Mitsubishi CP9550DW User Manual

8
CONNECTIONS
OTHERS PRECAUTIONS
FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
AC  LINE
4
2
1
33
1 11 1
1USB TERMINAL
Use to connect the USB cable.
See page 9.
2 22 2
2DIP SWITCHES
Use to set various functions of this unit. See page 10.
SIDE AND REAR PANEL
FEATURES & FUNCTIONS
3 33 3
3HANDLE FOR TRANSPORTING
When transporting this unit, hold this handle and the lower
front part of this unit.
4 44 4
4POWER SOCKET (AC LINE)
Use to connect the provided power cord.  Insert the cord
firmly.
(LEFT SIDE)...

9
CONNECTIONS
OTHERS PRECAUTIONS FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
CONNECTIONS
CONNECTION WITH USB DATA SIGNAL EQUIPMENT
To USB port
Personal computer
Digital color printer
To USB port
2 22 2
2CONNECTING TO PERSONAL COMPUTER (EXAMPLE)
1 11 1
1 Connect the unit and the personal computer with a USB cable.
Connect this unit to a personal computer as shown below.
Downloaded From ManualsPrinter.com Manuals 

10
CONNECTIONS
OTHERS PRECAUTIONS FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
SETTING OF DIP SWITCHES
2 22 2
2SETTING DIP SWITCHES
All the switches are set to OFF at the time of shipment from the factory.
Turn off the power before changing the DIP switch settings.
Switch No.Setting Function
1OFF Auto feed & cut mode
When the door is closed after the print paper is installed with this unit powered on,
this unit automatically carries out paper feed & cut operation.
ON Manual feed & cut mode
2OFF Set...

11
CONNECTIONS
OTHERS PRECAUTIONS FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
BEFORE OPERATION
Before printing,
1 11 1
1 Install the print paper to this unit. (See below.)
2 22 2
2 Install the ink ribbon to this unit. (page 13-14)
INSTALLATION OF PRINT PAPER
Spacers
2The spacers are attached to the paper flanges. For the necessity of
the spacers, see the Quick Setup Guide.
Remove the cushions put between the paper flange and spacer when
use them.
How to attach and remove the spacers
1. Turn the spacer...

12
CONNECTIONS
OTHERS PRECAUTIONS FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
4 44 4
4Install the print paper into the unit.
Make sure to install the print paper firmly.
NOTE
Install the print paper into the unit slowly.  If it is dropped along the ditches, the unit or
accessories may be damaged.
RollerPrint paper
5 55 5
5Remove the sticker, insert the print paper between the rollers as
shown right, and feed the print paper until it reaches the black
cover.
•Remove the sticker before inserting the...

13
CONNECTIONS
OTHERS PRECAUTIONS FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
BEFORE OPERATION
INSTALLATION OF INK RIBBON
2 22 2
2 INSTALLING THE INK CASSETTE
1 11 1
1Place the ink cassette containing the ink ribbon in the position as
shown right.
Place the ink cassette on the print paper with the shaft (thicker one) around which the
ink ribbon is wound located to the front. Align the arrows marked on the sides of ink
cassette with those on the unit.
Place the rear of the ink cassette along the guides...

14
CONNECTIONS
OTHERS PRECAUTIONS FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
2 22 2
2Push the ink cassette toward the back of the unit.
Hold the handle of the ink cassette and push it straight toward the back of the unit.
Then raise it until you hear a click to secure it in the ink cassette holder.
NOTE
If the ink ribbon is used up, repeat the steps 1 to 2 to replace the print paper and the
ink ribbon.
CANCEL FEED&CUT
3 33 3
3Push the center of the door to close.
The print paper setting is...

15
CONNECTIONS
OTHERS PRECAUTIONS FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
BEFORE OPERATION
HANDLING OF PAPER / INK RIBBON SET
2 22 2
2 BEFORE PRINTING
•Fingerprints or dust on the paper’s printing surface may degrade the print quality and
cause paper jams. When the manual feed & cut mode has been selected, repeat the
FEED & CUT procedure three times after replacing the print paper.  When the print paper
with the post card printing on its reverse side is installed, repeat five times. If you omit...

16
CONNECTIONS
OTHERS PRECAUTIONS FEATURES
PREPARATIONTROUBLE-
SHOOTING
CONTENTS
INSTALLATION OF PRINTER DRIVER
2The printer driver is required to print the data from the personal computer connected with this
unit.
The printer driver for Windows
® is supplied with this unit.
2Refer to the PRINTER DRIVER GUIDE in the CD-ROM for installing the printer driver.
Windows
 98, Windows Millennium, Windows 2000 and Windows XP are the registered
trademarks of Microsoft Corporation in the U.S.A. and other...

17
CONNECTIONSPREPARATIONTROUBLE-
SHOOTING FEATURES PRECAUTIONS
OTHERS
CONTENTS
ERROR MESSAGES & COUNTERMEASURES
INDICATIONS ON THE FRONT PANEL AND COUNTERMEASURES
2If, for some reason, printing is not possible or an error occurs during printing, the indicators on the front panel will
illuminate or blink. In this case, follow the procedure described below.
In case of an error during printing, unless you turn off the unit, the unit resumes printing automatically when the error is
corrected.
ALARM Causes...