Miele S5211 Owners Manual

When to change the battery in
the radio-operated handle
Approx. every 18 months. One 3 V
battery (CR 2032) is required.
The vacuum cleaner can still be
used when the battery has run out or
if there is no battery fitted.
Switch the vacuum cleaner on using
the On/Off foot control. The
vacuum cleaner is ready to use (in
stand-by mode).
Press the re-set button for the
exhaust filter change indicator.
The vacuum cleaner can continue to be
used, but only at maximum power.
How to change the battery in
the...

When to change the thread
lifters
The thread lifters on the suction inlet of
the floorhead can be replaced.
Check them from time to time if the pile
has worn down.
Replacing the thread lifters
Use a suitable screwdriver to remove
the thread lifters from the slots. There
are two grooves to help you.
Fit new thread lifters.
Upholstery nozzle, 190 mm
(supplied as standard, depending on
model)
Disengage the thread lifter unit at
each side of the upholstery nozzle
using a coin.
Fit a new thread lifter...

Warning: Always disconnect the
vacuum cleaner from the electricity
supply for maintenance work and for
cleaning. Switch off at the wall
socket and remove the plug.
Vacuum cleaner and accessories
External surfaces of the vacuum
cleaner and of the accessories can be
cleaned with a dry or a slightly damp
cloth, or with a proprietary cleaner
suitable for plastic.
Do not use abrasive cleaning
agents, glass cleaning agents,
all-purpose cleaners or oil-based
conditioning agents.
Dust compartment
The dust...

The vacuum cleaner switches off
automatically.
On certain models, the overheating
warning light also comes on.
A temperature limiter switches the
vacuum cleaner off automatically if it
gets too hot. Some models also have a
warning lightwhich comes on to
indicate that it has overheated.
This can occur if, for instance, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of...

In the event of a fault that you cannot
easily remedy, please contact
–your Miele Dealer
or
–Miele (see back cover for contact
details).
Please note that telephone calls may
be monitored and recorded for
training purposes (UK only).
After sales service
35 

It is important to observe the flooring
manufacturers cleaning and care
instructions.
Miele accessories, including
floorheads, filters and dustbags, are
available to order through your Miele
Dealer, Miele or online at:
Certain models are supplied as stan
-
dard with one or more of the following
accessories:
Electrobrushes
Electrobrushes can only be used on
models fitted with an electrobrush socket.
Electrobrush Electro Comfort
(SEB 216-3)
Electrobrush Electro Comfort SEB 216-3
is particularly suitable...

Other accessories
MicroSet (SMC 20)
This set is specially designed for
cleaning small objects and difficult to
reach areas (such as PC keyboards,
stereo equipment, intricately carved
furniture and ornaments, models etc).
CarCare Set (SCC 10)
For valeting the interior of cars.
Cat&Dog Set (SCD 10)
Especially for households with pets.
HomeCare Set (SHC 10)
Accessories for cleaning the living
areas of your home.
Hand Turbobrush Turbo Mini
Compact (STB 20)
For cleaning upholstery, mattresses,
car seats etc....

All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with current
national and local safety regulations
(BS 7671 in the UK).
The voltage and frequency are given on
the data plate located underneath the
vacuum cleaner. Please ensure that
these match the household mains
supply. The fuse rating is quoted on the
plug.
The appliance is supplied with a cable
and moulded plug ready for connection
to a 230-240 V/50 Hz a.c. single phase
supply.
Non-rewireable...

39 

Alteration rights reserved / S 5000 / 2112M.-Nr. 07 914 980 / 04