Miele Kfn 9753 Id Operating And Installation Instructions

In the event of a fault which you cannot
easily fix yourself, please contact the
Miele Technical Service Department at
the address on the back of this booklet.
When contacting the Technical Service
department, please quote the model
and serial number of your appliance
given on the data plate inside the
appliance.
After sales service
31
 

32
 

Installation instructions
To prevent accidents
and machine damage
read these instructions
before
installation or use.
 

Disposal of packing materials
The cardboard box and packing
materials are biodegradable and
recyclable. Please recycle.
Ensure that any plastic wrappings,
bags, etc., are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Disposal of an old appliance
Old appliances contain materials that
can be recycled. Please contact your
local recycling center about the
possibility of recycling these materials.
Before discarding an old appliance,
disconnect it from the...

,Avoid the risk of electrical shock
- Plug into a grounded 3-prong
outlet.
- Do not move the ground plug.
- Do not use an adapter.
- Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
Improper connection of the
equipment grounding conductor
may result in electric shock.
If you are in any doubt as to whether
the appliance has been properly
grounded, have the appliance
checked by a qualified electrician or
service technician.
Installation,...

Have the appliance installed by a
qualified technician, according to
the enclosed installation instructions.
The manufacturer is not liable for
damage to property due to an
incorrect installation.
,WARNING
This appliance is top-heavy and
must be secured to prevent it from
tipping forward.
Installation site
The appliance should be installed in a
dry, well-ventilated room.
Do not install the appliance:
- outdoors
- in an environment with dripping
water
- in rooms that are at risk of frost.
The installation...

Ventilation
The air at the rear wall of the appliance
gets warm. Therefore sufficient space
must be provided around the appliance
for ventilation.
A ventilation gap of at least 1 1/2
(38 mm) must be provided behind the
appliance.
The air intake to the appliance is made
through the base of the installation
niche. The ventilation cross-section
must be at least 78 3/4 in
2(200 cm2)to
ensure that the warm air can escape
without obstruction.
The air intake and outlet must not be
blocked or covered in any way....

Freezer section height Niche height
AB
KFN 9753 iD695 (27 3/8) 1772 - 1788 (69 3/4 - 70 3/8)
Installation Dimensions
38
 

The door hinges are pre-adjusted so
that the appliance doors can be
opened wide.
By adjusting the hinges the doors can
be modified so they do not open as far.
For example, when the door is opened
if an adjacent wall or piece of furniture
is in the way, the door angle should be
limited to 90°.
^Insert the pins (supplied) into the
hinges from above.
This will limit the opening angle of the
appliance door to 90°.If you would like to cushion the doors
for a more gentle opening, you can
increase the spring...

Before installing the appliance, you will
need to decide which side of the door
you would like hinged. For and
left-handed door hinge, follow the
instructions below.
Tools needed:
–a Philips head screwdriver,
–a flathead screwdriver,
–various sizes of Torx screwdrivers,
–an open-ended wrench.
^Open the appliance doors.
^
Using a flathead screwdriver, lift and
remove the coversa,bandc,as
well as the plugsd.^Slightly loosen the fastening screws
eat the top, middle and bottom.
^Slide the appliance doors...