Miele Kfn 8767 Sed Operating And Installation Instructions

							Do not allow children to play with
the appliance, for example to climb
inside the drawers or to swing on the
door.
Do not refreeze thawed or partially
thawed food. Defrosted food
should be used up as quickly as
possible, as food soon loses its
nutritional value and goes off. Defrosted
food may only be re-frozen after it has
been cooked.
Do not store explosive materials in
the appliance or any products
containing propellants (e.g. spray
cans). Thermostats switching on may
produce sparks which could present a
fire hazard. Flammable compounds
could explode.
Do not use any electrical
equipment in this appliance, e.g.
ice cream makers. Danger of sparking
and explosion!
If storing alcohol with a high
percentage proof, make sure it is
tightly closed and stored upright.
Danger of explosion.
Do not store cans or bottles
containing carbonated drinks or
liquids which could freeze in the
freezer. The cans or bottles could
explode. Danger of injury and damage
to the appliance.
When cooling drinks quickly in the
freezer, make sure bottles are not
left in for more than one hour;
otherwise they could burst. This could
result in injury or damage.
Observe the use by dates given
on food to avoid the risk of food
poisoning.
Storage times will depend on several
factors, including the freshness and
quality of the food as well as the
temperature at which it is stored. Follow
the instructions given on food
manufacturer’s packaging on storage
conditions required as well as the use
by date.
Do not use sharp edged objects to
–remove frost and ice,
– separate frozen foods and remove
ice trays. They will damage the
evaporator, causing irreversible
damage to the appliance.
Never place electric heaters or
candles in the appliance to defrost
it. These can damage the plastic parts.
Do not use defrosting sprays or
de-icers, as they might contain
substances which could damage the
plastic parts or which could cause the
build-up of gases and pose a danger to
health.
Do not use any oils or grease on
the door seals, as these will cause
the seals to deteriorate and become
porous with time.
Do not allow grease or oil from
foods placed in the refrigerator to
spill or come into contact with plastic
surfaces. Do not store cooking oil in the
refrigerator door. Traces of oil can
cause stress cracks to occur in the
plastic components in the door.
Warning and Safety instructions
11
 
						

							Do not block the ventilation gaps in
the appliance as this would impair
the efficiency of the appliance, increase
the electricity consumption and could
cause damage to the appliance.
The appliance is designed for use
within certain climate ranges
(ambient temperatures), and should not
be used outside this range. The climate
range for your appliance is stated on
the data plate inside the appliance.
Installing it in a room with too low an
ambient temperature, e.g. a garage,
can lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
Do not use a steam-cleaning
appliance to defrost or clean this
appliance. Pressurised steam could
reach the electrical components and
cause a short circuit.
In countries where there are areas
which may be subject to infestation
by cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
Disposal of your old appliance
Before disposing of an old
appliance, first make the door latch
or lock unusable.
This way you will prevent children from
accidentally locking themselves in and
endangering their lives.
Disconnect it from the mains. Cut
off the cable and render any plug
unusable.
Be careful not to damage any part
of the pipework whilst awaiting
disposal, e.g. by
– puncturing the refrigerant channels
in the evaporator.
– bending any pipework.
– scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
Warning and Safety instructions
12
 
						

							Normal energy consumption Increased energy
consumption
Installation siteIn a ventilated room. In an enclosed, unventilated room.
Protected from direct sunlight. In direct sunlight.
Not situated near to a heat source
(radiator, oven).Situated near to a heat source
(radiator, oven.
Where the ambient room
temperature is ideal at approx.
20°C.Where there is a high ambient
room temperature.
Temperature setting with
a thermostat which is
approximate (set in
stages).With a medium setting of 2 to 3. With a high setting: The lower the
temperature in the freezer, the
higher the energy consumption.
Temperature setting with
a thermostat which is
exact to the degree
(digital display).Cellar section 8 to 12°C On appliances with winter setting,
please make sure that the winter
setting is switched off when the
ambient temperature is warmer
than 16 °C.
Refrigerator section 4 to 5 °C
StayFresh zone just above 0 °C
Freezer section -18°C
UseOnly open the door when
necessary and for as short a time
as possible.Frequent opening of the door for
long periods will cause a loss of
coldness.
Store food in an organised way. If food is not stored in an
organised way, searching for an
item will mean the door is open for
longer.
Allow hot food and drinks to cool
down before placing them in the
appliance.Placing hot food in the appliance
will cause the compressor to run
for a long time, as the appliance
will have to work harder to lower
the temperature.
Store food covered or packaged. The evaporation or condensation
of liquids will cause a loss of
coldness in the refrigerator.
Place frozen food in the
refrigerator to defrost.
Do not over-fill the appliance to
allow air to circulate.
How to save energy
13
 
						

							Normal energy
consumptionIncreased energy
consumption
DefrostingDefrost the freezer when a layer of
ice one centimetre thick has built
up.A layer of ice hinders the cold
from reaching the frozen food, and
causes an increase in energy
consumption.
How to save energy
14
 
						

							Before using for the first time
The stainless steel surface and the
shelf trims have a protective cover to
prevent scratching during
transportation.
^Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^Polish stainless steel surfaces using
a suitable cleaning agent following
the manufacturer’s instructions on the
packaging.
^Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hour after
transporting it to its final location
before connecting it to the mains.
Switching on
The refrigerator section/Stayfresh zone
and freezer section are switched on
together by pressing the master switch
on the right hand side of the control
panel, or by pressing the On/Off button
on the left hand side of the control panel.
^
Press the master switch on the right
hand side of the control panel.
The refrigerator section temperature
display lights up.Bars light up in the freezer section
temperature display.
The appliance starts cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Cool pack
Place the cool pack in the top freezer
drawer or to save space on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
To switch the refrigerator section /
StayFresh zone off separately
The refrigerator section/StayFresh zone
can be switched off without having to
switch off the freezer section. This is
useful e.g. whilst on holiday.
^
Press the refrigerator
section/StayFresh zone On/Off button
on the left hand side of the control
panel.
The temperature display for the
refrigerator section goes out, and the
refrigerator section/StayFresh zone is
switched off.
Switching on and off
15
 
