Home > Miele > Washing Machine > Miele W 3923 Wps Operating Instructions

Miele W 3923 Wps Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Miele W 3923 Wps Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 171 Miele manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							IRemove the laundry when the
    programme has finished
    In the anti-crease phase after the
    programme has finished, the following
    will appear alternately in the display:
    Cottons
    Anti-crease
    60°C 1600 rpm
    and
    :
    Programme finished
    Unload the drum
    before switching off
    ^Press theDoorbutton to open the
    drum door.
    ^Remove the laundry.
    Check that all items have been
    removed from the drum. Items left in
    the drum could discolour other items
    in the next wash or become
    discoloured themselves.^Check the folds in the door seal for
    any small articles, e.g. buttons, which
    might be lodged there.
    Important
    Alwaysremove the laundry before
    switching the machine off. This is
    important to ensure that the load size
    indicator works correctly.
    ^Turn the programme selector toStop.
    ^Switch the machine off with theI-On/
    0-Offbutton.
    ^
    Close the drum door. Otherwise there
    is the danger of objects being placed
    inadvertently in the drum. If these
    remained unnoticed and were
    washed in the next load, they could
    damage the laundry.
    How to wash correctly
    21
     
    						
    							Short
    For light to nomal soiling with no visible
    staining.
    The duration of the main wash is
    reduced.
    Water plus
    The water level in the main wash and
    the rinses will be increased if theWater
    plusoption is selected.
    Pre-wash
    For laundry with large amounts of dirt
    e.g. dust, sand.
    Further extras
    Soak
    For heavily soiled and stained items
    with protein stains (e.g. blood, fats and
    oils, cocoa).
    A length of time of between 30 minutes
    and 6 hours can be chosen in 30
    minute increments for the soak
    process.
    –
    To select the soak duration
    ^
    Press theFurther extrasbutton.
    Further extras
    8Soak
    ContinueOK
    ^
    SelectSoakby pressing the right
    handMenubutton underOK.You can now use the display to select
    the soak time you require.
    Soak duration
    Duration: 0:30 h
    IncreaseOK
    ^Each time the left handMenubutton
    underIncreaseis pressed, the soak
    duration is increased by 30 minutes.
    Confirm the duration required by
    pressing the right handMenubutton
    underOK.
    Further extras
    9Soak
    ContinueOK
    ^Press the left handMenubutton
    underContinueuntilBackappears
    in the display and confirm this with
    the right handMenubutton under
    OK.
    – To delete the soak time
    ^
    Press theFurther extrasbutton, and
    then the right handMenubutton
    underOKto switch offSoak.
    Rinse hold
    See the next page.
    Extra rinse
    An additional rinse cycle is carried out
    to achieve a better rinse result.
    Extra options
    22
     
    						
    							Final spin speed
    Programme rpm
    Cottons 1600
    Minimum iron 1200
    Delicates 600
    Woollens 1200
    Automatic 1200
    Shirts 600
    Express 1600
    Denim 900
    Hygiene 1600
    Dark garments 1200
    Curtains 600
    Pillows 1200
    Silks 400
    Sportswear 1200
    Outerwear 800
    Proofing 1000
    Drain / Spin 1600
    Separate rinse 1200
    Starch 1500
    You can reduce the final spin speed.
    However, you cannot select a final spin
    speed higher than that shown in the
    chart above.
    Rinse and interim spin
    There is a spin after the main wash and
    between the rinses. A reduction in the
    final spin speed will also reduce the
    interim spin speed. If a spin speed of
    less than 700 rpm is selected in the
    CottonsandHygieneprogrammes, an
    additional rinse is introduced.To omit the final spin (Rinse hold)
    ^Press theFurther extrasbutton and
    select theRinse holdsetting. The
    laundry will not be spun and will
    remain suspended in the final rinse
    water. This reduces creasing if the
    laundry is not going to be removed
    from the drum immediately after the
    end of the programme.
    –To start the final spin
    :
    The washing machine will display the
    maximum spin speed possible. You
    can select a spin speed lower than
    this. Start the final spin by pressing
    theStart/Stopbutton.
    – To end the programme
    :
    Press theDoorbutton. The water will
    drain away. Press theDoorbutton
    again to open the door.
    To omit rinse and interim spin and
    the final spin (No spin)
    ^
    SelectNo spinfrom the spin speed
    menu. The laundry is not spun after
    the final rinse. The water will drain
    away and the machine will go straight
    into the anti-crease stage. An
    additional rinse is introduced if this
    setting is selected with theCottons,
    Hygiene,Minimum iron,Expressand
    Automaticprogrammes.
    Spinning
    23
     
