Miele W 1514 Operating Instructions

							Display
The display is used for the following:
Selecting and displaying settings
–Temperature
–Spin speed
–Soak duration
–Delay start
–Cancelling a programme
–Safety lock
–Estimated programme durationSelecting programmes via the
display
With the programme selector at the
Further programmesposition, you can
select one of the following
programmes:
–Dark garments
–Curtains
–Pillows
–Sportswear
–Outerwear
– Proofing
– Separate rinse
Selecting extra options via the
display
By pressing theFurther extrasbutton,
you can select (depending on the
programme) the following extra options:
– Soak
–
Rinse hold
–
Extra rinse
Operating the washing machine
11
 
						

							Menubuttons
Various settings are made via theMenu
buttons.
They are used to alter or confirm the
value displayed above the vertical line.To alter a setting:
Cottons
Duration:1:49h
60°C 1600 rpm
Pressing the left handMenubutton
under60°Calters the temperature and
pressing the right handMenubutton
under1600 rpmalters the spin speed.
To confirm a setting:
Further programmes
Dark garments
ContinueOK
Pressing the left handMenubutton
underContinuecalls up further
programmes, and you can then confirm
your selection of the highlighted
programme by pressing the right hand
Menubutton underOK.
Operating the washing machine
12
 
						

							Before using the machine for the first
time ensure that it is correctly
installed and connected. See
Installation and connection. Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
This washing machine has
undergone a thorough functional test
in the factory and there will be some
residual water in the drum from this
process.
The washing machine has a sensor
which measures the amount of laundry
in the drum. This determines the
amount of detergent required. To allow
the load size indicator to function
correctly, you must first run a wash
programme without any laundry
and
without detergent
.
^Open the stopcock.
^
Press theI-On/0-Offbutton in.
If the washing machine is being
switched on for the first time, the
welcome screen will appear.
The welcome screen will appear in the
display every time the machine is
switched on until a programme lasting
longer than 1 hour has been
completed.
The display for setting the language will
then appear.Setting the language
You will be asked to select the
language you require for the display. It
is possible to change the language at
any time via theSettingsmenu.
Sprache
deutsch
.OK
^If the language shown is not the one
you want, select the language you do
want by pressing the left handMenu
button under
.. Confirm your
selection by pressing the right hand
Menubutton underOK.
Setting the time of day
The display for setting the time will then
appear.
12:00
Change OK
^
Select the hours you want by
pressing the left handMenubutton
underChange, and confirm this with
the right handMenubutton under
OK.
^
Then set and confirm the minutes.
Before using for the first time
13
 
						

							Reminder to remove transport struts
To avoid the risk of damage, the
transport struts must be removed
before the machine is used for the
first time. See Installation and
connection for instructions on how
to do this.
^After removing the transport struts (if
this has not already been done by
your fitter) press the right handMenu
button underOK.
Running your first programme
Your machine is now ready for the first
programme to be run.
15:00
Select programme
^Turn the programme selector to the
Cottonsposition.
^
Press theStart/Stopbutton.
^
At the end of the programme switch
the machine off.
Before you can use the washing
machine, the load sensor has to be
calibrated to zero as you would with
bathroom scales.Calibrating the load sensor to zero
^Switch on the washing machine.
^Open the drum door.
^Turn the programme selector to the
Cottonsposition.
^Press and hold theLoad/Detergent
button pressed in until the following
message appears in the display:
:
Zero setting
OK
^
Switch off the washing machine.
The machine is now ready for use.
Before using for the first time
14
 
						

							Energy and water consumption
–Water consumption and energy
usage are determined by the size of
the load.
To make the most out of your
machine, load the maximum dry load
for the programme you are using.
–Use theAutomaticandExpress
programmes for small loads.
–When smaller amounts of laundry are
washed using theCottons
programme, the automatic load
recognition system will reduce the
amount of water, time and energy
used. This may mean that the time
left shown in the display is adjusted
during the course of the wash
programme.
– Using theCottons 60°Cprogramme
instead of theCottons 95°C
programme will give energy savings
of between 35% and 45%. This is
sufficient for most levels of soiling.
For stubborn or old stains, use the
Soakextra option.Detergent
–Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
–Adjust the dosage to the degree of
soiling of the laundry.
–Reduce the amount of detergent for
smaller loads. Use theLoad/
Detergentbutton.
Choosing the correct Extra option
(Short, Soak, Pre-wash)
Select:
– A wash programme together with the
Shortextra option for light to normal
soilingwhere there are no obvious
marks.
– A wash programme without any extra
options for normal to heavy soiling
with visible staining.
– A wash programme together with the
Soakextra option for heavily soiled
laundry.
–
ThePre-washextra option for laundry
with large amounts of dirt(e.g. dust,
sand).
When drying with a tumble dryer
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
Washing environmentally and economically
15
 
