Mitsubishi CP9800DW User Manual

8
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
4
5
2
1
3
3
1 11 1
1USB TERMINAL
Use to connect the USB cable.
See page 9.
2 22 2
2DIP SWITCHES
Use to set various functions of this unit. See page 10.
SIDE AND REAR PANEL
FEATURES AND FUNCTIONS
3 33 3
3HANDLE FOR TRANSPORTING
When transporting this unit, hold this handle and the upper
front part of this unit.
4 44 4
4POWER SOCKET (AC LINE)
Use to connect the provided power cord.  Insert the cord
firmly.
5 55 5
5POWER SWITCH...

9
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
CONNECTIONS
CONNECTION WITH USB DATA SIGNAL EQUIPMENT
To USB port
Personal computer Digital color printer
To USB port
2 22 2
2CONNECTING TO PERSONAL COMPUTER (EXAMPLE)
Connect this unit to a personal computer as shown below.
NOTE
A USB cable is not supplied with this unit. Use the USB 2.0 certified cable of 2 m or less in length.
Downloaded From ManualsPrinter.com Manuals 

10
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
SETTING OF DIP SWITCHES
2 22 2
2SETTING DIP SWITCHES
All the switches are set to OFF at the time of shipment from the factory.
Turn off the power before changing the DIP switch settings.
Switch No.SettingFunction
1 OFF Auto feed & cut mode
When the door is closed after the print paper is installed with this unit powered on,
this unit automatically carries out paper feed & cut operation.
ON Manual feed & cut mode
2 OFF Set...

11
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATION
TROUBLE-
SHOOTING
CONTENTS
BEFORE OPERATION
Before printing,
1 11 1
1 Install the print paper to this unit. (See below.)
2 22 2
2 
Position the adjustable paper guides. (See page 13.) 
3 33 3
3 Install the ink ribbon to this unit. (See page 14-15.)
INSTALLATION OF PRINT PAPER
Spacers
2For the usage of the spacers, see the Quick Setup Guide.
Remove the cushions put between the paper flange and spacer when
using the spacers.
How to attach the spacers...

12
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATION
TROUBLE-
SHOOTING
CONTENTS
4 44 4
4Install the print paper into the unit.
Make sure to install the print paper firmly.
NOTE
Install the print paper into the unit slowly.  If it is dropped along the ditches, the unit or
accessories may be damaged.
RollerPrint paper
5 55 5
5Remove the sticker, insert the print paper between the rollers as
shown right, and feed the print paper until it reaches the black
cover.
• Remove the sticker before inserting the...

13
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATION
TROUBLE-
SHOOTING
CONTENTS
BEFORE OPERATION
POSITIONING OF ADJUSTABLE PAPER GUIDE
The adjustable paper guides are attached on both sides of the metal shaft at the back of
the decurl roller.
Adjust the position of the print paper using these paper guides.
2 22 2
2HOW TO SHIFT THE ADJUSTABLE PAPER GUIDES
1 11 1
1Move the guide by pulling the tab.
2 22 2
2Release the tab and shift the guide until it is fixed into the groove
of the shaft.
2 22 2
2WHEN...

14
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATION
TROUBLE-
SHOOTING
CONTENTS
BEFORE OPERATION
INSTALLATION OF INK RIBBON
2 22 2
2 INSTALLING THE INK CASSETTE
1 11 1
1Place the ink cassette containing the ink ribbon in the position as
shown right.
Place the ink cassette on the print paper with the shaft (thicker one) around which the
ink ribbon is wound located to the front. Align the arrows marked on the sides of ink
cassette with those on the unit.
Place the rear of the ink cassette along the...

15
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATION
TROUBLE-
SHOOTING
CONTENTS
2 22 2
2Push the ink cassette toward the back of the unit.
Hold the handle of the ink cassette and push it straight toward the back of the unit.
Then raise it until you hear a click to secure it in the ink cassette holder.
NOTE
If the ink ribbon is used up, repeat the steps 1 to 2 to replace the print paper and the
ink ribbon.
CANCEL FEED&CUT
3 33 3
3Push the center of the door to close.
The print paper setting is...

16
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATION
TROUBLE-
SHOOTING
CONTENTS
BEFORE OPERATION
HANDLING OF PAPER / INK RIBBON SET
2 22 2
2 BEFORE PRINTING
• Fingerprints or dust on the paper’s printing surface may degrade the print quality and
cause paper jams. When the manual feed & cut mode has been selected, repeat the
FEED & CUT procedure three times after replacing the print paper.  When the print paper
with the post card printing on its reverse side is installed, repeat five times. If you omit...

17
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATION
TROUBLE-
SHOOTING
CONTENTS
INSTALLATION OF PRINTER DRIVER
2The printer driver is required to print the data from the personal computer connected with this
unit.
The printer driver for Windows
® is supplied with this unit.
2Refer to the PRINTER DRIVER GUIDE in the CD-ROM for installing the printer driver.
Microsoft, Windows, Windows 2000 and Windows XP are the registered trademarks of Microsoft
Corporation in the U.S.A. and other countries.
Product...