    						
    							With delay start you can choose when
    you want the programme to end. The
    start of a programme can be delayed
    from 30 minutes up to a maximum of 24
    hours, allowing you to make use of
    night-time economy electricity rates, for
    example.
    The current time of day needs to
    have been set for delay start to work
    correctly.
    To select delay start
    ASelect the programme you want and
    then press the+button.
    The display shows the start time: from
    xxx, the time for the programme to end:
    to xxx, and the current time.
    Delay start9:05
    from 9:05to 10:49
    ChangeBackA
    BUse the left handMenubutton under
    Changeto select the time you want
    the programme to end at.
    The first press on the button will adjust
    the programme end time to the next
    half or full hour. Each subsequent press
    on the button will delay the programme
    end time by 30 minutes.
    Delay start9:05
    from 16:16to 18:00
    ChangeOK
    CConfirm the time you require by
    pressing the right handMenubutton
    underOK.
    To begin delay start
    DPress theStart/Stopbutton.
    Cottons
    Start in:7:11h
    60°C1600 rpm
    The display will show when the
    programme will be started in hours and
    minutes.
    Delay start
    24
     
    						
    							To alter delay start
    You can subsequently select a later
    programme end time if you wish.
    ^Press the+button.
    Delay start9:05
    from 16:16to 18:00
    ChangeDelete
    ^Use the left handMenubutton under
    Changeto alter the time you want the
    programme to end at.
    ^Confirm by pressing the right hand
    Menubutton underOK.
    To delete delay start
    You can delete the delay start time and
    start the selected programme straight
    away.
    ^Press the+button.
    Delay start9:05
    from 16:16to 18:00
    ChangeDelete
    ^
    Press the right handMenubutton
    underDelete.
    ^
    Press theStart/Stopbutton to start
    the programme straight away.To cancel delay start
    ^Press theStart/Stopbutton.
    The following will appear in the display:
    Stopped:
    Cancel delay start
    Continue OK
    ^Confirm by pressing the right hand
    Menubutton underOK.
    ^Now you can select a different
    programme, or
    ^Press theStart/Stopbutton to start
    the programme straight away.
    The actual load size can only be
    determined accurately by the
    machine once the programme has
    started. The programme end time
    may, therefore, be a bit later or
    earlier than first indicated.
    Delay start
    25
     
    						
    							Cottons98E76* 30°C to 95°C Max. load 6.0 kg
    Fabric Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
    underwear, T-shirts etc.
    Extra options Pre-wash, Soak, Short, Water plus, Rinse hold, Extra rinse
    Note for test institutes:
    Short programme: 3.0 kg load andShortextra option
    Minimum iron
    43218E76*30°C to 60°C Max. load 3.0 kg
    Fabric Synthetics, mixed fibres and easy care cottons. If fabrics have a
    high proportion of man-made fibres, it is advisable to programme
    the machine for Gentle action. See Settings menu.
    Note Reduce the spin speed for fabrics which crease easily.
    Extra options Pre-wash, Soak, Short, Water plus, Rinse hold, Extra rinse
    Delicates4321ac* cold to 60°C Max. load 2.0 kg
    Fabric For delicate garments made of synthetic fibres, mixed fibres,
    rayon and easy care cottons.
    Extra options Pre-wash, Soak, Short, Rinse hold
    Woollens/ac* cold to 40°C Max. load 2.0 kg
    Fabric Machine-washable or hand-washable wool or wool blend fabrics.
    If the care label does not specify a temperature, wash using the
    cold setting.
    Extra option Rinse hold
    Automatic7621* cold to 40°C Max. load 3.5 kg
    Fabric Mixed loads of garments suitable for theCottonsandMinimum
    ironprogrammes. Sort according to colour.
    Note The wash parameters (e.g. water level, wash rhythm and spin
    speed) are adjusted automatically in this programme to ensure
    the best possible care and wash result for each item.
    Extra option Rinse hold
    Programme chart
    26
     