						

							Brief instructions
The headings numberedA,B,C,...
show the operating sequence and can
be used as brief instructions.
ASort the laundry
^Empty all pockets.
,Foreign objects (e.g. nails,
coins, paper clips, etc.) can cause
damage to garments and
components in the machine.
^
Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft colourfast cloth. Do not rub!
Badly soiled areas can be pre-treated
with liquid detergent, stain removers
etc. first, following the manufacturers
instructions. With particularly stubborn
stains ask your dry cleaner for advice.
,If you use a solvent-based clean
-
ing agent (e.g. one containing ben
-
zene) to pre-treat a stain, make sure
that any plastic parts (e.g. buttons)
are protected, and that the cleaning
agent is rinsed off before washing the
garment in the machine.
,Do not use solvent-based
cleaning agents in this machine.
^Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
Dark textiles often contain excess dye
and should be washed separately
several times before being included in
a mixed load. Always wash whites and
coloureds separately.
– Curtains: Remove lead weights first
or place in a laundry bag.
–
Underwiring and collar stiffeners:
Any loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
–
Knitted garments, trousers and
jeans, T-shirts and sweat shirts: Turn
inside out, if recommended by the
manufacturer.
–
Close any zips, fasten hooks and
eyes etc before washing.
–
Fasten duvet covers etc. to prevent
small items from being rolled up
inside them.
Do not wash any items in this machine
which are specified by the
manufacturer asnot washableon the
care label. (hsymbol)
How to wash correctly
16
 
						

							BSwitch on the washing machine
The interior drum lighting will come on.
The programme selector will light up
and the display will ask you to select a
programme.
CSelect a programme
^Turn the programme selector to the
required programme.
The programme selected will appear
in the display.DSelect a temperature / spin speed
The suggested temperature and/or spin
speed can be changed if required.
Cottons
Duration:1:49h
60°C 1600 rpm
^By pressing the left handMenu
button under60°Cyou can alter the
temperature, and by pressing the
right handMenubutton under
1600 rpmyou can alter the spin
speed.
When you turn the programme selector
toFurther programmes, these will
appear in the display.
Further programmes
Dark garments
ContinueOK
^Pressing the left handMenubutton
underContinuecalls up the further
programmes, and you can then
confirm your selection of the
highlighted programme by pressing
the right handMenubutton under
OK.
Dark garments
Duration:1:15h
40°C 1200 rpm
^
The suggested temperature and/or
spin speed can now be changed if
required.
How to wash correctly
17
 
						

							^Select any extra options by pressing
the appropriate button. The relevant
indicator light will come on to show
which extra option has been
selected.
^Press theFurther extrasbutton to
select the following extra options
(depending on the programme
selected):Soak,Rinse holdandExtra
rinse.
Not all the extra options are suitable for
use with every programme.
You can only select extra options which
are compatible with the basic
programme being used.
ELoad the drum
^
Press theDoorbutton to open the
drum door.
The load size indicator display will
appear.
Load 
						

							FAdd detergent
When the door is closed, the load size
indicator will be replaced with the
detergent percentage display.
Detergent 75%
ABackA
The percentage shown relates to the
amount of detergent recommended by
the manufacturer on the packaging.
40%= Add slightly less than half
the amount recommended
50%= Add half the amount
recommended
60%= Add slightly more than half
the amount recommended
75%= Add three quarters of
the amount recommended
100%= the full amount of detergent
recommended
You also need to take the level of
soiling and water hardness into
account.It is important to dispense the correct
amount because...
. . . too little detergent results in:
–Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
–Greasy particles clinging to the
laundry.
–Limescale deposits on the heater
elements.
. . . too much detergent results in:
–Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
– High water consumption (an
additional rinse cycle will
automatically switch in).
– A burden to the environment.
How to wash correctly
19
 
						

							^Pull out the detergent drawer and
add detergent to the compartments
as follows:
i
Detergent for the pre-wash (divide
the total recommended amount as
follows: add
1/3to compartmenti
and2/3to compartmentj)
j
Detergent for the main wash,
including Soak if selected
§
Fabric conditioner or liquid starch
^
Close the detergent drawer.
See Detergent for further information.GSelect Delay start (if required)
^Press the+button to set the time
you wish to programme to end at.
See Delay start for more information.
HStart the programme
^Press the flashingStart/Stopbutton.
If a delay start time has been set, then
this will count down in the display. At
the end of the delay start time or
immediately after the programme has
started (if no delay start time has been
selected) the estimated programme
duration will appear in the display.
During the first 8 minutes the machine
measures how much water is being
absorbed by the laundry. The
programme duration may be longer or
shorter depending on this absorbency
rate.
The programme sequence is also
shown in the display. The machine lets
you know which section of the
programme has been reached.
The drum lighting switches off once the
programme has started.
How to wash correctly
20