Home > Miele > Fridge freezer > Miele K 8967 Operating And Installation Instructions

Miele K 8967 Operating And Installation Instructions

Here you can view all the pages of manual Miele K 8967 Operating And Installation Instructions. The Miele manuals for Fridge freezer are available online for free. You can easily download all the documents as PDF.

Page 11

Normal energy consumption Increased energy
consumption
Installation siteIn a ventilated room. In an enclosed, unventilated room.
Protected from direct sunlight. In direct sunlight.
Not situated near to a heat source
(radiator, oven).Situated near to a heat source
(radiator, oven).
Where the ambient room
temperature is ideal at approx.
20°C.Where there is a high ambient
room temperature.
Temperature setting with
a thermostat which is
approximate (set in
stages).With a medium setting of 2 to 3. With a high...

Page 12

Normal energy
consumptionIncreased energy
consumption
DefrostingDefrost the freezer when a layer of
ice one centimetre thick has built
up.A layer of ice hinders the cold
from reaching the frozen food, and
causes an increase in energy
consumption.
How to save energy
12
 

Page 13

Before using for the first time
The stainless steel surface has a layer
of protective foil to prevent scratching
during transportation.
^Do not remove this foil until the
appliance has been installed or built
in. Start at one of the upper corners.
^Clean stainless steel surfaces with a
suitable conditioning agent for
stainless steel.
^Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct...

Page 14

The safety lock indicator lightXwill
light up when the safety lock has been
activated.
^Press the On/Off button to come out
of the setting mode.
Otherwise the electronics will revert to
normal operation after a couple of
minutes.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,
^switch the appliance off,
^switch off at the wall socket and
withdraw the plug,
^clean the appliance out and
^
leave the door ajar to air the...

Page 15

It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
The temperature in the appliance will
rise:
–the more often the door is opened
and the longer it is kept open,
– if too much food is stored in it at
once,
– the warmer the food is which is being
put...

Page 16

If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very fullandfor
approx. 24 hours if the appliance is
full, before checking the temperature
display as it will take this long for the
display to show the accurate
temperature of the appliance. If, after
this time, the temperature is still too
high or too low, you will need to adjust it
again.
Temperature range
The temperature can be adjusted from:
4 °C to 9 °C
The ambient temperature in the room
and the installation...

Page 17

Temperature display
During normal operation, the
temperature display on the control
panel shows the average temperature
in the refrigerator section.
If the temperature is not within the
range that the appliance is able to
display (0 °C to 19 °C), bars will flash in
the temperature display.
Thetemperature display will flash, if
–a different temperature is being set,
–the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
This loss of coldness...

Page 18

Your appliance has been fitted with an
alarm to avoid energy being wasted if
the door is left open and to prevent
stored food becoming too warm.
The alarm will sound if the door is left
open for more than approx. 60
seconds. The alarm will stop as soon as
the door is closed.
If you want to keep the door open for
more than approx. 60 seconds,
intentionally, we recommend that you
switch the alarm off.Switching the alarm off early
^Press the alarm button.
The alarm will stop.
Switching on the alarm system...

Page 19

Super cool
The Super cool function can be used to
rapidly reduce the temperature in the
refrigerator section to its lowest setting
(depending on the room temperature).
Switching on Super cool
Super cool is particularly
recommended for faster chilling of
large amounts of fresh food or drink.
^Press the Super cool button. The
Super cool indicator light will come
on.
The appliance works at full power to
lower the temperature in the
appliance.Switching off Super cool
The Super cool function switches itself...

Page 20

Different storage zones
Due to the natural circulation of the air
in the appliance, there are different
temperature zones in the refrigerator
section. Cold, heavy air sinks to the
lowest section of the appliance. Make
use of the different zones when placing
food in the appliance.
Warmest area
The warmest area is in the top section
of the door. Use this for storing butter
and cheese.
Coldest area
The coldest area in a refrigerator is
normally directly above the vegetable
containers. In this appliance,...
Start reading Miele K 8967 Operating And Installation Instructions

Related Manuals for Miele K 8967 Operating And Installation Instructions

All Miele manuals