Miele S 711 Manual

Attaching the floorhead
^Push the suction tube into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into
position.
^To release the floorhead from the
suction tube, press the locking button
(see arrow) and pull the suction tube
away from the floorhead.
The floorhead can be used for all
normal cleaning of carpets and rugs.
It can also be used with the brush
protruding to vacuum hard flooring. For
hard flooring, such as stone and
parquet, we recommend using one of
the special Miele...

Accessories supplied
Other tools, in addition to the
floorhead(s), are supplied with the
vacuum cleaner to help deal with
various types of cleaning.
aCrevice nozzle
bCrevice nozzle extension (depending
on model)
cDusting brush
dUpholstery nozzle
eFilter grille
The filter grilleeis supplied separately
in the box only with those models which
are fitted with an ACTIVE air clean or
ACTIVE HEPA exhaust filter as stan-
dard. The filter grille is required if you
wish to replace one of these filters with
a SUPER...

To open the accessories
compartment
^Press the release button and the lid
will open.
^Take out the accessory you require.
^Press down firmly on the lid to close
it.
S 812 - S 849 series accessories
compartment
The extension for the crevice nozzle is
located in the compartment underneath
the crevice nozzle.
Preparing for use
13 

The different tools can either be fitted to
the hand-piece or, as required, to the
suction tube.
Floorhead
For general use and also for cleaning
stairs.
Crevice nozzle
For cleaning in folds, crevices or
corners.
Crevice nozzle extension
(depending on model)
This accessory can be used to extend
the length of the crevice nozzle. Further
length is provided by pulling out the
inner section.
^
Press the locking button to pull the
extension piece out or to push it in.
Using the accessories
14 

Dusting brush
For cleaning skirting boards, ornate or
carved articles, etc. The head of the
dusting brush can be swivelled to attain
the best cleaning position.
Upholstery nozzle
For cleaning upholstery, mattresses,
cushions, curtains, covers etc.
Using the accessories
15 

Unwinding and rewinding the
mains cable
Unwinding
^Hold the plug and unwind cable to
the required length:
–S 560 - S 578: max. approx. 6.5 m
–S 711 - S 749: max. approx. 6.5 m
–S 812 - S 849: max. approx. 8.5 m
,If vacuuming for longer than 30
minutes, the mains cable must be
pulled out to its fullest extent.
Otherwise there is a danger of
overheating and damage.
Rewinding
^Switch off at the wall socket and
remove the plug.
^Press the rewind switch. The cable
will rewind automatically.
Auto-reverse...

Switching on and off
^Press the On-Off switch.
Vacuuming
^When vacuuming pull the cleaner
behind you on its wheels. You can
stand it upright for vacuuming stairs
and curtains etc.
,When vacuuming especially fine
dust, e.g. sawdust, sand, plaster,
flour, talcum powder etc.,
electrostatic charges build up
naturally. Under certain conditions
these charges will be released. To
avoid the unpleasant effects of these
discharges, a metal inlay has been
incorporated into the underside of
the handle.
Please make...

Regulating the suction
The suction power can be regulated to
suit the type of flooring. The higher the
wattage the more powerful the suction.
Reducing the suction power reduces
the amount of effort required to
manoeuvre the floorhead. Setting the
suction power selector according to the
degree of soiling and type of flooring
being cleaned will save energy. Smooth
or lightly soiled flooring is easily
cleaned using the Economy setting.
Fitted carpets and thick pile carpets
require the most powerful setting...

Rotary selector
^Turn the rotary selector manually to
the suction power setting you require.
Slide selector
^
Move the slide selector manually to
the suction power setting you require.
Operation
19 

+ / - controls
Press the controls to select the suction
power you require.
^Press the
+control to select a higher
setting.
^Press the
-control to select a lower
setting.
When switched on the vacuum cleaner
operates at the power setting last used.
A single short press on the control
moves the suction power up or down
one setting at a time. If the control is
held down, the suction power setting
will automatically move through the
power settings until the control is
released.
+ / - controls with Automatic...