						

							To switch the refrigerator section /
StayFresh zone back on again
^Press the On/Off button on the left
hand side of the control panel again.
The refrigerator section temperature
display lights up. The refrigerator
section/StayFresh zone starts
cooling. The interior light will come on
when the door is opened.
Safety lock
The safety lock can be activated to
prevent the appliance being switched
off inadvertently.
Activating or de-activating the safety
lock
^Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light flashes,
and
;flashes in the temperature
display.
^
Press the Super freeze button again.
;will light up in the display.
^
You can now choose between
;0
and
;1by pressing the temperature
selector buttons:
0: the safety lock is de-activated,
1: the safety lock is activated.^Press the Super freeze button to save
the setting.
The safety lock indicator light
Xwill
light up when the safety lock has been
activated.
^Press the master switch on the right
hand side of the control panel to
come out of the setting mode.
Otherwise, the electronics will revert to
normal operation after a couple of
minutes.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,
^switch the appliance off,
^
switch off at the wall socket and
withdraw the plug,
^
clean the appliance out and
^
leave the doors ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the doors are left
shut, there is a danger of mould and
odours building up inside the
appliance.
Switching on and off
16
 
						

							It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
The temperature in the appliance will
rise:
–the more often the door is opened
and the longer it is kept open,
– if too much food is stored in it at
once,
– the warmer the food is which is being
put into it,
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
. . . in the refrigerator section
and in the StayFresh zone
We recommend a temperature of4 °C
in the refrigerator section.
The temperature in the StayFresh zone
is controlled automatically, and is
maintained at0 to 3 °C.
. . . in the freezer section
To freeze fresh food and to store frozen
food for a long time, a temperature
colder than-18 °Cis required. At this
temperature the growth of
micro-organisms is generally halted. As
soon as the temperature rises above
-10 °C, the micro-organisms become
active in the food again so that it cannot
be kept as long. For this reason,
partially defrosted or defrosted food
must not be re-frozen. Food may be
re-frozen once it has been cooked, as
the high temperatures achieved when
cooking destroy most micro-organisms.
Temperature selection
Use the two buttons underneath the
temperature display to set the
temperature for the refrigerator and
freezer sections.
Press the
left hand button: to raise the
temperature (it gets warmer)
right hand button: to reduce the
temperature (it gets colder)
The temperature being set will flash in
the display.
The correct temperature
17
 
						

							When pressing the buttons, the
following information shows in the
display:
–When first pressed, thelast
temperature selectedflashes.
–Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
–Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button the currentaverage
temperature of the refrigerator section
is automatically shown.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very fullandfor
approx. 24 hours if the appliance is
fullbefore checking the temperature
display, as it will take this long for the
display to give an accurate reading. If,
after this time, the temperature is still
too high or too low, you will need to
adjust it again.
Temperature range
The temperature can be adjusted:
–
In the refrigerator section from 4 °C
to 9 °C
–
In the freezer section from -16 °C to
-26 °C.
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.Setting the temperature in the
StayFresh zone
The temperature in the StayFresh zone
is automatically held at 0 to 3 °C. It can
be raised or lowered, e.g. if you want to
use it for storing items like fish.
^Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light will
start flashing, and a
;will flash in the
temperature display.
^Press one of the temperature selector
buttons repeatedly until a
=appears
in the display. Then press the Super
freeze button again.
=lights up in the display.
^
You can now adjust the temperature
in the StayFresh zone by pressing the
temperature selector buttons. You
can choose from settings1to9:
1: lowest temperature,
9: highest temperature.
=5is the default setting for the
StayFresh zone. If a setting of
=1to
=4is selected, the temperature can
fall below 0°C. Food could freeze!
^
Press the Super freeze button to save
the setting.
The correct temperature
18
 
						

							^Press the master switch on the right
hand side of the control panel to
come out of the setting mode.
Otherwise the electronics will revert
to normal operation after a couple of
minutes.
Temperature display
During normal operation the
temperature displays on the control
panel show the temperature in the
middle of the refrigerator section and
the temperature in the warmest part of
the freezer section.
If the temperatures in the appliance are
not within the range that the appliance
is able to display (above 0 °C in the
refrigerator section, and below 0 °C in
the freezer section), only bars will light
up in the temperature displays.
Thetemperature displays flash, if
– a different temperature is being set,
– the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
This loss of coldness is no cause for
concern in the following circumstances:
– when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
–
when fresh food is being frozen.
However, if the temperature in the
freezer section remains above -18 °C
for a long time, check that the frozen
food has not started to defrost. If it has
started thawing, check that the food is
safe to use and if it is, use it as quickly
as possible.
The correct temperature
19
 
						

							Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
The level of brightness can be
adjusted:
^Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light flashes
and a
;flashes in the temperature
display.
^
Press one of the temperature selector
buttons repeatedly until a
^appears
in the display.
^
Then press the Super freeze button
again.
A
^lights up in the display.
^
You can now adjust the level of
brightness by pressing the
temperature selector buttons. You
can choose from settings1to5:
1: lowest setting,
5: brightest setting.
^
Press the Super freeze button to save
the setting.^Press the master switch on the right
hand side of the control panel to
come out of the setting mode.
Otherwise the electronics will revert
to normal operation after a couple of
minutes.
The correct temperature
20