Miele Kfn 14943 Sd Operating And Installation Instructions

~Do not use defrosting sprays or
de-icers.
They may cause a build-up of
potentially explosive gasses or contain
substances that can damage the
plastic or that could pose a danger to
health.
~Do not use any oils or grease on the
door seals.
They can cause the seals to deteriorate
over time.
~If you store fatty or oily foods in the
appliance or the appliance door, make
sure that no oil or grease leaks onto the
plastic parts of the appliance.
This can cause the plastic to crack and
break.
~Do not block the...

Normal energy consumption Increased energy consumption
Installation siteIn a well ventilated room. In an enclosed, poorly ventilated
room.
Protected from direct sunlight. In direct sunlight.
Away from heat sources (radiator,
stove/oven).Near heat sources (radiator,
stove/oven).
When the room temperature is
ideal (approx. 20 °C (68 F)).When the room temperature is
high.
Temperature setting (dial)At a medium setting of 2 to 3. At a high setting: The lower the
temperature in the appliance, the
more energy...

Before first use
The stainless steel surfaces on the
inside and outside of the appliance are
covered with protective sheeting.
^Do not remove the protective
sheeting until the appliance has been
installed in its final location.
^Wipe the stainless steel surfaces
of the appliance with the enclosed
stainless steel cleaning agent directly
after removing the protective
sheeting.
Important! The stainless steel
cleaning agent provides a durable
protective film that prevents rapid
soiling of the surface!
^Clean...

Use this button to switch back and forth
between the refrigerator section and
the freezer section.
If you want to select the freezer section
(e. g. to check the temperature),
^tap the button to switch from the
refrigerator section to the freezer
section; the Freezer symbol will light
up yellow.
Depending on the selected
temperature zone, you can
– either select the DynaCool function,
–
the Super Cool / Super Freeze
functions or
–
adjust the temperature.
For additional information, please see
the...

That section is now switched off, while
the other section remains on.
To switch a section back on again,
^select the section you wish to switch
on; the corresponding symbol lights
up yellow.
^Touch the ON/OFF button until the
temperature display lights up, or
^switch the appliance off and then
back on again.The settings mode
Certain appliance settings can only be
selected in the settings mode.
How to enter the settings mode and
how to change the settings is
described in the respective chapters.
Overview...

Turning the button sound on and off
If you prefer the buttons to be silent
when touched, you can turn the button
sound off.
^Touch thebutton and keep your
finger on the button.
^Now tap the ON/OFF button once
(WITHOUT releasing thebutton!).
^Keep your finger on thebutton for
another 5 seconds untilcis
displayed.
^Again tap thebutton repeatedly
untilbis displayed.
^Tap the ON/OFF button to confirm.
^
By tapping thebutton, you can
now select whether you would like
the button sound to be on or off:
b0:...

^Whenever you finish changing a
setting, tap the ON/OFF button to
confirm.
^Keep tapping thebutton untilcis
displayed.
^Tap the ON/OFF button.
You have left the settings mode.
When the safety lock is activated, the
safety lock indicator
Xwill light up
show in the temperature display.
Switching off for extended
periods of time
If the appliance is not needed for a
longer period of time:
^switch the appliance off,
^unplug it from the socket,
^clean the appliance and
^leave the doors ajar to prevent any...

The correct temperature is very
important for storing food. If food is not
stored at the correct temperature,
bacteria can multiply rapidly, causing
the food to spoil. This can be prevented
or slowed down by selecting the
correct temperature. Temperature
affects the rate at which bacteria can
multiply. Reducing the temperature
slows down this process.
The temperature in the appliance will
rise for the following reasons:
–if you open the door frequently, or
keep it open too long,
– if you put too much...

Setting the temperature
The temperatures for the refrigerator
section and the freezer section are set
separately.
^ Select the refrigerator or the freezer
section.
The Refrigerator or Freezer symbol
lights up yellow.
^ Set the temperature with the buttons
beside the display.
Tap the
 button: to decrease the temperature
 button: to increase the temperature.
The temperature being set will flash in
the display.
When you tap the buttons, you will see
the following changes in the
temperature display:
–...

Changing the brightness of the
temperature display
You can adjust the brightness of the
temperature display to suit the lighting
conditions of the room.
^Touch thebutton and keep your
finger on the button.
^Now tap once on the ON/OFF button
(WITHOUT releasing thebutton!).
^Keep the finger on thebutton for
another 5 seconds untilcis
displayed.
^Again tap thebutton untildis
displayed.
^
Tap the ON/OFF button to confirm.
^
By tapping thebutton you can now
change the brightness of the
temperature...