVD player
Cable box
VCR
AUDIO
R
L
TV
A/V receiver with 
HDMI output
Any connection...

66 6.  NetCommand Control of an A/V Receiver
If	using	an	optional	audio	cable	between	the	TV	and	4. 
A /V	receiver,	connect	it.
Connect	the	IR	emitter	cable	to	the	TV	and	position	5. 
the	IR	emitter	where	it	can	send	signals	to	the	A /V	
receiver.		See	“IR	Emitter	Placement,”	page	56.
Setup to Control Automatic Audio 
and Video Switching via HDMI
When	this	setup	is	complete,	the	“learned”	A /V	receiver	
input	will	appear	in	the	TV’s	Activity	menu	as	a	select-
able	input.
Power	on	the	A /V	receiver.1....

67
Appendix A:  Programming the Remote Control ...........68
Appendix B:  HDMI Control of CEC Devices ..............75
Appendix C:  TV Care  ...........................78
Appendix D:  Bypassing the Parental Lock  ..............79
Appendix E:  Troubleshooting ......................81
Appendices
 

68 Appendices
This	appendix	explains	programming	the	TV’s	remote	
control	to	operate	other	A /V	devices.		This	is	distinct	
from	NetCommand	control.
Functions Available for Other A/V Devices
The	TV’s	remote	control	can	be	programmed	to	operate	
other	types	and	brands	of	A /V	products.	The	functions	
performed	in	each	switch	position	vary	depending	on	
the	product.		Not	all	functions	work	for	all	models.		The	
most	common	functions	available	are	listed	on	this	
page.
Control modes
VCRs and DVRs
•	CHANNEL...

 Appendices 69
Programming the Remote Control
Press	the	side	button	on	the	remote	control	to	1. 
change	to	the	correct	mode	for	the	product	you	
want	to	control.		Refer	to	the	table	below.		Only	
one	of	each	device	type	can	be	controlled	in	each	
mode.
ModeAffected Device
CA B L E / S ATCable	Box
DTV	Receiver
Satellite	Receiver
VCRVCR
DVR
DVD	Player/Recorder
DVDDVD	Player/Recorder
DVR
VCR
AUDIOA /V	Receiver
Audio	Amplifier
CD	Player
Press	and	hold	2. POWER	on	the	remote	control	for	
several	seconds	until...

70 Appendices
Programming Codes
Appendix A:  Programming the Remote Control, continued
Audio Amplifiers
Adcom41100,	40577
Altec	Lansing4174 2
Bel	Canto	
Design
415 8 3
Bose4 0 6 74
Carver40892
Cary	Audio	
Design
4187 9
Classe414 61
Flextronics4187 9
Halcro419 3 4
Harman/
Kardon
40892
JVC40331
Krell418 37
Left	Coast40892
Lexicon41802,	41145
Marantz40892
Mark	
Levinson
414 8 3
Parasound419 3 4
Philips40892
Polk	Audio40892
Victor40331
Yamaha40354
Cable Boxes
A-Mark10144,	10008
ABC10237,	10008
Acorn10 237...