    						
    							Shirts cold to 60°C Max. load 2.0 kg
    Notes
    –Pre-treat collars and cuffs if necessary.
    –Wash silk garments in theSilksprogramme.
    Extra options Short, Water plus, Rinse hold
    Express76* cold to 40°C Max. load 3.0 kg
    Fabric Small loads of items which require freshening up and which can
    be washed in aCottonsprogramme.
    Extra options Water plus, Rinse hold, Extra rinse
    Denim cold to 60°C Max. load 3.0 kg
    Notes
    –Wash denim inside out.
    –Denim often contains excess dye and will run during the first
    few washes. Wash light and dark coloured items separately.
    Extra options Pre-wash, Soak, Short, Rinse hold
    Hygiene8* 60°C Max. load 6.0 kg
    Fabric Fabrics which will be in direct contact with the skin, e.g.
    underwear, nappies, towelling, bed linen, pillow and mattress
    covers.
    Note There is a longer temperature holding time in the main wash.
    Extra options Pre-wash, Soak, Water plus, Rinse hold, Extra rinse
    Dark garments cold to 40°C Max. load 3.0 kg
    Item Dark garments made from cotton or mixed fibres.
    Note Wash inside out.
    Extra options Short, Rinse hold
    Programme chart
    27
     
    						
    							Curtains cold to 40°C Max. load 2.0 kg
    Item Curtains, including net curtains, specified as machine-washable
    by the manufacturer. A pre-rinsewithoutdetergent is carried out
    automatically to remove dust.
    Note For curtains which crease easily, reduce the spin speed or
    deselect it.
    Extra options Water plus, Rinse hold
    Pillows 40°C to 60°C 2 pillows (40 x 80 cm) or
    1 pillow (80 x 80 cm)
    Item Washable pillows with feather, down or synthetic fillings.
    Note Please observe the instructions on the wash care label.
    Extra options Water plus, Rinse hold
    Silks/c* cold to 30°C Max. load 1.0 kg
    Fabric Silks and other handwashable fabrics with no wool content, e.g.
    satin, lace and silk.
    Note Place tights, bras etc. in a washing bag.
    Extra options Water plus, Rinse hold, Extra rinse
    Sportswear 30°C to 60°C Max. load 2.0 kg
    Item Lightly soiled sports garments which require washing or
    freshening up.
    Extra options Pre-wash, Soak, Short, Water plus, Rinse hold
    Programme chart
    28
     
    						
    							Outerwear cold to 40°C Max. load 2.0 kg
    Item Outerwear made from micro-fibres such as Gore-Tex
    ®,
    SYMPATEX®, WINDSTOPPER®etc.
    Notes
    –Zip up jackets before washing.
    –Do not use fabric conditioner.
    Extra options Pre-wash, Soak, Short, Water plus, Rinse hold
    Proofing 40°C Max. load 2.0 kg
    Item For treating microfibre fabrics, skiwear, fine, closeweave cotton
    garments (poplin) or tablecloths to provide a water and dirt
    resistant finish.
    Notes
    –The items should be freshly washed and spun or dried before
    proofing.
    – For best results, the items should be heat-treated afterwards,
    either in a tumble dryer or by ironing.
    Extra option Rinse hold
    Spin Max. load 6.0 kg
    Notes – Drain only: SelectNo spin.
    – Make sure you select the appropriate spin speed.
    Separate rinse Max. load 6.0 kg
    Extra option Rinse hold
    Starch Max. load 6.0 kg
    Note The laundry (table cloths, napkins, overalls) should be washed
    but not treated with fabric conditioner.
    Extra option Rinse hold
    * Please note that the buckets represent garment care label symbols. See
    Garment care label symbols.
    Programme chart
    29
     
    						
    							Main wash Rinses Spinning
    Water
    levelWash
    rhythmWater
    levelRinses Interim
    spinFinal spin
    Cottonsda(2-43)4)LL
    Minimum iron(ce2-3
    5)LL
    Delicatesede3–L
    Woollenseee2LL
    Automatic(abce2-35)LL
    Shirtsece2–L
    Expressdbd2-35)LL
    Denim(ce3–L
    Hygiene(b(3-44)LL
    Dark garments(bd3LL
    Curtains1)(dd3–L
    Pillows
    2)(de3–L
    Silkseee2–L
    Sportsweardcd2LL
    Outerwearede3L6)L
    Proofing(d–– –L
    Drain / Spin–––– –L
    Separate rinse––e2–L
    Starch(c–– –L
    d= Low water level
    (= Medium water level
    e= High water levela= Intensive rhythm
    b= Normal rhythm
    c= Gentle rhythm
    d= Sensitive rhythm
    e= Handwash rhythm
    See the following page for more information about the programme sequences.
    Programme sequence
    30
     
    						
    All Miele manuals Comments (0)

    Related Manuals for Miele W 3923 Wps Operating Instructions